Datasheet

DocID16923 Rev 3 5/11
ESDAXLC6-1MY2 Package information
11
3 Package information
• Epoxy meets UL 94, V0
• Lead-free package
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
®
specifications, grade definitions and product status are available at: www.st.com
.
ECOPACK
®
is an ST trademark.
Note: Product marking may be rotated by 90° for assembly plant differentiation. In no case should
this product marking be used to orient the component for its placement on a PCB. Only pin
1 mark is to be used for this purpose.
Table 3. µQFN-2L dimensions
Ref.
Dimensions
Millimeters Inches
Min. Typ. Max. Min. Typ. Max.
A 0.40 0.47 0.50 0.016 0.019 0.020
A1 0.00 0.05 0.000 0.002
b1 0.45 0.50 0.55 0.018 0.020 0.022
b2 0.45 0.50 0.55 0.018 0.020 0.022
D 0.55 0.60 0.65 0.022 0.024 0.026
E 0.95 1.00 1.05 0.037 0.039 0.041
e 0.60 0.65 0.70 0.024 0.026 0.028
L1 0.20 0.25 0.30 0.008 0.010 0.012
L2 0.20 0.25 0.30 0.008 0.010 0.012
Figure 10. Footprint (dimensions in mm) Figure 11. Marking
PIN # 1 ID
E
D
A1
A
L1
e
L2
b2b1
0.55
0.40
0.50
0.55
Pin1
Pin 2
7