User Instructions

133
DEFRNLIT EN
0478 131 9942 C - EN
11.8 Mowing duration
The weekly mowing time can be set
under Adapt mowing duration.
The set value is adapted to the size
of the mowing area. (Ö 9.14)
Follow the instructions in the "Adapting the
programming" section. (Ö 15.3)
The command New mowing plan
deletes all stored active times. The
step "Program the robotic mower" of
the installation assistant is called up.
(Ö 9.8)
11.9 Information
1. Messages:
List of all active errors, faults and
recommendations; shown together
with the times of occurrence.
During trouble-free operation, the text "No
messages" appears.
The message details are displayed by
pressing the OK button. (Ö 24.)
2. Events:
List of the last activities of the robotic
mower.
Details of the events (additional text, time
and code) can be displayed by pressing
the OK button.
3. iMow status:
Information on the robotic
mower
– Charge state:
Battery charge in percent
–Rem. time:
The remaining mowing duration during
the current week in hours and minutes
– Time and date
– Start time:
Start of the next planned mowing
operation
– Total number of completed mowing
operations
– Mowing hours:
Duration of all completed mowing
operations in hours
–Distance:
Total distance covered in metres
–Ser.-No.:
Serial number of the robotic mower.
This is also to be found on the
identification plate in the compartment
beneath the control panel.
–Battery:
Serial number of the battery
– Software:
Installed machine software
4. Lawn status:
Information on the lawn
– Mowing area in square metres:
This value is entered during initial
installation or new installation (Ö 9.7)
– Round time:
Duration of one circuit around the
mowing area in minutes and seconds
– Starting points 1 – 4:
Distance of the relevant starting point
from the docking station in metres,
measured in a clockwise direction
(Ö 11.15)
–Circumference:
Circumference of the mowing area in
metres
– Edge mowing:
Frequency of edge mowing per week
(Ö 11.14)
RMI 632 C, RMI 632 PC:
The mowing duration can also be
set using the app. (Ö 10.)
If completion of the reprogramming
occurs during an active time, the
robotic mower begins an automatic
mowing operation after the
individual daily plans have been
confirmed.
If certain activities occur too
frequently, detailed information is
available from your specialist
dealer. Errors during normal
operation are documented in the
messages.