Datasheet
Table Of Contents
- 1 Board description
- Table 1. EVAL6470H specifications
- Figure 1. Jumpers and connectors location
- Table 2. Jumpers and connectors description
- Table 3. Master SPI connector pinout (J10)
- Table 4. Slave SPI connector pinout (J11)
- Figure 2. EVAL6470H - schematic
- Table 5. EVAL6470H - bill of material
- Figure 3. EVAL6470H - layout (silk screen)
- Figure 4. EVAL6470H - layout (top layer)
- Figure 5. EVAL6470H - layout (inner layer 2)
- Figure 6. EVAL6470H - layout (inner layer 3)
- Figure 7. EVAL6470H - layout (bottom layer)
- 1.1 Thermal data
- 2 Revision history
Board description EVAL6470H
4/11 Doc ID 022736 Rev 2
3 Ground Ground
4 Supply EXT_VDD (can be used as external logic power supply)
5 Digital output SPI Master-In Slave-Out signal (connected to pin 5 of J10)
6 Digital input SPI serial clock signal (connected to L6470 CK input)
7 Digital input
SPI Master-Out Slave-In signal (connected to L6470 SDO
output)
8 Digital input SPI slave select signal (connected to L6470 CS input)
9 Digital input L6470 step-clock input
10 Digital input L6470 STBY/RST input
Table 4. Slave SPI connector pinout (J11) (continued)
Pin number Type Description