Data Sheet

BlueNRG-M2SA
P a g e | 8 Rev. 0.1
4 Hardware specifications
General conditions (V
IN
= 3.3 V and 25 °C)
4.1 Absolute maximum ratings
Rating Min Typ. Max Unit
Storage temperature range -40 - +85 °C
Supply voltage, V
IN
-0.3 - 3.9 V
I/O pin Voltage (V
IO
five-volt tolerant pin) -0.3 - 3.9 V
RF saturation input power - 8 - dBm
Table 1: Absolute maximum ratings
4.2 Recommended operating conditions
Rating Min Typ. Max Unit
Storage temperature range -40 - +85 °C
Supply voltage, V
IN
1.7 3.3 3.6 V
Signals & I/O pin voltage
(according supply voltage)
1.7 - 3.6 V
Table 2: Recommended operating conditions
4.3 Radio Features
Rating Min Typ. Max Unit
Bluetooth version - 5.0 -
Radiated transmit power +8 dBm
Receiver sensitivity
-88 dBm
RF Frequency 2402 - 2480 MHz
HS_Startup_Time (*) 512 µs
Table 3: Radio features
(*) The HS_Startup_Time has been measured according to the “Bringing up the BlueNRG-2 device”
(AN4818). The HS_Startup_Time parameter is important because it permits minimization of the
current consumption. A value that is too short prevents the BLUENRG-M2SA from correctly
sending/receiving packets. Users should set the typical value as indicated in Table 3.