User Instructions
Table Of Contents
- 1. Inhaltsverzeichnis
- 2. Zu dieser Gebrauchsanleitung
- 3. Gerätebeschreibung
- 4. Wie der Robotermäher arbeitet
- 5. Sicherheitseinrichtungen
- 6. Zu Ihrer Sicherheit
- 7. Symbolbeschreibung
- 8. Lieferumfang
- 9. Erstinstallation
- 9.1 Hinweise zur Dockingstation
- 9.2 Anschlüsse der Dockingstation
- 9.3 Netzleitung an der Dockingstation anschließen
- 9.4 Installationsmaterial
- 9.5 Akku einbauen
- 9.6 Schnitthöhe einstellen
- 9.7 Hinweise zur ersten Installation
- 9.8 Sprache, Datum, Uhrzeit einstellen
- 9.9 Dockingstation installieren
- 9.10 Begrenzungsdraht verlegen
- 9.11 Begrenzungsdraht anschließen
- 9.12 Robotermäher und Dockingstation koppeln
- 9.13 Installation prüfen
- 9.14 Robotermäher programmieren
- 9.15 Erstinstallation abschließen
- 9.16 Erster Mähvorgang nach der Erstinstallation
- 10. iMow App
- 11. Menü
- 11.1 Bedienhinweise
- 11.2 Statusanzeige
- 11.3 Infobereich
- 11.4 Hauptmenü
- 11.5 Befehle
- 11.6 Mähplan
- 11.7 Aktivzeiten
- 11.8 Mähdauer
- 11.9 Information
- 11.10 Einstellungen
- 11.11 iMow – Geräteeinstellungen
- 11.12 Regensensor einstellen
- 11.13 Statusanzeige einstellen
- 11.14 Installation
- 11.15 Startpunkte einstellen
- 11.16 Sicherheit
- 11.17 Service
- 12. Begrenzungsdraht
- 12.1 Verlegung des Begrenzungsdrahts planen
- 12.2 Skizze der Mähfläche anfertigen
- 12.3 Begrenzungsdraht verlegen
- 12.4 Begrenzungsdraht anschließen
- 12.5 Drahtabstände – iMow Ruler verwenden
- 12.6 Spitze Ecken
- 12.7 Engstellen
- 12.8 Verbindungsstrecken installieren
- 12.9 Sperrflächen
- 12.10 Nebenflächen
- 12.11 Gassen
- 12.12 Suchschleifen für das versetzte Heimfahren
- 12.13 Kantenexaktes Mähen
- 12.14 Abfallendes Gelände in der Mähfläche
- 12.15 Drahtreserven installieren
- 12.16 Drahtverbinder verwenden
- 12.17 Enge Randabstände
- 13. Dockingstation
- 14. Hinweise zum Mähen
- 15. Gerät in Betrieb nehmen
- 16. Wartung
- 17. Übliche Ersatzteile
- 18. Zubehör
- 19. Verschleiß minimieren und Schäden vermeiden
- 20. Umweltschutz
- 21. Transport
- 22. EU- Konformitätserklärung
- 23. Technische Daten
- 24. Meldungen
- 25. Fehlersuche
- 26. Serviceplan
- 27. Installationsbeispiele
- 1. Table of contents
- 2. Notes on the instruction manual
- 3. Machine overview
- 4. How the robotic mower works
- 5. Safety devices
- 6. For your safety
- 7. Description of symbols
- 8. Standard equipment
- 9. Initial installation
- 9.1 Notes on the docking station
- 9.2 Docking station connections
- 9.3 Connecting the power cable to the docking station
- 9.4 Installation material
- 9.5 Installing the battery
- 9.6 Adjusting the cutting height
- 9.7 Notes on initial installation
- 9.8 Setting the language, date and time
- 9.9 Installing the docking station
- 9.10 Routing the perimeter wire
- 9.11 Connecting the perimeter wire
- 9.12 Linking the robotic mower and docking station
- 9.13 Check installation
- 9.14 Programming the robotic mower
- 9.15 Completing initial installation
- 9.16 First mowing operation after initial installation
- 10. iMow app
- 11. Menu
- 11.1 Operating instructions
- 11.2 Status screen
- 11.3 Information area
- 11.4 Main menu
- 11.5 Commands
- 11.6 Mowing plan
- 11.7 Active times
- 11.8 Mowing duration
- 11.9 Information
- 11.10 Settings
- 11.11 iMow – machine settings
- 11.12 Setting the rain sensor
- 11.13 Setting the status screen
