User Instructions
Table Of Contents
- 1. Inhaltsverzeichnis
- 2. Zu dieser Gebrauchsanleitung
- 3. Gerätebeschreibung
- 4. Wie der Robotermäher arbeitet
- 5. Sicherheitseinrichtungen
- 6. Zu Ihrer Sicherheit
- 7. Symbolbeschreibung
- 8. Lieferumfang
- 9. Erstinstallation
- 9.1 Hinweise zur Dockingstation
- 9.2 Anschlüsse der Dockingstation
- 9.3 Netzleitung an der Dockingstation anschließen
- 9.4 Installationsmaterial
- 9.5 Schnitthöhe einstellen
- 9.6 Hinweise zur ersten Installation
- 9.7 Sprache, Datum, Uhrzeit einstellen
- 9.8 Dockingstation installieren
- 9.9 Begrenzungsdraht verlegen
- 9.10 Begrenzungsdraht anschließen
- 9.11 Robotermäher und Dockingstation koppeln
- 9.12 Installation prüfen
- 9.13 Robotermäher programmieren
- 9.14 Erstinstallation abschließen
- 9.15 Erster Mähvorgang nach der Erstinstallation
- 10. iMOW® App
- 11. Menü
- 11.1 Bedienhinweise
- 11.2 Statusanzeige
- 11.3 Infobereich
- 11.4 Hauptmenü
- 11.5 Start
- 11.6 Heimfahrt
- 11.7 Mähplan
- 11.8 Mehr
- 11.9 Einstellungen
- 11.10 iMOW® – Geräteeinstellungen
- 11.11 Regensensor einstellen
- 11.12 Statusanzeige einstellen
- 11.13 Installation
- 11.14 Startpunkte einstellen
- 11.15 Sicherheit
- 11.16 Service
- 11.17 Information
- 12. Begrenzungsdraht
- 12.1 Verlegung des Begrenzungsdrahts planen
- 12.2 Skizze der Mähfläche anfertigen
- 12.3 Begrenzungsdraht verlegen
- 12.4 Begrenzungsdraht anschließen
- 12.5 Drahtabstände – iMOW® Ruler verwenden
- 12.6 Spitze Ecken
- 12.7 Engstellen
- 12.8 Verbindungsstrecken installieren
- 12.9 Sperrflächen
- 12.10 Nebenflächen
- 12.11 Gassen
- 12.12 Suchschleifen für das versetzte Heimfahren
- 12.13 Kantenexaktes Mähen
- 12.14 Abfallendes Gelände entlang des Begrenzungsdrahts
- 12.15 Drahtreserven installieren
- 12.16 Drahtverbinder verwenden
- 12.17 Enge Randabstände
- 13. Dockingstation
- 14. Hinweise zum Mähen
- 15. Gerät in Betrieb nehmen
- 16. Wartung
- 17. Übliche Ersatzteile
- 18. Zubehör
- 19. Verschleiß minimieren und Schäden vermeiden
- 20. Umweltschutz
- 21. Transport
- 22. EU- Konformitätserklärung
- 23. Technische Daten
- 24. Meldungen
- 25. Fehlersuche
- 26. Serviceplan
- 27. Installationsbeispiele
- 1. Table of contents
- 2. Notes on the instruction manual
- 3. Machine overview
- 4. How the robotic mower works
- 5. Safety devices
- 6. For your safety
- 7. Description of symbols
- 8. Standard equipment
- 9. Initial installation
- 9.1 Notes on the docking station
- 9.2 Docking station connections
- 9.3 Connecting the power cable to the docking station
- 9.4 Installation material
- 9.5 Adjusting the cutting height
- 9.6 Notes on initial installation
- 9.7 Setting the language, date and time
- 9.8 Installing the docking station
- 9.9 Routing the perimeter wire
- 9.10 Connecting the perimeter wire
- 9.11 Linking the robotic mower and docking station
- 9.12 Checking installation
- 9.13 Programming the robotic mower
- 9.14 Completing initial installation
- 9.15 First mowing operation after initial installation
- 10. iMOW® app
- 11. Menu
- 11.1 Operating instructions
- 11.2 Status screen
- 11.3 Information area
- 11.4 Main menu
- 11.5 Start
- 11.6 Drive home
- 11.7 Mowing plan
- 11.8 More
- 11.9 Settings
- 11.10 iMOW® – machine settings
- 11.11 Setting the rain sensor
- 11.12 Setting the status screen
- 11.13 Installation
- 11.14 Setting starting points
- 11.15 Safety
- 11.16 Service
