Data Sheet

BLUENRG-M2Sx
18
8.4 Bluetooth certification
The module with embedded stack and profile has been qualified in accordance with
SIG qualification rules:
 Declaration ID: TBD (under review)
 Qualified design ID: TBD (under review)
 Product type: End Product
 Core spec version: 5.0
 Product description: Bluetooth low energy v5.0 module
a. ETSI EN 300 328 V 2.1.1 (2016 11): “electromagnetic compatibility and radio spectrum Matters (ERM);
Wideband transmission systems; data transmission equipment operating in the 2.4 GHZ ISM band and
using wideband modulation techniques; harmonized EN covering essential requirements under article 3.2
of the R&TTE directive”.
b. ETSI EN 301 489-17 V 3.1.1 (2017 02): “electromagnetic compatibility and radio spectrum Matters (ERM);
electromagnetic compatibility (EMC) standard for radio equipment and services; part 17: specific condition
for
2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment”.
c. ETSI EN 301 489-1 V2.1.1 (2017 02): “electromagnetic compatibility and radio spectrum Matters
(ERM); electromagnetic compatibility (EMC) standard for radio equipment and services; part 1:
Common technical requirements”.
d. EN60950-1:2006 +A11:2009+A1:2010+A12:2011+A2:2013: “Information technology equipment - safety”.
9 Ordering information
Table 8. Ordering information
Order code
Description
Packing MOQ
BLUENRG-M2SA Bluetooth® V5.0 low energy
module
Tape and reel 1000 pcs
BLUENRG-M2SP Bluetooth® V5.0 low energy
module
Tape and reel 1000 pcs
10
ECOPACK
®
In order to meet environmental requirements, ST offers these devices in different grades
of ECOPACK
®
packages, depending on their level of environmental compliance.
ECOPACK
®
specifications, grade definitions and product status are available at:
www.st.com.
ECOPACK
®
is an ST trademark.
The module has obtained the RED certificate: No. TBD (under review)
The Certificate of Conformity is available / downloadable at the following web page:
www.ST.com/product/bluenrg-m2sa and www.ST.com/product/bluenrg-m2sp
The certified module production firmware release is: 2.X
For additional information please refer to:
STMicroelectronics Via C. Olivetti 2, Agrate Brianza 20864 (ITALY)
 EN 300 328 V 2.1.1 (2016-11)
(a)
 ETSI EN 301 489-17 V3.1.1 (2017-02)
(b)
 ETSI EN 301 489-1 V2.1.1 (2017-02)
(c)
 EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
(d)
 EN 62311:2008
The module is provided by CE marking:
CE certification
The BLUENRG-M2Sx module has been certified according to the following certification rules:
8.3