Operation Manual

SR 430, SR 450
English
28
Solution container
The selected operating mode is
indicated by the symbols on the
metering unit's housing.
N Position A – Mistblowing mode
N Position B – Dusting and spreading
mode
N Insert a suitable tool (e.g.
screwdriver) in the two recesses
(arrows) to loosen the strainer (1).
N Pull the strainer (1) upward and out
of the solution container.
N Squeeze the tabs (2) together and
pull the lever (3) outwards.
N Remove the solution container from
the metering unit's housing (4) and
turn it to position B (dusting and
spreading mode).
N Thoroughly clean the plastic pins
and the sealing face on the solution
container – check that there is no
residue.
N Thoroughly clean the holes and
sealing face on the metering unit (4)
– check that there is no residue.
N Fit the solution tank on the metering
unit's housing (4).
N Hook the lever (3) over the bar (5)
on the solution container.
A
0000-GXX-1166-A0
B
0002BA062 KN
2
2
0000-GXX-1167-A0
4
0000-GXX-1168-A0
4
0000-GXX-1169-A0
0000-GXX-1170-A0
5