User Instructions
Table Of Contents
- 1. Inhaltsverzeichnis
- 2. Zu dieser Gebrauchsanleitung
- 3. Gerätebeschreibung
- 4. Wie der Robotermäher arbeitet
- 5. Sicherheitseinrichtungen
- 6. Zu Ihrer Sicherheit
- 7. Symbolbeschreibung
- 8. Lieferumfang
- 9. Erstinstallation
- 9.1 Hinweise zur Dockingstation
- 9.2 Anschlüsse der Dockingstation
- 9.3 Netzleitung an der Dockingstation anschließen
- 9.4 Installationsmaterial
- 9.5 Akku einbauen
- 9.6 Schnitthöhe einstellen
- 9.7 Hinweise zur ersten Installation
- 9.8 Sprache, Datum, Uhrzeit einstellen
- 9.9 Dockingstation installieren
- 9.10 Begrenzungsdraht verlegen
- 9.11 Begrenzungsdraht anschließen
- 9.12 Robotermäher und Dockingstation koppeln
- 9.13 Installation prüfen
- 9.14 Robotermäher programmieren
- 9.15 Erstinstallation abschließen
- 9.16 Erster Mähvorgang nach der Erstinstallation
- 10. iMow App
- 11. Menü
- 11.1 Bedienhinweise
- 11.2 Statusanzeige
- 11.3 Infobereich
- 11.4 Hauptmenü
- 11.5 Befehle
- 11.6 Mähplan
- 11.7 Aktivzeiten
- 11.8 Mähdauer
- 11.9 Information
- 11.10 Einstellungen
- 11.11 iMow – Geräteeinstellungen
- 11.12 Regensensor einstellen
- 11.13 Statusanzeige einstellen
- 11.14 Installation
- 11.15 Startpunkte einstellen
- 11.16 Sicherheit
- 11.17 Service
- 12. Begrenzungsdraht
- 12.1 Verlegung des Begrenzungsdrahts planen
- 12.2 Skizze der Mähfläche anfertigen
- 12.3 Begrenzungsdraht verlegen
- 12.4 Begrenzungsdraht anschließen
- 12.5 Drahtabstände – iMow Ruler verwenden
- 12.6 Spitze Ecken
- 12.7 Engstellen
- 12.8 Verbindungsstrecken installieren
- 12.9 Sperrflächen
- 12.10 Nebenflächen
- 12.11 Gassen
- 12.12 Suchschleifen für das versetzte Heimfahren
- 12.13 Kantenexaktes Mähen
- 12.14 Abfallendes Gelände in der Mähfläche
- 12.15 Drahtreserven installieren
- 12.16 Drahtverbinder verwenden
- 12.17 Enge Randabstände
- 13. Dockingstation
- 14. Hinweise zum Mähen
- 15. Gerät in Betrieb nehmen
- 16. Wartung
- 17. Übliche Ersatzteile
- 18. Zubehör
- 19. Verschleiß minimieren und Schäden vermeiden
- 20. Umweltschutz
- 21. Transport
- 22. EU- Konformitätserklärung
- 23. Technische Daten
- 24. Meldungen
- 25. Fehlersuche
- 26. Serviceplan
- 27. Installationsbeispiele
- 1. Table of contents
- 2. Notes on the instruction manual
- 3. Machine overview
- 4. How the robotic mower works
- 5. Safety devices
- 6. For your safety
- 7. Description of symbols
- 8. Standard equipment
- 9. Initial installation
- 9.1 Notes on the docking station
- 9.2 Docking station connections
- 9.3 Connecting the power cable to the docking station
- 9.4 Installation material
- 9.5 Installing the battery
- 9.6 Adjusting the cutting height
- 9.7 Notes on initial installation
- 9.8 Setting the language, date and time
- 9.9 Installing the docking station
- 9.10 Routing the perimeter wire
- 9.11 Connecting the perimeter wire
- 9.12 Linking the robotic mower and docking station
- 9.13 Check installation
- 9.14 Programming the robotic mower
- 9.15 Completing initial installation
- 9.16 First mowing operation after initial installation
- 10. iMow app
- 11. Menu
- 11.1 Operating instructions
- 11.2 Status screen
- 11.3 Information area
- 11.4 Main menu
- 11.5 Commands
- 11.6 Mowing plan
- 11.7 Active times
- 11.8 Mowing duration
- 11.9 Information
- 11.10 Settings
- 11.11 iMow – machine settings
- 11.12 Setting the rain sensor
