Instruction Manual

SR 430, SR 450
English
31
N Rotate the nozzle (4) until the
lugs (5) are covered.
N Pull the nozzle (4) off the blower
tube (6).
Converting back to misblowing mode
The conversion is carried out in the
reverse sequence.
Fitting the hose
N Push the hose with clamp (2) over
the stub on the control handle.
N Use pliers to squeeze the hose
clamp together (2) until the retaining
strip engages and locks.
N The gasket (1) in the cap must be in
good condition, lubricated with
grease and clean.
N Stand the machine on a level
surface.
N Do not exceed maximum level of 3.7
gal (14 liters) (arrow).
Mistblowing
N Close valve lever (1) for solution
feed.
N Pour thoroughly mixed spray
solution into the container through
the strainer.
N Fit the cap and tighten it down
firmly.
0002BA037 KN
6
5
4
2
0002BA038 KN
Filling the Container
372BA021 KN
1
0002BA039 KN
0002BA060 KN
1
0002BA041 KN