Instruction Manual
Table Of Contents
- 1. Table of contents
- 2. Notes on the instruction manual
- 3. Machine overview
- 4. How the robotic mower works
- 5. Safety devices
- 6. For your safety
- 7. Description of symbols
- 8. Standard equipment
- 9. Initial installation
- 9.1 Notes on the docking station
- 9.2 Docking station connections
- 9.3 Connecting the power cable to the docking station
- 9.4 Installation material
- 9.5 Adjusting the cutting height
- 9.6 Notes on initial installation
- 9.7 Setting the language, date and time
- 9.8 Installing the docking station
- 9.9 Routing the perimeter wire
- 9.10 Connecting the perimeter wire
- 9.11 Linking the robotic mower and docking station
- 9.12 Checking installation
- 9.13 Programming the robotic mower
- 9.14 Completing initial installation
- 9.15 First mowing operation after initial installation
- 10. iMOW® app
- 11. Menu
- 11.1 Operating instructions
- 11.2 Status screen
- 11.3 Information area
- 11.4 Main menu
- 11.5 Start
- 11.6 Drive home
- 11.7 Mowing plan
- 11.8 More
- 11.9 Settings
- 11.10 iMOW® – machine settings
- 11.11 Setting the rain sensor
- 11.12 Configuring the status screen
- 11.13 Installation
- 11.14 Setting starting points
- 11.15 Direct drive home
- 11.16 Safety
- 11.17 Service
- 11.18 Information
- 12. Perimeter wire
- 12.1 Planning routing of the perimeter wire
- 12.2 Making a sketch of the mowing area
- 12.3 Routing the perimeter wire
- 12.4 Connecting the perimeter wire
- 12.5 Wire clearances – use iMOW® Ruler
- 12.6 Acute corners
- 12.7 Confined areas
- 12.8 Installing linking sections
- 12.9 No-go areas
- 12.10 Secondary areas
- 12.11 Corridors
- 12.12 Guide loops for offset drive home
- 12.13 Accurate mowing along edges
- 12.14 Sloping terrain along the perimeter wire
- 12.15 Installing reserve wire
- 12.16 Using wire connectors
- 12.17 Narrow edge clearances
- 13. Docking station
- 14. Notes on mowing
- 15. Operating the machine
- 16. Maintenance
- 16.1 Maintenance schedule
- 16.2 Cleaning the machine
- 16.3 Checking the mowing blade wear limits
- 16.4 Removing and installing the mowing blade
- 16.5 Sharpening the mowing blade
- 16.6 Removing and installing the carrier plate
- 16.7 Finding a wire break
- 16.8 Storage and winter break
- 16.9 Removing the docking station
- 17. Standard spare parts
- 18. Accessories
- 19. Minimising wear and preventing damage
- 20. Environmental protection
- 21. Transport
- 22. Declaration of conformity
- 23. Technical specifications
- 24. Messages
- 25. Troubleshooting
- 26. Service schedule
- 27. Installation examples
- 28. Open source software
- 1. Índice
- 2. Acerca de este manual de instrucciones
- 3. Descripción del equipo
- 4. Cómo trabaja el robot cortacésped
- 5. Dispositivos de seguridad
- 6. Para su seguridad
- 6.1 Información general
- 6.2 Ropa y equipamiento de trabajo
- 6.3 Advertencia de peligros causados por la corriente eléctrica
- 6.4 Batería
- 6.5 Transporte de la máquina
- 6.6 Antes de la puesta en servicio
- 6.7 Programación
- 6.8 Durante el servicio
- 6.9 Mantenimiento y reparaciones
- 6.10 Almacenamiento durante largos periodos de inactividad
- 6.11 Eliminación
- 7. Descripción de los símbolos
- 8. Contenido del suministro
- 9. Instalación inicial
- 9.1 Indicaciones para la estación de carga
- 9.2 Conexiones de la estación de carga
- 9.3 Conectar el cable de alimentación a la estación de carga
- 9.4 Material de instalación
- 9.5 Ajustar la altura de corte
- 9.6 Indicaciones para la primera instalación
- 9.7 Ajustar idioma, fecha y hora
- 9.8 Instalar la estación de carga
- 9.9 Tender el cable delimitador
- 9.10 Conectar el cable delimitador
- 9.11 Conectar el robot cortacésped y la estación de carga
- 9.12 Comprobar la instalación
- 9.13 Programar el robot cortacésped
- 9.14 Finalizar la primera instalación
- 9.15 Primer proceso de corte tras finalizar la primera instalación
- 10. Aplicación iMOW®
- 11. Menú
- 11.1 Instrucciones de manejo
- 11.2 Indicador de estado
- 11.3 Campo de información
- 11.4 Menú principal
- 11.5 Inicio
- 11.6 Regreso est.
