Datasheet

ESDAVLC8-1BM2, ESDAVLC8-1BT2 Package information
Doc ID 16937 Rev 2 7/14
Note: Product marking may be rotated by multiples of 90° for assembly plant differentiation. In no
case should this product marking be used to orient the component for its placement on a
PCB. Only pin 1 mark is to be used for this purpose.
Figure 19. SOD882 tape and reel specifications
Figure 17. SOD882 footprint in mm (inches) Figure 18. SOD882 marking
0.55
0.40
0.50
0.55
0.022
0.020
0.022
0.016
Pin1
Pin 2
I
User direction of unreeling
All dimensions in mm
4.0 ± 0.1
2.0 ± 0.05
8.0 + 0.3 /-0.1
2.0 ± 0.10
1.75 ± 0.1
3.5 ±- 0.05
Ø 1.50 ± 0.10
0.68 ± 0.05
0.20 ± 0.05
1.10 ± 0.05
X X
X X
X
X
X
0.66 ± 0.05
Bar indicates Pin 1