Datasheet

April 2010 Doc ID 15516 Rev 2 1/9
9
HDMI05-CL02F3
5-line IPAD™, HDMI™ control line ESD protection
Features
Low line capacitance: 12 pF max.
High efficiency in ESD protection
Lead-free package
Very thin package
High reliability offered by monolithic integration
High reduction of parasitic elements through
integration and wafer level packaging
Complies with the standards:
IEC 61000-4-2 Level 4
± 15 kV (air discharge)
± 8 kV (contact discharge)
IEC 61000-4-2 Level 1
± 2 kV (air discharge)
± 2 kV (contact discharge)
Application
Where ESD protection for HDMI control lines
(CEC, HPD, SCL and SDA) is required:
Mobile phones and communication systems
Portable multimedia players
Camcorder, digital still cameras
Description
The HDMI05-CL02F3 chip is a low capacitance
ESD protection for HDMI control pins. It also
integrates pull-up resistor for I²C bus and pull-
down resistor for hot plug detect and pull-up
resistor for CEC line.
The ESD protection circuitry prevents damage to
the protected device when subjected to ESD
surges up to 15 kV.
Figure 1. Pin configuration (bump side)
Figure 2. Schematic
TM: IPAD is a trademark of STMicroelectronics. HDMI, the
HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI
Licensing LLC.
Flip Chip
9 bumps
B
C
123
A
SCL
CEC
SDA
HPD
GND
GND
RPU2
RPU
5V
SCL
SDA
HPD
CEC
5V
B2 and C2 are ground pins
C1
A2
A1
A3
B3
C3
R1
R2
R3
R4
B1
www.st.com

Summary of content (9 pages)