Instruction Manual

SR 430, SR 450
English
33
Dual deflector screen
Splits the spray jet in two directions.
– Allows two closely planted rows to
be treated simultaneously.
Draining the Solution Container
N Close the valve lever
N Shut off the engine – see "Starting /
Stopping the Engine"
N Turn the dosage piece (1) to
position "6" or "E" and collect the
remaining solution in a suitable
container
Cleaning the Solution Container
N Rinse and clean the solution
container and hose system with
clear water
N Dispose of remaining spray solution
and rinsing liquid in accordance with
local environmental requirements –
follow maker's instructions
N Allow the machine to dry with the
cap removed
If strainer is dirty:
N Insert a suitable tool (e.g.
screwdriver) in the two recesses
(arrows) to loosen the strainer (1)
N Pull the strainer (1) upward and out
of the solution container
N Clean the strainer (2) with clear
water and a brush
After Dusting and Spreading – SR 450
only
N Run the unit until the solution
container is completely empty
N Close the dosage lever
N Shut off the engine – see "Starting /
Stopping the Engine"
N Rinse and clean the solution
container with clear water
372BA008 KN
After Finishing Work
1
2431BA014 KN
0002BA062 KN
0002BA045 KN
2