Datasheet

Board description EVAL6480H
2/12 Doc ID 023675 Rev 1
1 Board description
Figure 1. Jumper and connector location
Table 1. EVAL6480H electrical specifications
Parameter Value
Supply voltage (VS) 10.5 to 85 V
Maximum output current (each phase) 25 A
r.m.s.
at 25 °C
(1)
1. Refer to STD25F10 datasheet for details.
External MOSFET R
ds(ON)
33 mΩ typical at 25 °C
(1)
Gate driver supply voltage (VCC) 7.5 V to 15 V
Logic supply voltage 3.3 V
Logic interface supply voltage 3.3 V or 5 V
Low level logic inputs 0 V
High level logic input VDD
(2)
2. All logic inputs are 5 V tolerant.
Operating temperature -25 °C to +125 °C
FLAG LED
Supply management
jumpers
Phase A
connector
Phase B
connector
Master SPI
connector
Application
area
Slave SPI
connector
External switch
connector
(SW input)
Motor supply voltage
compensation regulation
(ADCIN input)
Power supply connector
(10.5 V - 85 V)
Supply management
connector
(VS, VSREG, VCCREG and GND)
BUSY LED
AM14874v1