Warranty

BULB REPLACEMENT
To replace Bulb on Stinger
®
Cordless Insect Zapper Lantern &
On-the-Go Insect Zapper (Models: BKC90 and BKC40 Series)
1. Ensure that unit is off and adaptor plug is disengaged.
2. Remove bug tray and turn unit upside down.
(Fig. 1)
3. Pull old bulb straight out and recycle safely.
(Fig. 2)
4. Insert new bulb into socket
making sure the prongs of the
bulb are seated properly. (Fig. 3)
The ultraviolet spectrum of this bulb helps attract flying insects
to the Stinger Insect Zapper.
• Replace bulbs annually to maintain optimal effectiveness.
Bulb contains Mercury. Dispose according to local, state, or federal laws.
Fig. 1
(BKC40)
Fig. 3
(BKC40)
Fig. 2
(BKC40)