Operation Manual

SR 430, SR 450
English
21
Before Starting
N Close valve lever (1) for solution
feed.
Additionally on SR 450:
N Close the metering lever (2) for
dusting and spreading mode.
Starting the Engine
N Observe safety precautions.
NOTICE
Start your unit on a clean, dust-free
surface only to ensure that no dust is
sucked in.
N The setting lever must be on F
N Press the manual fuel pump
bulb (3) at least five times – even if
the bulb is filled with fuel.
Cold engine (cold start)
N Press in the choke knob (4) and turn
it to c.
Warm engine (warm start)
N Press in the choke knob (4) and turn
it to o.
Also use this setting if the engine has
been running but is still cold.
Starting / Stopping the
Engine
0002BA060 KN
1
0002BA052 KN
2
0002BA019 KN
0002BA020 KN
H
LA
L
4
0002BA021 KN
4
0002BA022 KN