Data Sheet

11/19
DocID027851 Rev 1.0
BLUENRG-M0x
6 Mechanical dimensions
Figure 9. Mechanical dimensions
Figure 10. Recommend land pattern top view
7 Hardware design
BLUENRG-M0x module supports SPI hardware interfaces.
Note: - All unused pins should be left floating; do not ground.
- All GND pins must be well grounded.
- The area around the module should be free of any ground planes, power planes,
trace routings, or metal for 6 mm from the module antenna position, in all directions.
- Traces should not be routed underneath the module.
7.1 Reflow soldering