- 11.13 Setting the status screen
- 11.14 Installation
- 11.15 Setting starting points
- 11.16 Safety
- 11.17 Service
- 12. Perimeter wire
- 12.1 Planning routing of the perimeter wire
- 12.2 Making a sketch of the mowing area
- 12.3 Routing the perimeter wire
- 12.4 Connecting the perimeter wire
- 12.5 Wire clearances – use iMow Ruler
- 12.6 Acute corners
- 12.7 Confined areas
- 12.8 Installing linking sections
- 12.9 No-go areas
- 12.10 Secondary areas
- 12.11 Corridors
- 12.12 Guide loops for offset drive home
- 12.13 Accurate mowing along edges
- 12.14 Sloping terrain in the mowing area
- 12.15 Installing reserve wire
- 12.16 Using wire connectors
- 12.17 Narrow edge clearances
- 13. Docking station
- 14. Notes on mowing
- 15. Operating the machine
- 16. Maintenance
- 16.1 Maintenance schedule
- 16.2 Cleaning the machine
- 16.3 Checking the mowing blade wear limits
- 16.4 Removing and installing the mowing blade
- 16.5 Sharpening the mowing blade
- 16.6 Removing and installing the carrier plate
- 16.7 Finding a wire break
- 16.8 Storage and winter break
- 16.9 Removing the docking station
- 17. Standard spare parts
- 18. Accessories
- 19. Minimising wear and preventing damage
- 20. Environmental protection
- 21. Transport
- 22. EU - Declaration of conformity
- 23. Technical specifications
- 24. Messages
- 25. Troubleshooting
- 26. Service schedule
- 27. Installation examples
- 1. Sommaire
- 2. À propos de ce manuel d’utilisation
- 3. Description de l’appareil
- 4. Mode de fonctionnement du robot de tonte
- 5. Dispositifs de sécurité
- 6. Consignes de sécurité
- 6.1 Généralités
- 6.2 Vêtements et équipement appropriés
- 6.3 Avertissement – dangers liés au courant électrique
- 6.4 Batterie
- 6.5 Transport de l’appareil
- 6.6 Avant la mise en service
- 6.7 Programmation
- 6.8 Pendant le fonctionnement de l’appareil
- 6.9 Entretien et réparations
- 6.10 Stockage prolongé
- 6.11 Mise au rebut
- 7. Signification des pictogrammes
- 8. Contenu de l’emballage
- 9. Première installation
- 9.1 Remarques concernant la station de base
- 9.2 Branchements de la station de base
- 9.3 Branchement du cordon d’alimentation secteur sur la station de base
- 9.4 Matériel d’installation
- 9.5 Montage de la batterie
- 9.6 Réglage de la hauteur de coupe
- 9.7 Consignes pour la première installation
- 9.8 Réglage de la langue, de la date et de l’heure
- 9.9 Installation de la station de base
- 9.10 Pose du fil de délimitation
- 9.11 Raccordement du fil de délimitation
- 9.12 Connexion du robot de tonte et de la station de base
- 9.13 Contrôle de l’installation
- 9.14 Programmation du robot de tonte
- 9.15 Fin de la première installation
- 9.16 Première tonte après la première installation
- 10. Application iMow
- 11. Menu
- 11.1 Remarques relatives à l’utilisation
- 11.2 Écran statut
- 11.3 Zone d’info
- 11.4 Menu principal
- 11.5 Commandes
- 11.6 Plan de tonte
- 11.7 Temps actifs
- 11.8 Durée de tonte
- 11.9 Informations
- 11.10 Réglages
- 11.11 iMow – Réglages de l’appareil
- 11.12 Réglage du capteur de pluie
- 11.13 Réglage de l’écran statut
- 11.14 Installation
- 11.15 Réglage des points de départ
- 11.16 Sécurité
- 11.17 Service
- 12. Fil de délimitation
- 12.1 Planification de la pose du fil de délimitation
- 12.2 Réalisation du croquis de la zone de tonte
- 12.3 Pose du fil de délimitation
