Instruction Manual

SR 430, SR 450
English
29
SR 450 only.
Metering lever
The discharge rate is infinitely variable
with the metering lever (1).
N Position A (metering lever vertical) –
feed closed
N Position B (metering level parallel to
blower tube) – feed open
Discharge rates
The discharge rate is dependent on the
density and grain size of the product
used.
Conversion from mistblowing to dusting
and spreading mode
N Empty and clean the solution
container – see "After Finishing
Work".
N Close the valve lever (1) for solution
feed.
N Close the metering lever (2) for
dusting and spreading mode.
Solution container
The selected operating mode is
indicated by the symbols on the
metering unit's housing.
N Position A – Mistblowing mode
N Position B – Dusting and spreading
mode
N Insert a suitable tool (e.g.
screwdriver) in the two recesses
(arrows) to loosen the strainer (1).
N Pull the strainer (1) upward and out
of the solution container.
Dusting and Spreading Mode
Granulate 0 - 9 kg/min
Powder 0 - 3 kg/min
0002BA028 KN
1
1
A
B
0002BA060 KN
1
0002BA052 KN
2
A
0000-GXX-1166-A0
B
0002BA062 KN