User Instructions

0478 131 9942 C - EN
130
11.3 Information area
The following information is shown in the
top right corner of the display:
1. Charge state of the battery or charging
in progress
2. Automatic mowing status
3. Time
4. Mobile radio signal (RMI 632 C,
RMI 632 PC)
1. Charge state:
The battery symbol serves to
indicate the charge state.
No bars – battery discharged
1 to 5 bars – battery partially
discharged
6 bars – battery fully charged
During charging, the mains plug
symbol is shown instead of the
battery symbol.
2. Automatic mowing status:
When automatic mowing is switched
on, the Automatic symbol appears.
3. Time:
The current time is indicated in 24 hour
format.
4. Mobile radio signal:
The signal strength of the
mobile radio connection is
indicated using 4 bars. The
more bars visible, the better
the reception.
A reception symbol with a
small x indicates that there is
no connection with the
Internet.
A question mark is shown
during initialisation of the radio module
(checking hardware and software – e.g.
after switching on the robotic mower).
11.4 Main menu
The main menu is displayed,
– by pressing the OK button
(Ö 11.2) the status screen is quit,
– when the "Main menu" command is
activated,
– when the Back button is pressed in the
second menu level.
1. Commands (Ö 11.5)
Main menu
Lock iMow
Switch automatic mowing on and off
Drive to docking station
Hand control
Start mowing
Start time-delayed mowing
Skip next active time
Edge mowing
2. Mowing plan (Ö 11.6)
Display weekly plan, edit active
times and mowing duration
3. Information (Ö 11.9)
Messages
Events
iMow status
Lawn status
Radio module status (RMI 632 C,
RMI 632 PC)
4. Settings (Ö 11.10)
iMow
Installation
Safety
Service
Dealer area
11.5 Commands
Select the required command using the
control pad and execute by pressing OK.