- 12.4 Raccordement du fil de délimitation
- 12.5 Distances du fil – Utilisation de l’iMow Ruler
- 12.6 Coins pointus
- 12.7 Points d'étranglement
- 12.8 Installation de sections de liaison
- 12.9 Îlots de blocage
- 12.10 Zones annexes
- 12.11 Couloirs
- 12.12 Boucles de recherche pour le trajet retour décalé
- 12.13 Tonte précise des bords
- 12.14 Terrain en pente dans la zone de tonte
- 12.15 Installation de réserves de fil
- 12.16 Utilisation des connecteurs de fil
- 12.17 Distances étroites en bordure
- 13. Station de base
- 14. Conseils pour la tonte
- 15. Mise en service de l’appareil
- 16. Entretien
- 16.1 Plan d’entretien
- 16.2 Nettoyage de l’appareil
- 16.3 Contrôle des limites d’usure de la lame de coupe
- 16.4 Dépose et repose de la lame de coupe
- 16.5 Affûtage de la lame de coupe
- 16.6 Dépose et repose du disque d’entraînement
- 16.7 Chercher rupture fil
- 16.8 Rangement de l’appareil et hivernage
- 16.9 Démontage de la station de base
- 17. Pièces de rechange courantes
- 18. Accessoires
- 19. Comment limiter l’usure et éviter les dommages
- 20. Protection de l’environnement
- 21. Transport
- 22. Déclaration de conformité UE
- 23. Caractéristiques techniques
- 24. Messages
- 25. Recherche des pannes
- 26. Feuille d’entretien
- 27. Exemples d’installation
- 1. Inhoudsopgave
- 2. Over deze gebruiksaanwijzing
- 3. Beschrijving van het apparaat
- 4. Hoe de robotmaaier werkt
- 5. Veiligheidsvoorzieningen
- 6. Voor uw veiligheid
- 7. Toelichting van de symbolen
- 8. Leveringsomvang
- 9. Eerste installatie
- 9.1 Aanwijzingen voor het dockingstation
- 9.2 Aansluitingen van het dockingstation
- 9.3 Voedingskabel op het dockingstation aansluiten
- 9.4 Installatiemateriaal
- 9.5 Accu inbouwen
- 9.6 Snijhoogte instellen
- 9.7 Aanwijzingen voor de eerste installatie
- 9.8 Taal, datum, tijd instellen
- 9.9 Dockingstation installeren
- 9.10 Begrenzingsdraad leggen
- 9.11 Begrenzingsdraad aansluiten
- 9.12 Robotmaaier en dockingstation koppelen
- 9.13 Installatie testen
- 9.14 Robotmaaier programmeren
- 9.15 Eerste installatie afsluiten
- 9.16 Eerste maaibeurt na de eerste installatie
- 10. iMow app
- 11. Menu
- 11.1 Bedieningsaanwijzingen
- 11.2 Statusmelding
- 11.3 Infogedeelte
- 11.4 Hoofdmenu
- 11.5 Commando’s
- 11.6 Maaischema
- 11.7 Actieve tijden
- 11.8 Maaiduur
- 11.9 Informatie
- 11.10 Instellingen
- 11.11 iMow – apparaatinstellingen
- 11.12 Regensensor instellen
- 11.13 Statusmelding instellen
- 11.14 Installatie
- 11.15 Startpunten instellen
- 11.16 Veiligheid
- 11.17 Service
- 12. Begrenzingsdraad
- 12.1 Ligging van de begrenzingsdraad plannen
- 12.2 Schets van het maaivlak maken
- 12.3 Begrenzingsdraad leggen
- 12.4 Begrenzingsdraad aansluiten
- 12.5 Draadafstanden – iMow Ruler gebruiken
- 12.6 Scherpe hoeken
- 12.7 Vernauwingen
- 12.8 Verbindingstrajecten installeren
- 12.9 Verboden zones
- 12.10 Aanpalende gazons
- 12.11 Doorgangen
- 12.12 Zoeklussen voor de verplaatste rit naar het begin
- 12.13 Precies langs randen maaien
- 12.14 Afhellend terrein in het maaivlak
- 12.15 Draadreserve installeren
- 12.16 Draadverbinders gebruiken
- 12.17 Smalle afstanden tot rand
- 13. Dockingstation
- 14. Tips voor het maaien
- 15. Apparaat in gebruik nemen
- 16. Onderhoud
- 17. Standaard reserveonderdelen
- 18. Accessoires
- 19. Slijtage minimaliseren en schade voorkomen
