User Manual

© 2010 DiZiC Co. Ltd, 3F, N° 4-2 Jin Xi Street Taipei City 104, TAIWAN Email: [e-mail] | Web: www.dizic.com
All Rights Reserved. All trademarks are property of their respective owners. Subject to change without notice.
Document ID: PB-ZB-MOD-003-20DS
4.4 DC CHARACTERISTICS
Table 4.6 DC electrical characteristics
Parameter
Conditions
Typical value for module
(Power Level Option)
Unit
"S"
Standard
"R"
Front End
"T"
Front End
Regulator input voltage (VDD_PADS)
2,0 - 3,6
V
Deep Sleep Current
Quiescent current, internal RC
oscillator disabled
-40°C, VDD_PADS = 3,6 V
0,4
μA
+25°C, VDD_PADS = 3,6 V
0,4
5,4
0,7
μA
+85°C, VDD_PADS = 3,6 V
0,6
μA
Quiescent current, including internal
RC oscillator
-40°C, VDD_PADS = 3.6 V
0,7
μA
+25°C, VDD_PADS = 3.6 V
0,8
5,8
1,1
μA
+85°C, VDD_PADS = 3.6 V
1,2
μA
Quiescent current, including 32.768
kHz oscillator
-40°C, VDD_PADS = 3.6V
1,2
μA
+25°C, VDD_PADS = 3.6 V
1,3
6,3
1,6
μA
+85°C, VDD_PADS = 3.6 V
1,7
μA
Quiescent current, including internal
RC oscillator and 32.768 kHz oscillator
-40°C, VDD_PADS = 3.6V
1,4
μA
+25°C, VDD_PADS = 3.6V
1,5
6,5
1,8
μA
+85°C, VDD_PADS = 3.6 V
2
μA
Simulated deep sleep (debug mode)
current
With no debugger activity
200
μA
Reset current
Quiescent current, nRESET asserted
Typical at 25°C/3 V Max at 85°C/3.6 V
1,2
1,2
1,2
mA
Processor and peripheral currents
ARM® Cortex-M3, RAM, and flash
memory
25°C, 1.8 V memory and 1.25 V core
ARM® Cortex-M3 running at 12 MHz
from crystal oscillator Radio and all
peripherals off
8.0
8.0
8.0
mA
ARM® Cortex-M3, RAM, and flash
memory
25°C, 1.8 V memory and 1.25 V core
ARM® Cortex-M3 running at 24 MHz
from crystal oscillator Radio and all
peripherals off
9.0
9.0
9.0
mA
ARM® Cortex-M3, RAM, and flash
memory sleep current
25°C, 1.8 V memory and 1.25 V core
ARM® Cortex-M3 clocked at 12 MHz
from the crystal oscillator Radio and all
peripherals off
4.0
4.0
4.0
mA
ARM® Cortex-M3, RAM, and flash
memory sleep current
25°C, 1.8 V memory and 1.25 V core
ARM® Cortex-M3 clocked at 6 MHz
from the high frequency RC oscillator
Radio and all peripherals off
2.0
2.0
2.0
mA
Serial controller current
For each controller at maximum data
rate
0.2
0.2
0.2
mA
General purpose timer current
For each timer at maximum clock rate
0.1
0.1
0.1
mA
General purpose ADC current
At maximum sample rate, DMA
enabled
1,1
1,1
1,1
mA