- 11.17 Information
- 12. Perimeter wire
- 12.1 Planning routing of the perimeter wire
- 12.2 Making a sketch of the mowing area
- 12.3 Routing the perimeter wire
- 12.4 Connecting the perimeter wire
- 12.5 Wire clearances – use iMOW® Ruler
- 12.6 Acute corners
- 12.7 Confined areas
- 12.8 Installing linking sections
- 12.9 No-go areas
- 12.10 Secondary areas
- 12.11 Corridors
- 12.12 Guide loops for offset drive home
- 12.13 Accurate mowing along edges
- 12.14 Sloping terrain along the perimeter wire
- 12.15 Installing reserve wire
- 12.16 Using wire connectors
- 12.17 Narrow edge clearances
- 13. Docking station
- 14. Notes on mowing
- 15. Operating the machine
- 16. Maintenance
- 16.1 Maintenance schedule
- 16.2 Cleaning the machine
- 16.3 Checking the mowing blade wear limits
- 16.4 Removing and installing the mowing blade
- 16.5 Sharpening the mowing blade
- 16.6 Removing and installing the carrier plate
- 16.7 Finding a wire break
- 16.8 Storage and winter break
- 16.9 Removing the docking station
- 17. Standard spare parts
- 18. Accessories
- 19. Minimising wear and preventing damage
- 20. Environmental protection
- 21. Transport
- 22. EU - Declaration of conformity
- 23. Technical specifications
- 24. Messages
- 25. Troubleshooting
- 26. Service schedule
- 27. Installation examples
- 1. Sommaire
- 2. À propos de ce manuel d’utilisation
- 3. Description de l’appareil
- 4. Mode de fonctionnement du robot de tonte
- 5. Dispositifs de sécurité
- 6. Consignes de sécurité
- 6.1 Généralités
- 6.2 Vêtements et équipement appropriés
- 6.3 Avertissement – dangers liés au courant électrique
- 6.4 Batterie
- 6.5 Transport de l’appareil
- 6.6 Avant la mise en service
- 6.7 Programmation
- 6.8 Pendant le fonctionnement de l’appareil
- 6.9 Entretien et réparations
- 6.10 Stockage prolongé
- 6.11 Mise au rebut
- 7. Signification des pictogrammes
- 8. Contenu de l’emballage
- 9. Première installation
- 9.1 Remarques concernant la station de base
- 9.2 Branchements de la station de base
- 9.3 Branchement du cordon d'alimentation secteur sur la station de base
- 9.4 Matériel d’installation
- 9.5 Réglage de la hauteur de coupe
- 9.6 Consignes pour la première installation
- 9.7 Réglage de la langue, de la date et de l'heure
- 9.8 Installation de la station de base
- 9.9 Pose du fil de délimitation
- 9.10 Raccordement du fil de délimitation
- 9.11 Connexion du robot de tonte et de la station de base
- 9.12 Contrôle de l'installation
- 9.13 Programmation du robot de tonte
- 9.14 Fin de la première installation
- 9.15 Première tonte après la première installation
- 10. Application iMOW®
- 11. Menu
- 11.1 Remarques relatives à l'utilisation
- 11.2 Écran statut
- 11.3 Zone d'info
- 11.4 Menu principal
- 11.5 Départ
- 11.6 Trajet retour
- 11.7 Plan de tonte
- 11.8 Plus
- 11.9 Réglages
- 11.10 iMOW® – Réglages de l'appareil
- 11.11 Réglage du capteur de pluie
- 11.12 Réglage de l'écran statut
- 11.13 Installation
- 11.14 Réglage des points de départ
- 11.15 Sécurité
- 11.16 Service
- 11.17 Informations
- 12. Fil de délimitation
- 12.1 Planification de la pose du fil de délimitation
- 12.2 Réalisation du croquis de la zone de tonte
- 12.3 Pose du fil de délimitation
- 12.4 Raccordement du fil de délimitation
- 12.5 Distances du fil – Utilisation de l'iMOW® Ruler
- 12.6 Coins pointus
- 12.7 Points d'étranglement
