Datasheet

HDMIULC6-4SC6Y Technical information
Doc ID 018879 Rev 2 9/12
Figure 16. Analog crosstalk measurements
Figure 16 gives the measurement circuit for the analog application. In usual frequency range
of analog signals (up to 240 MHz) the effect on disturbed line is less than -45 dB (see
Figure 17).
Figure 17. Analog crosstalk results
As the HDMIULC6-4SC6Y is designed to protect high speed data lines, it must ensure a
good transmission of operating signals. The frequency response (Figure 5.) gives
attenuation information and shows that the HDMIULC6-4SC6Y is well suitable for data line
transmission up to 3.2 Gb/s.
NETWORK ANALYSER
PORT 2
NETWORK ANALYSER
PORT 1
TEST BOARD
NETWORK ANALYSER
PORT 2
NETWORK ANALYSER
PORT 1
TEST BOARD
100.0k 1.0M 10.0M 100.0M 1.0G
- 120.00
- 90.00
- 60.00
- 30.00
0.00
dB
F (Hz)