User Instructions

145
DEFRNLIT EN
0478 131 9954 C - EN
Setting starting point 1 to 4
manually:
Determine the distance of the
starting points from the docking
station and define the starting
frequency.
The distance corresponds to that
covered from the docking station to
the starting point in metres, measured in a
clockwise direction.
The starting frequency can be between 0
of 10 mowing operations (0/10) and 10 of
10 mowing operations (10/10).
RMI 632 C, RMI 632 PC:
A radius from 3 m to 30 m around the
starting point can be defined.
11.15 Safety
1. Disab. device
2. Level
3. GPS protect. (RMI 632 C, RMI 632 PC)
4. Change PIN code
5. Start signal
6. Alarm signal
7. Menu signal
8. Keylock
9. Link iMOW® and dock
1. Disab. device:
The disabling device is activated
with OK; the robotic mower can no
longer be operated.
The robotic mower must be disabled prior
to any maintenance or cleaning work, prior
to transportation and prior to inspection.
(Ö 5.2)
● To deactivate the disabling
device, press the illustrated
button combination (Mow button
and OK button).
2. Level:
Four safety levels can be set;
various locks and safety devices are
activated, depending on the level.
– None:
The robotic mower is unprotected.
– Low:
The PIN request is active; a PIN code
must be entered in order to link the
robotic mower and docking station, and
to reset the machine to the default
settings.
– Medium:
As "Low", but the time lock is also
active.
– High:
Entry of a PIN code is always required.
● Select the required level and confirm
with OK; enter the 4-digit PIN code if
necessary.
PIN request:
If the mower is tilted for longer than 10
seconds, the PIN query appears. If the PIN
code is not entered within one minute, an
alarm sounds and automatic operation is
switched off.
Connection lock:
PIN code request prior to linking of the
robotic mower and docking station.
Reset lock:
PIN code query prior to resetting the
machine to the factory defaults.
Time lock:
PIN code query for changing a setting if no
PIN code has been entered for more than
one month.
Setting prot.:
PIN code query when settings are
changed.
3. GPS protect.
(RMI 632 C, RMI 632 PC):
For switching position monitoring on
and off. (Ö 5.10)
4. Change PIN code:
The 4-digit PIN code can be
changed if required.
● First enter the old PIN code and confirm
with OK.
● Then enter the new 4-digit PIN code
and confirm with OK.
Starting points with radius:
When the mowing operation is
started at the respective starting
point, the robotic mower starts by
mowing the partial area within the
circular segment around the
starting point. Only then does it
mow the rest of the mowing area.
The docking station is
defined as starting point 0;
mowing operations are
started from here as standard.
The starting frequency corresponds
to the calculated residual value of
10 out of 10 operations.
Recommendation:
Set the safety level to "Low",
"Medium" or "High".
Recommendation:
Always switch on GPS protection.
Before switching on, enter the
mobile phone number of the
owner in the app (Ö 10.) and set
the safety level "Low", "Medium" or
"High" on the robotic mower.
The "Change PIN code" menu item
is only displayed in the safety levels
"Low", "Medium" or "High".