Datasheet

4/4

Cooling method : by convection and conduction

Marking: clear, ring at cathode end.

Weight: 0.15g

PACKAGE MECHANICAL DATA

DO 35 Glass

note 2

BA B

note 1

REF.

DIMENSIONS

NOTES

Millimeters Inches

Min. Max. Min. Max.

A 3.050 4.500 0.120 0.117

1 - The lead diameter ∅ D is not controlled over zone E

2 - The minimum axial lengh within which the device may be placed

with its leads bent at right angles is 0.59”(15 mm)

B 12.7 0.500

∅ C

1.530 2.000 0.060 0.079

∅ D

0.458 0.558 0.018 0.022

E 1.27 0.050

Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the

consequences of use of such information nor for any infringement of patents or other rights of thirdparties which may result from its use. No

license isgranted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned

in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied.

SGS-THOMSON Microelectronics products are notauthorized for useas critical components in life support devices or systems without express

written approval of SGS-THOMSON Microelectronics.

SGS-THOMSON Microelectronics GROUP OF COMPANIES

Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands

- Singapore - Spain - Sweden - Switzerland - Taiwan - United Kingdom - U.S.A.

BAT 41