- 11.7 Plan de corte
- 11.8 Más
- 11.9 Ajustes
- 11.10 Ajustes de la máquina iMOW®
- 11.11 Ajustar el sensor de lluvia
- 11.12 Ajustar el indicador de estado
- 11.13 Instalación
- 11.14 Ajustar los puntos de inicio
- 11.15 Regreso directo a la estación
- 11.16 Seguridad
- 11.17 Servicio
- 11.18 Información
- 12. Cable delimitador
- 12.1 Planificar el tendido del cable delimitador
- 12.2 Preparar un croquis de la superficie a cortar
- 12.3 Tender el cable delimitador
- 12.4 Conectar el cable delimitador
- 12.5 Distancias del cable – Usar la regla virtual iMOW®
- 12.6 Esquinas pronunciadas
- 12.7 Pasos estrechos
- 12.8 Instalar tramos de unión
- 12.9 Superficies prohibidas
- 12.10 Superficies contiguas
- 12.11 Pasillos
- 12.12 Lazos de búsqueda para el regreso desplazado
- 12.13 Corte preciso de bordes
- 12.14 Terreno inclinado a lo largo del cable delimitador
- 12.15 Instalar reservas de cable
- 12.16 Utilizar conectores de cable
- 12.17 Distancias al borde reducidas
- 13. Estación de carga
- 14. Indicaciones para cortar
- 15. Poner el equipo en servicio
- 16. Mantenimiento
- 16.1 Plan de mantenimiento
- 16.2 Limpiar la máquina
- 16.3 Comprobar los límites de desgaste de la cuchilla
- 16.4 Desmontar y montar la cuchilla
- 16.5 Afilar la cuchilla
- 16.6 Desmontar y montar el disco de arrastre
- 16.7 Buscar rotura de cable
- 16.8 Almacenamiento y parada invernal
- 16.9 Desmontaje de la estación de carga
- 17. Piezas de recambio habituales
- 18. Accesorios
- 19. Reducir el desgaste y prevenir daños
- 20. Protección del medio ambiente
- 21. Transporte
- 22. Declaración de conformidad
- 23. Datos técnicos
- 24. Mensajes
- 25. Localización de anomalías
- 26. Plan de mantenimiento
- 27. Ejemplos de instalación
- 28. Software de Open Source
- 1. Índice
- 2. Sobre este manual de utilização
- 3. Descrição do aparelho
- 4. Modo de funcionamento do robot cortador de relva
- 5. Dispositivos de segurança
- 6. Para sua segurança
- 6.1 Generalidades
- 6.2 Vestuário e equipamento
- 6.3 Aviso – Perigos originados pela corrente elétrica
- 6.4 Bateria
- 6.5 Transporte do aparelho
- 6.6 Antes da colocação em funcionamento
- 6.7 Programação
- 6.8 Durante o funcionamento
- 6.9 Manutenção e reparações
- 6.10 Armazenamento no caso de períodos de paragem mais longos
- 6.11 Eliminação
- 7. Descrição de símbolos
- 8. Fornecimento
- 9. Primeira instalação
- 9.1 Indicações sobre a unidade de acoplamento
- 9.2 Ligações da unidade de acoplamento
- 9.3 Ligar o cabo de rede à unidade de acoplamento
- 9.4 Material de instalação
- 9.5 Ajustar a altura de corte
- 9.6 Instruções sobre a primeira instalação
- 9.7 Definir o idioma e acertar a data e a hora
- 9.8 Instalar a unidade de acoplamento
- 9.9 Colocar o fio metálico limitador
- 9.10 Ligar o fio metálico limitador
- 9.11 Acoplar o robot cortador de relva e a unidade de acoplamento
- 9.12 Verificar a instalação
- 9.13 Programar o robot cortador de relva
- 9.14 Concluir a primeira instalação
- 9.15 Primeiro processo de corte após a primeira instalação
- 10. Aplicação iMOW®
- 11. Menu
- 11.1 Indicações de manuseamento
- 11.2 Indicação de estado
- 11.3 Área de informações
- 11.4 Menu principal
- 11.5 Início
- 11.6 Regresso
- 11.7 Plano de corte
- 11.8 Mais
- 11.9 Ajustes
- 11.10 iMOW® – ajustes do aparelho
- 11.11 Ajustar o sensor de chuva
- 11.12 Ajustar indicação de estado
- 11.13 Instalação
- 11.14 Definir pontos iniciais
- 11.15 Regresso direto
- 11.16 Segurança
- 11.17 Serviço
- 11.18 Informação
- 12. Fio metálico limitador
