Datasheet
Package information ESDALC6V1M3
6/12 Doc ID 11555 Rev 5
3 Package information
● Epoxy meets UL94, V0
● Lead-free packages
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
®
specifications, grade definitions and product status are available at: www.st.com
.
ECOPACK
®
is an ST trademark.
Note: Product marking may be rotated by 90° for assembly plant differentiation. In no case should
this product marking be used to orient the component for its placement on a PCB. Only pin 1
mark is to be used for this purpose.
Table 3. SOT883 dimensions
Ref.
Dimensions
Millimeters Inches
Min. Typ. Max. Min. Typ. Max.
A 0.40 0.50 0.016 0.02
A1 0.00 0.05 0.00 0.002
b1 0.10 0.15 0.20 0.004 0.006 0.007
b2 0.45 0.50 0.55 0.018 0.020 0.021
D 0.55 0.60 0.65 0.022 0.024 0.026
E 0.95 1.00 1.05 0.037 0.039 0.041
e 0.30 0.35 0.40 0.012 0.014 0.015
e1 0.60 0.65 0.70 0.024 0.026 0.027
L1 0.20 0.25 0.30 0.008 0.010 0.012
L2 0.20 0.25 0.30 0.008 0.010 0.012
E
D
A
A1
b2
3
L2L1
e1
1
e
b1
2
Figure 14. Footprint Figure 15. Marking
0.40 0.40
0.30
0.20
0.25
0.70
All dimensions in mm
K
2
1
3