Datasheet

Pin settings B5973D
4/44 DocID14117 Rev 4
1 Pin settings
1.1 Pin connection
Figure 2. Pin connection (top view)
1.2 Pin description
287
6<1&
,1+
&203
9&&
*1'
95()
)%
$0
Table 1. Pin description
N° Pin Description
1 OUT Regulator output.
2 SYNCH Master/slave synchronization.
3INH
A logical signal (active high) disables the device. If INH not used
the pin must be grounded. When it is open an internal pull-up
disable the device.
4 COMP E/A output for frequency compensation.
5FB
Feedback input. Connecting directly to this pin results in an output
voltage of 1.23 V. An external resistive divider is required for higher
output voltages.
6 VREF 3.3 V V
REF
. No cap. is requested for stability.
7 GND Ground.
8 VCC Unregulated DC input voltage.