- 12.8 Installation de sections de liaison
- 12.9 Îlots de blocage
- 12.10 Zones annexes
- 12.11 Couloirs
- 12.12 Boucles de recherche pour le trajet retour décalé
- 12.13 Tonte précise des bords
- 12.14 Terrain en pente le long du fil de délimitation
- 12.15 Installation de réserves de fil
- 12.16 Utilisation des connecteurs de fil
- 12.17 Distances étroites en bordure
- 13. Station de base
- 14. Conseils pour la tonte
- 15. Mise en service de l’appareil
- 16. Entretien
- 16.1 Plan d'entretien
- 16.2 Nettoyage de l'appareil
- 16.3 Contrôle des limites d'usure de la lame de coupe
- 16.4 Dépose et repose de la lame de coupe
- 16.5 Affûtage de la lame de coupe
- 16.6 Dépose et repose du disque d'entraînement
- 16.7 Recherche d'une rupture du fil
- 16.8 Rangement de l'appareil et hivernage
- 16.9 Démontage de la station de base
- 17. Pièces de rechange courantes
- 18. Accessoires
- 19. Comment limiter l’usure et éviter les dommages
- 20. Protection de l’environnement
- 21. Transport
- 22. Déclaration de conformité UE
- 23. Caractéristiques techniques
- 24. Messages
- 25. Recherche des pannes
- 26. Feuille d’entretien
- 27. Exemples d’installation
- 1. Inhoudsopgave
- 2. Over deze gebruiksaanwijzing
- 3. Beschrijving van het apparaat
- 4. Hoe de robotmaaier werkt
- 5. Veiligheidsvoorzieningen
- 6. Voor uw veiligheid
- 7. Toelichting van de symbolen
- 8. Leveringsomvang
- 9. Eerste installatie
- 9.1 Aanwijzingen voor het dockingstation
- 9.2 Aansluitingen van het dockingstation
- 9.3 Voedingskabel op het dockingstation aansluiten
- 9.4 Installatiemateriaal
- 9.5 Snijhoogte instellen
- 9.6 Aanwijzingen voor de eerste installatie
- 9.7 Taal, datum, tijd instellen
- 9.8 Dockingstation installeren
- 9.9 Begrenzingsdraad leggen
- 9.10 Begrenzingsdraad aansluiten
- 9.11 Robotmaaier en dockingstation koppelen
- 9.12 Installatie testen
- 9.13 Robotmaaier programmeren
- 9.14 Eerste installatie afsluiten
- 9.15 Eerste maaibeurt na de eerste installatie
- 10. iMOW® app
- 11. Menu
- 11.1 Bedieningsaanwijzingen
- 11.2 Statusmelding
- 11.3 Infogedeelte
- 11.4 Hoofdmenu
- 11.5 Start
- 11.6 Naar docking
- 11.7 Maaischema
- 11.8 Mehr
- 11.9 Instellingen
- 11.10 iMOW® – apparaatinstellingen
- 11.11 Regensensor instellen
- 11.12 Statusmelding instellen
- 11.13 Installatie
- 11.14 Startpunten instellen
- 11.15 Veiligheid
- 11.16 Service
- 11.17 Informatie
- 12. Begrenzingsdraad
- 12.1 Ligging van de begrenzingsdraad plannen
- 12.2 Schets van het maaivlak maken
- 12.3 Begrenzingsdraad leggen
- 12.4 Begrenzingsdraad aansluiten
- 12.5 Draadafstanden – iMOW® Ruler gebruiken
- 12.6 Scherpe hoeken
- 12.7 Vernauwingen
- 12.8 Verbindingstrajecten installeren
- 12.9 Verboden zones
- 12.10 Aanpalende gazons
- 12.11 Doorgangen
- 12.12 Zoeklussen voor de verplaatste rit naar het begin
- 12.13 Precies langs randen maaien
- 12.14 Afhellend terrein langs de begrenzingsdraad
- 12.15 Draadreserve installeren
- 12.16 Draadverbinders gebruiken
- 12.17 Smalle afstanden tot rand
- 13. Dockingstation
- 14. Tips voor het maaien
- 15. Apparaat in gebruik nemen
- 16. Onderhoud
- 17. Standaard reserveonderdelen
- 18. Accessoires
- 19. Slijtage minimaliseren en schade voorkomen
- 20. Milieubescherming
- 21. Transport
- 22. EU- conformiteitsverklaring
- 23. Technische gegevens
- 24. Meldingen
- 25. Defectopsporing
- 26. Onderhoudsschema
- 27. Installatievoorbeelden
