User Instructions
Table Of Contents
- 1. Inhaltsverzeichnis
- 2. Zu dieser Gebrauchsanleitung
- 3. Gerätebeschreibung
- 4. Wie der Robotermäher arbeitet
- 5. Sicherheitseinrichtungen
- 6. Zu Ihrer Sicherheit
- 7. Symbolbeschreibung
- 8. Lieferumfang
- 9. Erstinstallation
- 9.1 Hinweise zur Dockingstation
- 9.2 Anschlüsse der Dockingstation
- 9.3 Netzleitung an der Dockingstation anschließen
- 9.4 Installationsmaterial
- 9.5 Akku einbauen
- 9.6 Schnitthöhe einstellen
- 9.7 Hinweise zur ersten Installation
- 9.8 Sprache, Datum, Uhrzeit einstellen
- 9.9 Dockingstation installieren
- 9.10 Begrenzungsdraht verlegen
- 9.11 Begrenzungsdraht anschließen
- 9.12 Robotermäher und Dockingstation koppeln
- 9.13 Installation prüfen
- 9.14 Robotermäher programmieren
- 9.15 Erstinstallation abschließen
- 9.16 Erster Mähvorgang nach der Erstinstallation
- 10. iMow App
- 11. Menü
- 11.1 Bedienhinweise
- 11.2 Statusanzeige
- 11.3 Infobereich
- 11.4 Hauptmenü
- 11.5 Befehle
- 11.6 Mähplan
- 11.7 Aktivzeiten
- 11.8 Mähdauer
- 11.9 Information
- 11.10 Einstellungen
- 11.11 iMow – Geräteeinstellungen
- 11.12 Regensensor einstellen
- 11.13 Statusanzeige einstellen
- 11.14 Installation
- 11.15 Startpunkte einstellen
- 11.16 Sicherheit
- 11.17 Service
- 12. Begrenzungsdraht
- 12.1 Verlegung des Begrenzungsdrahts planen
- 12.2 Skizze der Mähfläche anfertigen
- 12.3 Begrenzungsdraht verlegen
- 12.4 Begrenzungsdraht anschließen
- 12.5 Drahtabstände – iMow Ruler verwenden
- 12.6 Spitze Ecken
- 12.7 Engstellen
- 12.8 Verbindungsstrecken installieren
- 12.9 Sperrflächen
- 12.10 Nebenflächen
- 12.11 Gassen
- 12.12 Suchschleifen für das versetzte Heimfahren
- 12.13 Kantenexaktes Mähen
- 12.14 Abfallendes Gelände in der Mähfläche
- 12.15 Drahtreserven installieren
- 12.16 Drahtverbinder verwenden
- 12.17 Enge Randabstände
- 13. Dockingstation
- 14. Hinweise zum Mähen
- 15. Gerät in Betrieb nehmen
- 16. Wartung
- 17. Übliche Ersatzteile
- 18. Zubehör
- 19. Verschleiß minimieren und Schäden vermeiden
- 20. Umweltschutz
- 21. Transport
- 22. EU- Konformitätserklärung
- 23. Technische Daten
- 24. Meldungen
- 25. Fehlersuche
- 26. Serviceplan
- 27. Installationsbeispiele
- 1. Table of contents
- 2. Notes on the instruction manual
- 3. Machine overview
- 4. How the robotic mower works
- 5. Safety devices
- 6. For your safety
- 7. Description of symbols
- 8. Standard equipment
- 9. Initial installation
- 9.1 Notes on the docking station
- 9.2 Docking station connections
- 9.3 Connecting the power cable to the docking station
- 9.4 Installation material
- 9.5 Installing the battery
- 9.6 Adjusting the cutting height
- 9.7 Notes on initial installation
- 9.8 Setting the language, date and time
- 9.9 Installing the docking station
- 9.10 Routing the perimeter wire
- 9.11 Connecting the perimeter wire
- 9.12 Linking the robotic mower and docking station
- 9.13 Check installation
- 9.14 Programming the robotic mower
- 9.15 Completing initial installation
- 9.16 First mowing operation after initial installation
- 10. iMow app
- 11. Menu
- 11.1 Operating instructions
- 11.2 Status screen
- 11.3 Information area
- 11.4 Main menu
- 11.5 Commands
- 11.6 Mowing plan
- 11.7 Active times
- 11.8 Mowing duration