- 11.14 Installation
- 11.15 Setting starting points
- 11.16 Safety
- 11.17 Service
- 12. Perimeter wire
- 12.1 Planning routing of the perimeter wire
- 12.2 Making a sketch of the mowing area
- 12.3 Routing the perimeter wire
- 12.4 Connecting the perimeter wire
- 12.5 Wire clearances – use iMow Ruler
- 12.6 Acute corners
- 12.7 Confined areas
- 12.8 Installing linking sections
- 12.9 No-go areas
- 12.10 Secondary areas
- 12.11 Corridors
- 12.12 Guide loops for offset drive home
- 12.13 Accurate mowing along edges
- 12.14 Sloping terrain in the mowing area
- 12.15 Installing reserve wire
- 12.16 Using wire connectors
- 12.17 Narrow edge clearances
- 13. Docking station
- 14. Notes on mowing
- 15. Operating the machine
- 16. Maintenance
- 16.1 Maintenance schedule
- 16.2 Cleaning the machine
- 16.3 Checking the mowing blade wear limits
- 16.4 Removing and installing the mowing blade
- 16.5 Sharpening the mowing blade
- 16.6 Removing and installing the carrier plate
- 16.7 Finding a wire break
- 16.8 Storage and winter break
- 16.9 Removing the docking station
- 17. Standard spare parts
- 18. Accessories
- 19. Minimising wear and preventing damage
- 20. Environmental protection
- 21. Transport
- 22. EU - Declaration of conformity
- 23. Technical specifications
- 24. Messages
- 25. Troubleshooting
- 26. Service schedule
- 27. Installation examples
- 1. Sommaire
- 2. À propos de ce manuel d’utilisation
- 3. Description de l’appareil
- 4. Mode de fonctionnement du robot de tonte
- 5. Dispositifs de sécurité
- 6. Consignes de sécurité
- 6.1 Généralités
- 6.2 Vêtements et équipement appropriés
- 6.3 Avertissement – dangers liés au courant électrique
- 6.4 Batterie
- 6.5 Transport de l’appareil
- 6.6 Avant la mise en service
- 6.7 Programmation
- 6.8 Pendant le fonctionnement de l’appareil
- 6.9 Entretien et réparations
- 6.10 Stockage prolongé
- 6.11 Mise au rebut
- 7. Signification des pictogrammes
- 8. Contenu de l’emballage
- 9. Première installation
- 9.1 Remarques concernant la station de base
- 9.2 Branchements de la station de base
- 9.3 Branchement du cordon d’alimentation secteur sur la station de base
- 9.4 Matériel d’installation
- 9.5 Montage de la batterie
- 9.6 Réglage de la hauteur de coupe
- 9.7 Consignes pour la première installation
- 9.8 Réglage de la langue, de la date et de l’heure
- 9.9 Installation de la station de base
- 9.10 Pose du fil de délimitation
- 9.11 Raccordement du fil de délimitation
- 9.12 Connexion du robot de tonte et de la station de base
- 9.13 Contrôle de l’installation
- 9.14 Programmation du robot de tonte
- 9.15 Fin de la première installation
- 9.16 Première tonte après la première installation
- 10. Application iMow
- 11. Menu
- 11.1 Remarques relatives à l’utilisation
- 11.2 Écran statut
- 11.3 Zone d’info
- 11.4 Menu principal
- 11.5 Commandes
- 11.6 Plan de tonte
- 11.7 Temps actifs
- 11.8 Durée de tonte
- 11.9 Informations
- 11.10 Réglages
- 11.11 iMow – Réglages de l’appareil
- 11.12 Réglage du capteur de pluie
- 11.13 Réglage de l’écran statut
- 11.14 Installation
- 11.15 Réglage des points de départ
- 11.16 Sécurité
- 11.17 Service
- 12. Fil de délimitation
- 12.1 Planification de la pose du fil de délimitation
- 12.2 Réalisation du croquis de la zone de tonte
- 12.3 Pose du fil de délimitation