- 1. Indice
- 2. Avvertenze sulle istruzioni per l’uso
- 3. Descrizione dell’apparecchio
- 4. Come funziona il robot tosaerba
- 5. Dispositivi per la sicurezza
- 6. Per la vostra sicurezza
- 6.1 Informazioni generali
- 6.2 Abbigliamento ed equipaggiamento
- 6.3 Attenzione – Pericoli causati da corrente elettrica
- 6.4 Accumulatore
- 6.5 Trasporto dell'apparecchio
- 6.6 Prima della messa in funzione
- 6.7 Programmazione
- 6.8 Durante il funzionamento
- 6.9 Manutenzione e riparazioni
- 6.10 Rimessaggio durante periodi di non utilizzo prolungati
- 6.11 Smaltimento
- 7. Descrizione dei simboli
- 8. Equipaggiamento fornito
- 9. Installazione iniziale
- 9.1 Indicazioni sulla docking station
- 9.2 Collegamenti della docking station
- 9.3 Collegamento del cavo di alimentazione alla docking station
- 9.4 Materiale d'installazione
- 9.5 Regolazione dell'altezza di taglio
- 9.6 Indicazioni relative all'installazione iniziale
- 9.7 Impostazione di lingua, data, ora
- 9.8 Installazione della docking station
- 9.9 Disposizione del filo perimetrale
- 9.10 Collegamento del filo perimetrale
- 9.11 Collegamento del robot tosaerba alla docking station
- 9.12 Controllo dell'installazione
- 9.13 Programmazione del robot tosaerba
- 9.14 Completamento dell'installazione iniziale
- 9.15 Prima azione di taglio dopo il completamento dell'installazione iniziale
- 10. App iMOW®
- 11. Menu
- 11.1 Indicazioni sui comandi
- 11.2 Indicatore Stato
- 11.3 Sezione informazioni
- 11.4 Menu principale
- 11.5 Avvio
- 11.6 Torna in base
- 11.7 Schema taglio
- 11.8 Altro
- 11.9 Impostazioni
- 11.10 iMOW® – Impostazioni dell'apparecchio
- 11.11 Regolazione sensore pioggia
- 11.12 Impostazione dell'indicatore stato
- 11.13 Installazione
- 11.14 Impostazione dei punti di partenza
- 11.15 Sicurezza
- 11.16 Servizio
- 11.17 Informazioni
- 12. Filo perimetrale
- 12.1 Pianificazione della disposizione del filo perimetrale
- 12.2 Esecuzione schizzo dell'area di taglio
- 12.3 Disposizione del filo perimetrale
- 12.4 Collegare il filo perimetrale
- 12.5 Distanze filo – Utilizzo della dima distanziatrice iMOW®
- 12.6 Angoli acuti
- 12.7 Strettoie
- 12.8 Installazione dei tratti di collegamento
- 12.9 Superfici di sbarramento
- 12.10 Superfici secondarie
- 12.11 Passaggi
- 12.12 Circuiti guida per il ritorno in base sfalsato
- 12.13 Taglio perfetto lungo i bordi
- 12.14 Terreni pendenti lungo il filo perimetrale
- 12.15 Installazione delle riserve di filo
- 12.16 Utilizzo delle connessioni filo
- 12.17 Distanze dal bordo strette
- 13. Docking station
- 14. Indicazioni per il taglio dell'erba
- 15. Messa in servizio dell'apparecchio
- 16. Manutenzione
- 16.1 Piano di manutenzione
- 16.2 Pulizia dell'apparecchio
- 16.3 Controllo dei limiti d'usura della lama
- 16.4 Smontaggio e montaggio della lama
- 16.5 Affilatura della lama
- 16.6 Smontaggio e montaggio del disco trascinatore
- 16.7 Ricerca della rottura filo
- 16.8 Rimessaggio e pausa invernale
- 16.9 Smontaggio della docking station
- 17. Ricambi standard
- 18. Accessori
- 19. Minimizzare l’usura ed evitare danni
- 20. Tutela dell’ambiente
- 21. Trasporto
- 22. Dichiarazione di conformità EU
- 23. Dati tecnici
- 24. Messaggi
- 25. Risoluzione guasti
- 26. Programma Assistenza Tecnica
- 27. Esempi di installazione
0478 131 9954 C - EN
108
– A person who performs work on the
robotic mower.