- 20. Milieubescherming
- 21. Transport
- 22. EU- conformiteitsverklaring
- 23. Technische gegevens
- 24. Meldingen
- 25. Defectopsporing
- 26. Onderhoudsschema
- 27. Installatievoorbeelden
- 1. Indice
- 2. Avvertenze sulle istruzioni per l’uso
- 3. Descrizione dell’apparecchio
- 4. Come funziona il robot tosaerba
- 5. Dispositivi per la sicurezza
- 6. Per la vostra sicurezza
- 6.1 Informazioni generali
- 6.2 Abbigliamento ed equipaggiamento
- 6.3 Attenzione – Pericoli causati da corrente elettrica
- 6.4 Accumulatore
- 6.5 Trasporto dell'apparecchio
- 6.6 Prima della messa in funzione
- 6.7 Programmazione
- 6.8 Durante il funzionamento
- 6.9 Manutenzione e riparazioni
- 6.10 Rimessaggio durante periodi di non utilizzo prolungati
- 6.11 Smaltimento
- 7. Descrizione dei simboli
- 8. Equipaggiamento fornito
- 9. Installazione iniziale
- 9.1 Indicazioni sulla docking station
- 9.2 Collegamenti della docking station
- 9.3 Collegamento del cavo di alimentazione alla docking station
- 9.4 Materiale d'installazione
- 9.5 Montaggio accumulatore
- 9.6 Regolazione dell'altezza di taglio
- 9.7 Indicazioni relative all'installazione iniziale
- 9.8 Impostazione lingua, data, ora
- 9.9 Installazione della docking station
- 9.10 Disposizione del filo perimetrale
- 9.11 Collegamento del filo perimetrale
- 9.12 Collegamento del robot tosaerba alla docking station
- 9.13 Controllo dell'installazione
- 9.14 Programmazione del robot tosaerba
- 9.15 Completamento dell'installazione iniziale
- 9.16 Prima azione di taglio dopo il completamento dell'installazione iniziale
- 10. App iMow
- 11. Menu
- 11.1 Indicazioni sui comandi
- 11.2 Indicatore di stato
- 11.3 Sezione informazioni
- 11.4 Menu principale
- 11.5 Preferiti
- 11.6 Schema taglio
- 11.7 Orari attivi
- 11.8 Durata taglio
- 11.9 Informazioni
- 11.10 Impostazioni
- 11.11 iMow – Impostazioni attrezzo
- 11.12 Regolazione sensore pioggia
- 11.13 Impostazione dell'indicatore Stato
- 11.14 Installazione
- 11.15 Impostazione dei punti di partenza
- 11.16 Sicurezza
- 11.17 Servizio
- 12. Filo perimetrale
- 12.1 Pianificazione della disposizione del filo perimetrale
- 12.2 Esecuzione schizzo dell'area di taglio
- 12.3 Disposizione del filo perimetrale
- 12.4 Collegare il filo perimetrale
- 12.5 Distanze filo – Utilizzo della dima distanziatrice iMow
- 12.6 Angoli acuti
- 12.7 Strettoie
- 12.8 Installazione dei tratti di collegamento
- 12.9 Superfici di sbarramento
- 12.10 Superfici secondarie
- 12.11 Passaggi
- 12.12 Circuiti guida per il ritorno in base sfalsato
- 12.13 Taglio perfetto lungo i bordi
- 12.14 Terreni pendenti nell'area di taglio
- 12.15 Installazione delle riserve di filo
- 12.16 Utilizzo delle connessioni filo
- 12.17 Distanze dal bordo strette
- 13. Docking station
- 14. Indicazioni per il taglio dell'erba
- 15. Messa in servizio dell'apparecchio
- 16. Manutenzione
- 17. Ricambi standard
- 18. Accessori
- 19. Minimizzare l’usura ed evitare danni
- 20. Tutela dell’ambiente
- 21. Trasporto
- 22. Dichiarazione di conformità EU
- 23. Dati tecnici
- 24. Messaggi
- 25. Risoluzione guasti
- 26. Programma Assistenza Tecnica
- 27. Esempi di installazione
101
DEFRNLIT EN
0478 131 9942 C - EN
5.3 Protective covers
The robotic mower is equipped with
protective covers that prevent inadvertent
contact with the mowing blade and the
clippings.