- 12.4 Raccordement du fil de délimitation
- 12.5 Distances du fil – Utilisation de l’iMow Ruler
- 12.6 Coins pointus
- 12.7 Points d'étranglement
- 12.8 Installation de sections de liaison
- 12.9 Îlots de blocage
- 12.10 Zones annexes
- 12.11 Couloirs
- 12.12 Boucles de recherche pour le trajet retour décalé
- 12.13 Tonte précise des bords
- 12.14 Terrain en pente dans la zone de tonte
- 12.15 Installation de réserves de fil
- 12.16 Utilisation des connecteurs de fil
- 12.17 Distances étroites en bordure
- 13. Station de base
- 14. Conseils pour la tonte
- 15. Mise en service de l’appareil
- 16. Entretien
- 16.1 Plan d’entretien
- 16.2 Nettoyage de l’appareil
- 16.3 Contrôle des limites d’usure de la lame de coupe
- 16.4 Dépose et repose de la lame de coupe
- 16.5 Affûtage de la lame de coupe
- 16.6 Dépose et repose du disque d’entraînement
- 16.7 Chercher rupture fil
- 16.8 Rangement de l’appareil et hivernage
- 16.9 Démontage de la station de base
- 17. Pièces de rechange courantes
- 18. Accessoires
- 19. Comment limiter l’usure et éviter les dommages
- 20. Protection de l’environnement
- 21. Transport
- 22. Déclaration de conformité UE
- 23. Caractéristiques techniques
- 24. Messages
- 25. Recherche des pannes
- 26. Feuille d’entretien
- 27. Exemples d’installation
- 1. Inhoudsopgave
- 2. Over deze gebruiksaanwijzing
- 3. Beschrijving van het apparaat
- 4. Hoe de robotmaaier werkt
- 5. Veiligheidsvoorzieningen
- 6. Voor uw veiligheid
- 7. Toelichting van de symbolen
- 8. Leveringsomvang
- 9. Eerste installatie
- 9.1 Aanwijzingen voor het dockingstation
- 9.2 Aansluitingen van het dockingstation
- 9.3 Voedingskabel op het dockingstation aansluiten
- 9.4 Installatiemateriaal
- 9.5 Accu inbouwen
- 9.6 Snijhoogte instellen
- 9.7 Aanwijzingen voor de eerste installatie
- 9.8 Taal, datum, tijd instellen
- 9.9 Dockingstation installeren
- 9.10 Begrenzingsdraad leggen
- 9.11 Begrenzingsdraad aansluiten
- 9.12 Robotmaaier en dockingstation koppelen
- 9.13 Installatie testen
- 9.14 Robotmaaier programmeren
- 9.15 Eerste installatie afsluiten
- 9.16 Eerste maaibeurt na de eerste installatie
- 10. iMow app
- 11. Menu
- 11.1 Bedieningsaanwijzingen
- 11.2 Statusmelding
- 11.3 Infogedeelte
- 11.4 Hoofdmenu
- 11.5 Commando’s
- 11.6 Maaischema
- 11.7 Actieve tijden
- 11.8 Maaiduur
- 11.9 Informatie
- 11.10 Instellingen
- 11.11 iMow – apparaatinstellingen
- 11.12 Regensensor instellen
- 11.13 Statusmelding instellen
- 11.14 Installatie
- 11.15 Startpunten instellen
- 11.16 Veiligheid
- 11.17 Service
- 12. Begrenzingsdraad
- 12.1 Ligging van de begrenzingsdraad plannen
- 12.2 Schets van het maaivlak maken
- 12.3 Begrenzingsdraad leggen
- 12.4 Begrenzingsdraad aansluiten
- 12.5 Draadafstanden – iMow Ruler gebruiken
- 12.6 Scherpe hoeken
- 12.7 Vernauwingen
- 12.8 Verbindingstrajecten installeren
- 12.9 Verboden zones
- 12.10 Aanpalende gazons
- 12.11 Doorgangen
- 12.12 Zoeklussen voor de verplaatste rit naar het begin
- 12.13 Precies langs randen maaien
- 12.14 Afhellend terrein in het maaivlak
- 12.15 Draadreserve installeren
- 12.16 Draadverbinders gebruiken
- 12.17 Smalle afstanden tot rand
- 13. Dockingstation
- 14. Tips voor het maaien
- 15. Apparaat in gebruik nemen
- 16. Onderhoud
- 17. Standaard reserveonderdelen
- 18. Accessoires
- 19. Slijtage minimaliseren en schade voorkomen
- 20. Milieubescherming
