Owner's Manual

9SG 10
English / USA
: Stand the tank on a level surface.
: Fill up with thoroughly mixed spray
solution – do not exceed maximum
capacity of 0.42 gal. (1.6 L) (arrow).
: Fit the cover and tighten it down
firmly.
Before Spraying
: Select the nozzle to suit the required
spray rate.
: Fit the nozzle on the spray head.
: Move the pump shaft (1) up and
down uniformly – 20 to 30 strokes
are required to build up pressure.
: Rotate the nozzle (2) to adjust the
spray pattern (fine jet or spray mist).
Check operation of pressure relief valve
before spraying.
: Grip the pin (3) on the pressure
relief valve and pull it upwards for a
moment. Air must escape from the
valve.
Filling the Tank
551BA001 KN
551BA002 KN
Spray rate:
Nozzle (black) 9 cu.in/min
150 cm
3
/min
Nozzle
(orange / black)
15 cu.in/min
250 cm
3
/min
Spraying
551BA003 KN
1
551BA006 KN
2
551BA007 KN
3