User Manual

6
Pairing the Tracker with Your Phone
1) Please ensure your phone’s Bluetooth is enabled before beginning the
pairing process.
2) Open the
VeryFitPro app on your smartphone and go to the "Device"
page, tap "Pair device", then your smartphone starts searching devices.
3) In the list of found devices that appear on your phone, tap "ID115Plus
HR" to connect the tracker to your smartphone. (If your phone failed to
find ID115Plus HR, please tap the touch key to wake the tracker and search
the tracker on your phone again.)
Notes:
Once the tracker is connected to your app, the tracker will automatically
search and reconnect itself if the connection is lost or when Bluetooth is
restarted after manual disconnection.
If the tracker is unbound from the app, the information on the tracker will
be reset, and the information on the app will be cleared. Please do not
unbind the connection unless there is an issue that will require a reset.
The tracker can only pair with one Bluetooth device at a time. When
pairing, please ensure there are no other Bluetooth devices nearby.