- 11.9 Information
- 11.10 Settings
- 11.11 iMow – machine settings
- 11.12 Setting the rain sensor
- 11.13 Setting the status screen
- 11.14 Installation
- 11.15 Setting starting points
- 11.16 Safety
- 11.17 Service
- 12. Perimeter wire
- 12.1 Planning routing of the perimeter wire
- 12.2 Making a sketch of the mowing area
- 12.3 Routing the perimeter wire
- 12.4 Connecting the perimeter wire
- 12.5 Wire clearances – use iMow Ruler
- 12.6 Acute corners
- 12.7 Confined areas
- 12.8 Installing linking sections
- 12.9 No-go areas
- 12.10 Secondary areas
- 12.11 Corridors
- 12.12 Guide loops for offset drive home
- 12.13 Accurate mowing along edges
- 12.14 Sloping terrain in the mowing area
- 12.15 Installing reserve wire
- 12.16 Using wire connectors
- 12.17 Narrow edge clearances
- 13. Docking station
- 14. Notes on mowing
- 15. Operating the machine
- 16. Maintenance
- 16.1 Maintenance schedule
- 16.2 Cleaning the machine
- 16.3 Checking the mowing blade wear limits
- 16.4 Removing and installing the mowing blade
- 16.5 Sharpening the mowing blade
- 16.6 Removing and installing the carrier plate
- 16.7 Finding a wire break
- 16.8 Storage and winter break
- 16.9 Removing the docking station
- 17. Standard spare parts
- 18. Accessories
- 19. Minimising wear and preventing damage
- 20. Environmental protection
- 21. Transport
- 22. EU - Declaration of conformity
- 23. Technical specifications
- 24. Messages
- 25. Troubleshooting
- 26. Service schedule
- 27. Installation examples
- 1. Sommaire
- 2. À propos de ce manuel d’utilisation
- 3. Description de l’appareil
- 4. Mode de fonctionnement du robot de tonte
- 5. Dispositifs de sécurité
- 6. Consignes de sécurité
- 6.1 Généralités
- 6.2 Vêtements et équipement appropriés
- 6.3 Avertissement – dangers liés au courant électrique
- 6.4 Batterie
- 6.5 Transport de l’appareil
- 6.6 Avant la mise en service
- 6.7 Programmation
- 6.8 Pendant le fonctionnement de l’appareil
- 6.9 Entretien et réparations
- 6.10 Stockage prolongé
- 6.11 Mise au rebut
- 7. Signification des pictogrammes
- 8. Contenu de l’emballage
- 9. Première installation
- 9.1 Remarques concernant la station de base
- 9.2 Branchements de la station de base
- 9.3 Branchement du cordon d’alimentation secteur sur la station de base
- 9.4 Matériel d’installation
- 9.5 Montage de la batterie
- 9.6 Réglage de la hauteur de coupe
- 9.7 Consignes pour la première installation
- 9.8 Réglage de la langue, de la date et de l’heure
- 9.9 Installation de la station de base
- 9.10 Pose du fil de délimitation
- 9.11 Raccordement du fil de délimitation
- 9.12 Connexion du robot de tonte et de la station de base
- 9.13 Contrôle de l’installation
- 9.14 Programmation du robot de tonte
- 9.15 Fin de la première installation
- 9.16 Première tonte après la première installation
- 10. Application iMow
- 11. Menu
- 11.1 Remarques relatives à l’utilisation
- 11.2 Écran statut
- 11.3 Zone d’info
- 11.4 Menu principal
- 11.5 Commandes
- 11.6 Plan de tonte
- 11.7 Temps actifs
- 11.8 Durée de tonte
- 11.9 Informations
- 11.10 Réglages
- 11.11 iMow – Réglages de l’appareil
- 11.12 Réglage du capteur de pluie
- 11.13 Réglage de l’écran statut
- 11.14 Installation