These include, in particular, the hood.
5.4 Two-hand operation
During manual mowing, the mowing
blade can only be activated if the OK
button is pressed and held with the
right thumb and the Mow button is
then pressed with the left thumb.
Once activated, only the Mow button must
remain pressed in order to continue
mowing.
5.5 Impact sensor
The robotic mower is equipped with a
movable hood which serves as an impact
sensor. During automatic operation, it
immediately comes to a standstill if it
comes into contact with a solid obstacle
which has a specific minimum height
(10 cm) and is firmly attached to the
ground. It then turns to face another
direction and continues mowing. If the
impact sensor is triggered too frequently,
the mowing blade is also stopped.
5.6 Lifting protection
If the robotic mower is lifted by the hood or
at the carrying handle, mowing is stopped
immediately. The mowing blade comes to
a standstill within a few seconds.
5.7 Tilt sensor
If the permissible slope inclination is
exceeded during operation, the robotic
mower immediately changes its direction
of travel. In the event of a rollover, the
wheel drive and mowing motors are
switched off.
5.8 Display illumination
The display illumination is activated during
operation. Thanks to this illumination, the
robotic mower is easily recognisable, even
in darkness.
5.9 Anti-theft alarm
When the anti-theft alarm is activated, an
alarm signal sounds when the robotic
mower is lifted unless the PIN code is
entered within one minute. (Ö 11.16)
The robotic mower can only be operated in
conjunction with the docking station
supplied. A further docking station must be
linked with the robotic mower. (Ö 11.16)
5.10 GPS protection
The models RMI 632 C, RMI 632 PC are
equipped with a GPS receiver. When GPS
protection is activated, the owner of the
machine is notified if the machine is
operated outside the home area. The PIN
code is also requested on the display.
(Ö 14.5)
6.1 General
These safety regulations must
be observed when working with
the machine.
Read the entire instruction
manual before using the
machine for the first time. Keep
the instruction manual in a safe
place for future reference.
These safety precautions are essential for
your safety, however the list is not
exhaustive. Always use the machine in a
reasonable and responsible manner and
be aware that the user is responsible for
accidents involving third parties or their
property.
The term "use" covers all work on the
robotic mower, the docking station and the
perimeter wire.
A "User" is defined as:
– A person who reprograms the robotic
mower or changes the existing
programming.
Impacts against obstacles occur
with a certain force. Sensitive
obstacles, e.g. light objects such as
small flower pots, can therefore be
knocked over or damaged.
STIHL recommends removing
obstacles or blocking them off by
means of no-go areas. (Ö 12.9)
STIHL recommends that one of the
safety levels "Low", "Medium" or
"High" be set. This ensures that
unauthorised persons cannot
operate the robotic mower using
other docking stations and are
unable to change settings or the
programming.
Recommendation:
Always activate GPS protection.
(Ö 11.16)
6. For your safety