– A person who activates or operates the
machine.
– A person who installs or removes the
perimeter wire or docking station.
The use of the iMOW® app also falls
under the term "use" for the purpose of this
instruction manual.
The machine must only be operated by
persons who are well rested and in good
physical and mental condition. If your
health is impaired, you should consult your
doctor to determine whether working with
the machine is possible. The machine
should not be operated after the
consumption of alcohol, drugs or
medications which impair reactions.
Make sure that you are familiar with the
controls and use of the machine.
The machine must only be used by
persons who have read the instruction
manual and are familiar with operation of
the machine. The user should seek expert
and practical instruction prior to initial
operation. The user must receive
instruction on safe use of the machine
from the vendor or another expert.
During this instruction, the user should be
made aware that the utmost care and
concentration are required for working with
the machine.
Residual risks persist even if you operate
this machine according to the instructions.
Only give or lend the machine to persons
who are familiar with this model and how to
operate it. The instruction manual forms
part of the machine and must always be
provided to persons operating it.
Make sure that the user is physically,
sensorily and mentally capable of
operating the machine and working with it.
If the user is physically, sensorily or
mentally impaired, the machine must only
be used under supervision or following
instruction by a responsible person.
Make sure that the user is of legal age or
being trained under supervision in a
profession in accordance with national
regulations.
Children must be kept away
from the machine and
mowing area during mowing
operation.
Dogs and other pets must be
kept away from the machine
and mowing area during
mowing operation.
For safety reasons, any
modification to the machine, except the
proper installation of accessories or
attachments approved by STIHL, is
forbidden and results in voiding of the
warranty cover. Information regarding
approved accessories and attachments
can be obtained from your STIHL
specialist dealer.
In particular, any tampering with the
machine which increases the power output
or speed of the motors is forbidden.
It is not permissible to make any
modifications to the machine that could
lead to increased noise emissions.
For safety reasons, the machine software
must never be modified or tampered with.
Particular care is required during use in
public green spaces, parks, sports fields,
along roads and in agricultural and forestry
businesses.
It is not permitted to transport objects,
animals or persons, particularly children,
on the machine.
Never allow persons, particularly children,
to ride or sit on the robotic mower.
Caution – risk of accident:
The robotic mower is intended for
automatic lawn care and for manual lawn
mowing. Its use for other purposes is not
permitted and may be dangerous or result
in damage to the machine.
Due to the physical danger to the user, the
machine must not be used for the following
applications (incomplete list):
– for trimming bushes, hedges and
shrubs,
– for cutting creepers,
– for the care of lawn roofs and balcony
boxes,
– for shredding or chipping tree or hedge
cuttings,
– for clearing paths (vacuuming,
blowing),
– for levelling earth mounds, e.g. mole
hills.
Risk of death from suffocation!
Packaging material is not a toy -
danger of suffocation! Keep
packaging material away from
children.
Caution - risk of accident!