Owner's Manual

SR 200
English
25
If there is a noticeable loss of engine
power
N Turn the filter cover lock (1)
counterclockwise to the vertical
position.
N Remove the filter cover (2).
N Clean away loose dirt from around
the filter.
N Pull off the adapter (3) and remove
the filter (4).
N Fit a new filter element. As a
temporary measure you can knock it
out on the palm of your hand or blow
it out with compressed air. Do not
wash.
Replace any damaged parts.
Install the filter element.
N Fit the filter in the filter housing and
push the retainer into position.
N Refit the filter cover and turn the
filter cover lock to the horizontal
position
Exhaust emissions are controlled by the
design of the fundamental engine
parameters and components (e.g.
carburation, ignition, timing and valve or
port timing) without the addition of any
major hardware.
Cleaning the Air Filter
2431BA020 KN
1
2
3
4
9928BA011 AM
Engine Management