- 21. Transport
- 22. EU- conformiteitsverklaring
- 23. Technische gegevens
- 24. Meldingen
- 25. Defectopsporing
- 26. Onderhoudsschema
- 27. Installatievoorbeelden
- 1. Indice
- 2. Avvertenze sulle istruzioni per l’uso
- 3. Descrizione dell’apparecchio
- 4. Come funziona il robot tosaerba
- 5. Dispositivi per la sicurezza
- 6. Per la vostra sicurezza
- 6.1 Informazioni generali
- 6.2 Abbigliamento ed equipaggiamento
- 6.3 Attenzione – Pericoli causati da corrente elettrica
- 6.4 Accumulatore
- 6.5 Trasporto dell'apparecchio
- 6.6 Prima della messa in funzione
- 6.7 Programmazione
- 6.8 Durante il funzionamento
- 6.9 Manutenzione e riparazioni
- 6.10 Rimessaggio durante periodi di non utilizzo prolungati
- 6.11 Smaltimento
- 7. Descrizione dei simboli
- 8. Equipaggiamento fornito
- 9. Installazione iniziale
- 9.1 Indicazioni sulla docking station
- 9.2 Collegamenti della docking station
- 9.3 Collegamento del cavo di alimentazione alla docking station
- 9.4 Materiale d'installazione
- 9.5 Montaggio accumulatore
- 9.6 Regolazione dell'altezza di taglio
- 9.7 Indicazioni relative all'installazione iniziale
- 9.8 Impostazione lingua, data, ora
- 9.9 Installazione della docking station
- 9.10 Disposizione del filo perimetrale
- 9.11 Collegamento del filo perimetrale
- 9.12 Collegamento del robot tosaerba alla docking station
- 9.13 Controllo dell'installazione
- 9.14 Programmazione del robot tosaerba
- 9.15 Completamento dell'installazione iniziale
- 9.16 Prima azione di taglio dopo il completamento dell'installazione iniziale
- 10. App iMow
- 11. Menu
- 11.1 Indicazioni sui comandi
- 11.2 Indicatore di stato
- 11.3 Sezione informazioni
- 11.4 Menu principale
- 11.5 Preferiti
- 11.6 Schema taglio
- 11.7 Orari attivi
- 11.8 Durata taglio
- 11.9 Informazioni
- 11.10 Impostazioni
- 11.11 iMow – Impostazioni attrezzo
- 11.12 Regolazione sensore pioggia
- 11.13 Impostazione dell'indicatore Stato
- 11.14 Installazione
- 11.15 Impostazione dei punti di partenza
- 11.16 Sicurezza
- 11.17 Servizio
- 12. Filo perimetrale
- 12.1 Pianificazione della disposizione del filo perimetrale
- 12.2 Esecuzione schizzo dell'area di taglio
- 12.3 Disposizione del filo perimetrale
- 12.4 Collegare il filo perimetrale
- 12.5 Distanze filo – Utilizzo della dima distanziatrice iMow
- 12.6 Angoli acuti
- 12.7 Strettoie
- 12.8 Installazione dei tratti di collegamento
- 12.9 Superfici di sbarramento
- 12.10 Superfici secondarie
- 12.11 Passaggi
- 12.12 Circuiti guida per il ritorno in base sfalsato
- 12.13 Taglio perfetto lungo i bordi
- 12.14 Terreni pendenti nell'area di taglio
- 12.15 Installazione delle riserve di filo
- 12.16 Utilizzo delle connessioni filo
- 12.17 Distanze dal bordo strette
- 13. Docking station
- 14. Indicazioni per il taglio dell'erba
- 15. Messa in servizio dell'apparecchio
- 16. Manutenzione
- 17. Ricambi standard
- 18. Accessori
- 19. Minimizzare l’usura ed evitare danni
- 20. Tutela dell’ambiente
- 21. Trasporto
- 22. Dichiarazione di conformità EU
- 23. Dati tecnici
- 24. Messaggi
- 25. Risoluzione guasti
- 26. Programma Assistenza Tecnica
- 27. Esempi di installazione
371
DEENFRNL IT
0478 131 9942 C - IT
● Sbloccare il robot tosaerba
usando la combinazione tasti
visualizzata. A tale scopo è
necessario premere il tasto
Taglio e il tasto OK nella sequenza
riportata in figura.
