DVR User's Manual

Network Setup
Accessing the DVR using the Remote Software for CASE B
REMOTE ACCESS:
To access the DVR via WLAN, open the remote viewing software and click on the “Settings” button.
Now add the correct IP address to match that of the DVR you wish to connect to.
1. Public IP address of 10.10.10.101
2. Port: 50000 (this has to match what is configured in the DVR)
3. User ID: (always leave the default “admin“)
4. Password: this must match what is configured in the DVR
a. 4,8,16 channel default password: (NO PASSWORD) - leave blank.