User Instructions

0478 131 9954 C - EN
168
Resuming operation of the robotic
mower following storage for a long period:
● Prepare the mowing area:
Remove foreign objects and cut high
grass short using a conventional lawn
mower.
● Uncover the docking station and
connect the power supply unit to the
mains supply.
● Charge the battery (Ö 15.8)
● Link the robotic mower and docking
station. (Ö 9.11)
● Remove obstacles and foreign bodies
in the edge area.
Start edge following and check whether
corridors and confined areas can be
travelled on. (Ö 11.13)
● Check the mowing plan and change as
necessary. (Ö 11.7)
● Switch on automatic mowing (Ö 11.7)
● RMI 632 C, RMI 632 PC:
If necessary, activate Standard energy
mode (Ö 11.10) and switch on GPS
protection. (Ö 11.15)
16.9 Removing the docking station
The docking station can also be removed
if the robotic mower is to be stored for
long periods (e.g. winter break).
● Preparing the robotic mower for storage
for a long period (Ö 16.8)
● Disconnect the power supply unit plug
from the mains
● Remove the docking station cover and
open the panel (Ö 9.2)
1 Fold open the right clamping lever (1).
2 Remove the right wire end (2) from the
terminal block.
Close the clamping lever (1) again.
3 Fold open the left clamping lever (3).
4 Remove the left wire end (4) from the
terminal block.
Close the clamping lever (3) again.
● Close the panel (Ö 9.2)
● Guide the right and left wire ends out of
the docking station separately from
each other
● Fit the docking station cover (Ö 9.2)
Pull out the pegs (1), remove the docking
station (2) from the lawn with the power
supply unit connected, clean thoroughly
(with a moist cloth) and put into storage.
● Store the robotic mower together with
the docking station and the power
supply unit in the normal position and in
a dry, closed and dust-free room. Dock
the robotic mower in the docking
station. Make sure that the machine is
kept out of the reach of children.
● Protect the terminals of the perimeter
wire from environmental influences
(e.g. wrap with suitable insulating
tape).
● Reinstall the docking station in the
same way as during initial installation –
in particular connect the right and left
perimeter wire ends on the correct
sides. (Ö 9.1)
Mowing blade:
6309 702 0102
Never place or store objects on the
robotic mower.
The temperature in the storage
room should not fall below 5°C.
The date and time may need to be
corrected following storage for a
long period. Appropriate selection
windows are displayed during initial
operation. If the selection windows
are not automatically displayed,
check the date and time in the
"Settings" menu and correct if
necessary. (Ö 11.10)
17. Standard spare parts