Owner's Manual

SR 430, SR 450
English
13
N Slide the wide hose clamp (1) onto
the pleated hose (4).
N Secure the wide hose clamp (1) with
the screw (5) – the blower tube (2)
must still rotate.
Fitting the pleated hose on the elbow
– SR 430 only
N Slide the narrow hose clamp (6)
(bezel facing left) onto the elbow
and line it up.
N Push the pleated hose (4) over the
elbow (7).
N Slide the narrow hose clamp (6)
onto the pleated hose (4).
N Secure the hose clamp (6) with the
screw (8) from the side facing the
operator.
Fitting the antistatic system – SR 450
only
N Attach the antistatic wire (1) and
chain (2) to the blower housing with
screw (3).
Fitting the pleated hose on the elbow
– SR 450 only
N Push the antistatic wire (9) into the
pleated hose (4).
N Slide the narrow hose clamp (6)
(bezel facing left) onto the elbow
and line it up.
N Push the antistatic wire (9) between
the ends of the narrow hose
clamp (6).
N Push the pleated hose (4) over the
elbow (7).
5
4
0002BA005 KN
1
2
7
6
0002BA006 KN
4
6
8
4
6
8
0002BA007 KN
3
1
2
0002BA054 KN
9
0002BA008 KN
4
9
6
0002BA009 KN
7
4