Owner's Manual

SR 200
English
24
N Close the valve lever.
N Shut off the engine – see "Starting /
Stopping the Engine".
Draining the Solution Container
N Turn metering knob (1) to 6.
N Open the valve lever and drain
remaining solution into a suitable
container.
Cleaning the Solution Container
N Rinse and clean the solution
container and hose system with
clear water.
N Dispose of remaining spray solution
and rinsing liquid in accordance with
local environmental requirements –
follow maker's instructions.
N Allow the unit to dry with the cap
removed.
If strainer is dirty:
N Insert a suitable tool (e.g.
screwdriver) in the two recesses
(arrows) to loosen the strainer (2).
N Pull the strainer (2) upward and out
of the solution container.
N Clean the strainer (2) with clear
water and a brush.
N Store the machine in a dry, high or
locked location sheltered from frost
– out of the reach of children and
other unauthorized persons.
For periods of 3 months or longer
N Drain and clean the fuel tank in a
well ventilated area.
N Dispose of fuel properly in
accordance with local
environmental requirements.
N Run the engine until the carburetor
is dry – this helps prevent the
carburetor diaphragms sticking
together.
N Thoroughly clean the machine – pay
special attention to the cylinder fins
and air filter.
N Do not expose the container to
direct sunlight for unnecessarily
long periods. UV rays can make the
container material brittle, which
could result in leaks or breakage.
After Finishing Work
1
2431BA014 KN
2431BA015 KN
0002BA045 KN
2
Storing the Machine