- 11.15 Réglage des points de départ
- 11.16 Sécurité
- 11.17 Service
- 12. Fil de délimitation
- 12.1 Planification de la pose du fil de délimitation
- 12.2 Réalisation du croquis de la zone de tonte
- 12.3 Pose du fil de délimitation
- 12.4 Raccordement du fil de délimitation
- 12.5 Distances du fil – Utilisation de l’iMow Ruler
- 12.6 Coins pointus
- 12.7 Points d'étranglement
- 12.8 Installation de sections de liaison
- 12.9 Îlots de blocage
- 12.10 Zones annexes
- 12.11 Couloirs
- 12.12 Boucles de recherche pour le trajet retour décalé
- 12.13 Tonte précise des bords
- 12.14 Terrain en pente dans la zone de tonte
- 12.15 Installation de réserves de fil
- 12.16 Utilisation des connecteurs de fil
- 12.17 Distances étroites en bordure
- 13. Station de base
- 14. Conseils pour la tonte
- 15. Mise en service de l’appareil
- 16. Entretien
- 16.1 Plan d’entretien
- 16.2 Nettoyage de l’appareil
- 16.3 Contrôle des limites d’usure de la lame de coupe
- 16.4 Dépose et repose de la lame de coupe
- 16.5 Affûtage de la lame de coupe
- 16.6 Dépose et repose du disque d’entraînement
- 16.7 Chercher rupture fil
- 16.8 Rangement de l’appareil et hivernage
- 16.9 Démontage de la station de base
- 17. Pièces de rechange courantes
- 18. Accessoires
- 19. Comment limiter l’usure et éviter les dommages
- 20. Protection de l’environnement
- 21. Transport
- 22. Déclaration de conformité UE
- 23. Caractéristiques techniques
- 24. Messages
- 25. Recherche des pannes
- 26. Feuille d’entretien
- 27. Exemples d’installation
- 1. Inhoudsopgave
- 2. Over deze gebruiksaanwijzing
- 3. Beschrijving van het apparaat
- 4. Hoe de robotmaaier werkt
- 5. Veiligheidsvoorzieningen
- 6. Voor uw veiligheid
- 7. Toelichting van de symbolen
- 8. Leveringsomvang
- 9. Eerste installatie
- 9.1 Aanwijzingen voor het dockingstation
- 9.2 Aansluitingen van het dockingstation
- 9.3 Voedingskabel op het dockingstation aansluiten
- 9.4 Installatiemateriaal
- 9.5 Accu inbouwen
- 9.6 Snijhoogte instellen
- 9.7 Aanwijzingen voor de eerste installatie
- 9.8 Taal, datum, tijd instellen
- 9.9 Dockingstation installeren
- 9.10 Begrenzingsdraad leggen
- 9.11 Begrenzingsdraad aansluiten
- 9.12 Robotmaaier en dockingstation koppelen
- 9.13 Installatie testen
- 9.14 Robotmaaier programmeren
- 9.15 Eerste installatie afsluiten
- 9.16 Eerste maaibeurt na de eerste installatie
- 10. iMow app
- 11. Menu
- 11.1 Bedieningsaanwijzingen
- 11.2 Statusmelding
- 11.3 Infogedeelte
- 11.4 Hoofdmenu
- 11.5 Commando’s
- 11.6 Maaischema
- 11.7 Actieve tijden
- 11.8 Maaiduur
- 11.9 Informatie
- 11.10 Instellingen
- 11.11 iMow – apparaatinstellingen
- 11.12 Regensensor instellen
- 11.13 Statusmelding instellen
- 11.14 Installatie
- 11.15 Startpunten instellen
- 11.16 Veiligheid
- 11.17 Service
- 12. Begrenzingsdraad
- 12.1 Ligging van de begrenzingsdraad plannen
- 12.2 Schets van het maaivlak maken
- 12.3 Begrenzingsdraad leggen
- 12.4 Begrenzingsdraad aansluiten
- 12.5 Draadafstanden – iMow Ruler gebruiken
- 12.6 Scherpe hoeken
- 12.7 Vernauwingen
- 12.8 Verbindingstrajecten installeren
- 12.9 Verboden zones
- 12.10 Aanpalende gazons
- 12.11 Doorgangen
- 12.12 Zoeklussen voor de verplaatste rit naar het begin
