User Manual

© 2010 DiZiC Co. Ltd, 3F, N° 4-2 Jin Xi Street Taipei City 104, TAIWAN Email: [e-mail] | Web: www.dizic.com
All Rights Reserved. All trademarks are property of their respective owners. Subject to change without notice.
Document ID: PB-ZB-MOD-003-20DS
4.5 RF CHARACTERISTIC
4.5.1 Receiver
Table 4.7 Receiver characteristics
Parameter
Conditions
Typical value for module
(Power Level Option)
Unit
"S"
Standard
"R"
Front End
"T"
Front End
Frequency range
2400 - 2500
MHz
Sensitivity (boost mode)
1% PER, 20 byte packet defined by
IEEE 802.15.4-2003
-100
TBD
-105
dBm
Sensitivity
1% PER, 20 byte packet defined by
IEEE 802.15.4-2003
-99
TBD
-104
dBm
Co-channel rejection
IEEE 802.15.4 signal at -82 dBm
-6
dBc
Relative frequency error (2 x 40 ppm
required by IEEE 802.15.4)
-120 … +120
ppm
Relative timing error (2 x 40 ppm
required by IEEE 802.15.4)
-120 … +120
ppm
Linear RSSI range
As defined by IEEE 802.15.4
40
dB
RSSI Range
-90 … -30
dBm
4.5.2 Transmitter
Table 4.8 Transmitter characteristics
Parameter
Conditions
Typical value for module
(Power Level Option)
Unit
"S"
Standard
"R"
Front End
"T"
Front End
Maximum output power (boost mode)
At highest power setting
7
20
20
dBm
Maximum output power
At highest power setting
3
20
20
dBm
Minimum output power
At lowest power setting
-32
-9
-9
dBm
Error vector magnitude
As defined by IEEE 802.15.4, which
sets a 35% maximum
5 … 15
%
Carrier frequency error
-40 … +40
ppm
PSD mask relative
3,5 MHz away
-20
dB
PSD mask absolute
3,5 MHz away
-30
dBm