User Instructions

0478 131 9942 C - EN
134
5. Radio module status
(RMI 632 C, RMI 632 PC):
Information on the radio module
– Satellites:
Number of satellites within range
– Position:
Current position of the robotic mower;
available if the satellite connection is
strong enough
– Signal strength:
Signal strength of the mobile radio
connection; the more plus characters
shown (max. "++++"), the better the
connection
–Network:
Network ID, comprising country code
(MCC) and provider code (MNC)
– Mobile phone number:
Mobile phone number of the owner; is
entered in the app (Ö 10.)
–IMEI:
Hardware number of the radio module
–IMSI:
International mobile subscriber identity
–SW:
Software version of the radio module
– Ser.-No.:
Serial number of the radio module
11.10 Settings
1. iMow:
Adapt machine settings
(Ö 11.11)
2. Installation:
Adapt and test the installation
(Ö 11.14)
3. Safety:
Adapt the safety settings (Ö 11.16)
4. Service:
Maintenance and service (Ö 11.17)
5. Dealer area:
This menu is protected by the
dealer code. Your specialist
dealer performs a variety of maintenance
and service operations with the aid of this
menu.
11.11 iMow – machine settings
1. Rain sensor:
The rain sensor can be set so that
mowing is interrupted or does not
start when it is raining.
● Set the rain sensor (Ö 11.12)
2. Mowing time:
Set the standard for the duration of a
mowing operation after activation of
the command "Start mowing". (Ö 11.5)
3. Delay:
Set the standard for the delay
following activation of the command
"Start time-delayed mowing". (Ö 11.5)
4. Status screen:
Select the information that is to
appear in the status screen.
(Ö 11.2)
● Set the status screen (Ö 11.13)
5. Time:
Set the current time.
The set time must correspond to the
actual time in order to prevent inadvertent
mowing by the robotic mower.
6. Date:
Set the current date.
The set date must correspond to the
actual calendar date in order to prevent
inadvertent operation of the robotic
mower.
7. Date format:
Set the required date format.
8. Track offset:
The robotic mower travels along the
perimeter wire at a 6 cm offset from
the wire as standard. With this offset,
optimum docking is ensured. The
iMow Ruler is also designed for a track
offset of 6 cm.
RMI 632 C, RMI 632 PC:
The time can also be set using the
app. (Ö 10.)
RMI 632 C, RMI 632 PC:
The date can also be set using the
app. (Ö 10.)