- 12.13 Precies langs randen maaien
- 12.14 Afhellend terrein in het maaivlak
- 12.15 Draadreserve installeren
- 12.16 Draadverbinders gebruiken
- 12.17 Smalle afstanden tot rand
- 13. Dockingstation
- 14. Tips voor het maaien
- 15. Apparaat in gebruik nemen
- 16. Onderhoud
- 17. Standaard reserveonderdelen
- 18. Accessoires
- 19. Slijtage minimaliseren en schade voorkomen
- 20. Milieubescherming
- 21. Transport
- 22. EU- conformiteitsverklaring
- 23. Technische gegevens
- 24. Meldingen
- 25. Defectopsporing
- 26. Onderhoudsschema
- 27. Installatievoorbeelden
- 1. Indice
- 2. Avvertenze sulle istruzioni per l’uso
- 3. Descrizione dell’apparecchio
- 4. Come funziona il robot tosaerba
- 5. Dispositivi per la sicurezza
- 6. Per la vostra sicurezza
- 6.1 Informazioni generali
- 6.2 Abbigliamento ed equipaggiamento
- 6.3 Attenzione – Pericoli causati da corrente elettrica
- 6.4 Accumulatore
- 6.5 Trasporto dell'apparecchio
- 6.6 Prima della messa in funzione
- 6.7 Programmazione
- 6.8 Durante il funzionamento
- 6.9 Manutenzione e riparazioni
- 6.10 Rimessaggio durante periodi di non utilizzo prolungati
- 6.11 Smaltimento
- 7. Descrizione dei simboli
- 8. Equipaggiamento fornito
- 9. Installazione iniziale
- 9.1 Indicazioni sulla docking station
- 9.2 Collegamenti della docking station
- 9.3 Collegamento del cavo di alimentazione alla docking station
- 9.4 Materiale d'installazione
- 9.5 Montaggio accumulatore
- 9.6 Regolazione dell'altezza di taglio
- 9.7 Indicazioni relative all'installazione iniziale
- 9.8 Impostazione lingua, data, ora
- 9.9 Installazione della docking station
- 9.10 Disposizione del filo perimetrale
- 9.11 Collegamento del filo perimetrale
- 9.12 Collegamento del robot tosaerba alla docking station
- 9.13 Controllo dell'installazione
- 9.14 Programmazione del robot tosaerba
- 9.15 Completamento dell'installazione iniziale
- 9.16 Prima azione di taglio dopo il completamento dell'installazione iniziale
- 10. App iMow
- 11. Menu
- 11.1 Indicazioni sui comandi
- 11.2 Indicatore di stato
- 11.3 Sezione informazioni
- 11.4 Menu principale
- 11.5 Preferiti
- 11.6 Schema taglio
- 11.7 Orari attivi
- 11.8 Durata taglio
- 11.9 Informazioni
- 11.10 Impostazioni
- 11.11 iMow – Impostazioni attrezzo
- 11.12 Regolazione sensore pioggia
- 11.13 Impostazione dell'indicatore Stato
- 11.14 Installazione
- 11.15 Impostazione dei punti di partenza
- 11.16 Sicurezza
- 11.17 Servizio
- 12. Filo perimetrale
- 12.1 Pianificazione della disposizione del filo perimetrale
- 12.2 Esecuzione schizzo dell'area di taglio
- 12.3 Disposizione del filo perimetrale
- 12.4 Collegare il filo perimetrale
- 12.5 Distanze filo – Utilizzo della dima distanziatrice iMow
- 12.6 Angoli acuti
- 12.7 Strettoie
- 12.8 Installazione dei tratti di collegamento
- 12.9 Superfici di sbarramento
- 12.10 Superfici secondarie
- 12.11 Passaggi
- 12.12 Circuiti guida per il ritorno in base sfalsato
- 12.13 Taglio perfetto lungo i bordi
- 12.14 Terreni pendenti nell'area di taglio
- 12.15 Installazione delle riserve di filo
- 12.16 Utilizzo delle connessioni filo
- 12.17 Distanze dal bordo strette
- 13. Docking station
- 14. Indicazioni per il taglio dell'erba
- 15. Messa in servizio dell'apparecchio