5.3 Coperture di protezione
Il robot tosaerba è dotato di coperture di
protezione che evitano un contatto
accidentale con la lama e con l'erba
tagliata.
Tra tali coperture vi è anche la calotta.
5.4 Comando a due mani
La lama può essere innestata
durante il taglio dell'erba manuale
solo azionando il tasto OK con il
pollice destro e tenendolo premuto e
successivamente premendo il tasto
Taglio con il pollice sinistro. Una volta
attivato, deve rimanere premuto solo il
tasto Taglio per continuare a tagliare
l'erba.
5.5 Sensore antiurto
Il robot tosaerba è dotato di una calotta
mobile che funge da sensore antiurto. Il
robot tosaerba si arresta immediatamente,
se nella modalità automatica urta contro
un ostacolo fisso, avente una certa altezza
minima (10 cm) e saldamente piantato nel
terreno. Successivamente, il robot
tosaerba modifica la direzione di marcia e
continua l'azione di taglio. Se il sensore
antiurto si attiva troppo spesso, la lama si
arresta.
5.6 Protezione da sollevamento
Se il robot tosaerba venisse sollevato dalla
calotta oppure dall'impugnatura per il
trasporto, interrompe immediatamente
l'azione di taglio. La lama si arresta
nell'arco di pochi secondi.
5.7 Sensore inclinazione
Se durante il funzionamento venisse
superata l'inclinazione pendio consentita,
il robot tosaerba modifica immediatamente
la direzione di marcia. In caso di
rovesciamento dell'apparecchio la
trazione e il motore taglio vengono
disinseriti.
5.8 Illuminazione display
Durante il funzionamento si attiva
l'illuminazione display. Grazie a tale luce è
possibile distinguere chiaramente il robot
tosaerba anche nell'oscurità.
5.9 Sistema antifurto
Con il sistema antifurto attivato, se non
viene inserito il codice PIN entro un
minuto, dopo il sollevamento del robot
tosaerba scatta un segnale acustico di
allarme. (Ö 11.16)
Il robot tosaerba può essere azionato
esclusivamente con la docking station in
dotazione. In caso di utilizzo di un'altra
docking station, questa deve essere
abbinata al robot tosaerba. (Ö 11.16)
5.10 Protezione GPS
I modelli RMI 632 C, RMI 632 PC sono
dotati di ricevitore GPS. Con la protezione
GPS attivata, il proprietario
dell'apparecchio viene avvertito se
l'apparecchio viene messo in funzione al di
fuori dell'area di ritorno in base. Il display
richiede inoltre l'inserimento del codice
PIN. (Ö 14.5)
L'urto contro un ostacolo avviene
con una certa forza. Ostacoli
delicati oppure oggetti leggeri, quali
fioriere di dimensioni più piccole
possono pertanto essere ribaltati o
danneggiati.
STIHL consiglia di rimuovere gli
ostacoli oppure di escluderli con
delle superfici di sbarramento.
(Ö 12.9)
STIHL consiglia di impostare uno
dei livelli di sicurezza "Basso",
"Medio" oppure "Alto". In questo
modo si garantisce che il robot
tosaerba non venga messo in
funzione da persone non
autorizzate con altre docking
station oppure che non vengano
modificate le impostazioni o la
programmazione.
Suggerimento:
Attivare sempre la protezione GPS.
(Ö 11.16)