Instruction Manual

SR 430, SR 450
English
16
N Push the ring seal (3) (wide lip
facing left) onto the stub on the
blower tube (2).
N Push the pleated hose (4) over the
ring seal (3).
N Push the hose clamp (1) onto the
pleated hose (4).
N Line up the marks on the hose
clamp (1) and blower tube (2) – as
shown.
N Secure the hose clamp (1) with the
screw (5) – the blower tube (2) must
still rotate.
Fitting the pleated hose on the elbow –
SR 430 only
N Push narrow hose clamp (1), marks
facing left, onto the elbow (2).
N Push the pleated hose (3) onto the
elbow (2).
N Push the hose clamp (1) onto the
pleated hose (3).
N Line up the marks on the hose
clamp (1) and elbow (2) – as shown.
N Secure the hose clamp (1) with the
screw (4).
2
3
0002BA074 KN
4
5
4
0002BA075 KN
1
2
2
1
0002BA076 KN
3
1
4
3
1
4
0002BA077 KN
2
2