Product Manual

Included: (1x) FLEXIT Headlamp PRO, (1x) 18650 Lithium-ion, (1x) Micro-USB cable, (1x) Carry pouch
Model # 00387
1 Year warranty
Troutman, NC | 704-508-1031 | [e-mail] | STKRconcepts.com
BATTERY INSTALLATION
1) Pull tab to open battery case 2) Place 1x 18650
Lithium-ion rechargeable battery into the battery terminal.
KILL SWITCH
!! Before use make sure Kill Switch is in Power ON position
Prevent headlamp from accidentally turning on during
transportation.
POWER ON: Open battery case and slide kill switch to the
LEFT position to provide power to the headlamp.
POWER OFF: Open battery case and slide kill switch to the
RIGHT position to turn power o to headlamp.
PATENT PENDING
CLEAN & CARE
Hand-wash Foam & Strap with mild soap.
Do not submerge in water. Not machine washable.
Strap
Comfort Fit
Foam
Open Tab
Battery
Micro-USB
port
Battery Level
Indicator
CHARGING
1) Plug the micro-USB cable into the micro-USB port 2)
plug the other end of the cable into a USB wall charger*,
USB car charger*, or any other USB charging device* (e.g.
computer). *Not included. *Charger output of 1A to 2.1A is
recommended. Charger output should NOT exceed 2.1A
to prevent battery damage.
- - Battery Level Indicator lights blink while charging then
solid glow when fully charged.
**Please recharge a stored unit every four months to
maintain optimum performance of the lithium-ion batteries
and maximize charging levels. Battery excl. from warranty.
Kill Switch
(shown in the POWER
ON position, slide to
the right to POWER
OFF)
+
_