- 16. Manutenzione
- 17. Ricambi standard
- 18. Accessori
- 19. Minimizzare l’usura ed evitare danni
- 20. Tutela dell’ambiente
- 21. Trasporto
- 22. Dichiarazione di conformità EU
- 23. Dati tecnici
- 24. Messaggi
- 25. Risoluzione guasti
- 26. Programma Assistenza Tecnica
- 27. Esempi di installazione
0478 131 9942 C - EN
160
Pull out the pegs (1), remove the docking
station (2) from the lawn with the power
supply unit connected, clean thoroughly
(with a moist cloth) and put into storage.
● Store the robotic mower together with
the docking station and the power
supply unit in the normal position and in
a dry, closed and dust-free room. Dock
the robotic mower in the docking
station. Make sure that the machine is
kept out of the reach of children.
● Protect the terminals of the perimeter
wire from environmental influences
(e.g. wrap with suitable insulating tape).
● Reinstall the docking station in the
same way as during initial installation –
in particular connect the right and left
perimeter wire ends on the correct
sides. (Ö 9.9)
Mowing blade:
6309 702 0102
Battery AAI 131:
for RMI 632, RMI 632 C
6309 400 6504
Battery AAI 201:
for RMI 632 P, RMI 632 PC
6309 400 6516
– STIHL Kit S for mowing areas up to
500 m
2
– STIHL Kit L for mowing areas from
2,000 m
2
– 4,000 m
2
– Fixing pins STIHL AFN 075
– Perimeter wire STIHL ARB 501:
Length: 500 m
Diameter: 3,4 mm
– Wire connectors STIHL ADV 010
– Small-area module STIHL AKM 100
Additional accessories are available for
the machine.
Further information is available from your
STIHL specialist dealer, on the internet
(www.stihl.com) or in the
STIHL catalogue.
Important information on maintenance
and care of the product group
robotic mower, battery powered (STIHL
RMI)
STIHL assumes no liability for material or
personal damage caused by the non-
observance of information contained in the
operating instructions, in particular with
regard to safety, operation and
maintenance, or which arise through the
use of unauthorised attachment or spare
parts.
Please always observe the following
important information for the prevention of
damage or excessive wear to your STIHL
machine:
1. Wearing parts
Some parts of the STIHL machine are
subject to normal wear even when used
properly and must be replaced in due time
depending on type and duration of use.
These include:
– Mowing blade
–Battery
2. Compliance with the information in
this instruction manual
The STIHL machine must be used,
maintained and stored with the care
described in this instruction manual. Any
damage caused by non-compliance with
the safety, operating and maintenance
instructions is the sole responsibility of the
user.
This applies in particular to:
– Incorrect handling of the battery
(charging, storage)
– Incorrect electrical connection (voltage)
– Product modifications not approved by
STIHL
– Use of tools or accessories which are
not approved or suitable for the
machine, or are of inferior quality
– Improper use of the product
– Use of the product for sporting or
competitive events
17. Standard spare parts
18. Accessories
For safety reasons, only
accessories approved by STIHL
may be used with the machine.
19. Minimising wear and
preventing damage