- 12.1 Planear a colocação do fio metálico limitador
- 12.2 Criar um esboço da superfície a cortar
- 12.3 Colocar o fio metálico limitador
- 12.4 Ligar o fio metálico limitador
- 12.5 Distâncias do fio – utilizar a régua iMOW®
- 12.6 Cantos pontiagudos
- 12.7 Locais estreitos
- 12.8 Instalar trajetos de ligação
- 12.9 Superfícies de bloqueio
- 12.10 Superfícies circundantes
- 12.11 Travessas
- 12.12 Circuitos de procura para o desvio do regresso
- 12.13 Corte exato da relva nos cantos
- 12.14 Terrenos inclinados ao longo do fio metálico limitador
- 12.15 Instalar reservas de fio
- 12.16 Utilizar conetores com fio
- 12.17 Distâncias estreitas da margem
- 13. Unidade de acoplamento
- 14. Indicações sobre cortar a relva
- 15. Colocar o aparelho em funcionamento
- 16. Manutenção
- 16.1 Plano de manutenção
- 16.2 Limpar o aparelho
- 16.3 Verificar os limites de desgaste da lâmina de corte
- 16.4 Desmontar e montar a lâmina de corte
- 16.5 Afiar a lâmina de corte
- 16.6 Montar e desmontar o disco de arrastamento
- 16.7 Procurar quebra do fio
- 16.8 Arrumação e período de inverno
- 16.9 Desmontagem da unidade de acoplamento
- 17. Peças de reposição comuns
- 18. Acessórios
- 19. Minimização do desgaste e prevenção de danos
- 20. Proteção do meio ambiente
- 21. Transporte
- 22. Declaração de conformidade
- 23. Dados técnicos
- 24. Mensagens
- 25. Localização de falhas
- 26. Plano de manutenção
- 27. Exemplos de Instalação
- 28. Software de código aberto
- 1. Kazalo
- 2. O navodilih za uporabo
- 3. Opis naprave
- 4. Kako deluje robotska kosilnica
- 5. Varnostna oprema
- 6. Za vašo varnost
- 7. Opis simbolov
- 8. Obseg dobave
- 9. Prva namestitev
- 9.1 Napotki za polnilno postajo
- 9.2 Priključki polnilne postaje
- 9.3 Priključitev omrežja na polnilno postajo
- 9.4 Material za namestitev
- 9.5 Nastavitev višine košnje
- 9.6 Napotki pri prvi namestitvi
- 9.7 Nastavitev jezika, datuma in časa
- 9.8 Namestitev polnilne postaje
- 9.9 Polaganje omejitvene žice
- 9.10 Priključitev omejitvene žice
- 9.11 Seznanjanje robotske kosilnice in polnilne postaje
- 9.12 Preverjanje namestitve
- 9.13 Programiranje robotske kosilnice
- 9.14 Zaključek prve namestitve
- 9.15 Prva košnja po prvi namestitvi
- 10. Aplikacija iMOW®
- 11. Meni
- 11.1 Navodila za upravljanje
- 11.2 Prikaz stanja
- 11.3 Območje z informacijami
- 11.4 Glavni meni
- 11.5 Začetek
- 11.6 Povratek
- 11.7 Načrt za košnjo
- 11.8 Več
- 11.9 Nastavitve
- 11.10 iMOW® – nastavitve naprave
- 11.11 Nastavitev senzorja za dež
- 11.12 Nastavitev prikaza stanja
- 11.13 Namestitev
- 11.14 Nastavitev začetnih točk
- 11.15 Neposreden povratek
- 11.16 Varnost
- 11.17 Servis
- 11.18 Informacije
- 12. Omejitvena žica
- 12.1 Načrtovanje polaganja omejitvene žice
- 12.2 Napravite skico površine za košnjo
- 12.3 Polaganje omejitvene žice
- 12.4 Priključitev omejitvene žice
- 12.5 Razdalje žice – uporaba merila iMOW® Ruler
- 12.6 Ostri koti
- 12.7 Zoženja
- 12.8 Namestitev povezovalnih prog
- 12.9 Zaporne površine
- 12.10 Stranske površine
- 12.11 Pasaže
- 12.12 Iskalne zanke za zamaknjen povratek
- 12.13 Natančno košenje robov
- 12.14 Padajoč teren vzdolž omejitvene žice
- 12.15 Priprava rezerve žice
- 12.16 Uporaba spojnikov kabla
- 12.17 Majhne razdalje do roba
- 13. Polnilna postaja
- 14. Navodila za košnjo
- 15. Začetek uporabe naprave
- 16. Vzdrževanje
- 17. Običajni nadomestni deli
- 18. Oprema
- 19. Zmanjšanje obrabe in preprečevanje okvar
- 20. Varovanje okolja
- 21. Transport
- 22. Izjava o skladnosti
- 23. Tehnični podatki
- 24. Sporočila
- 25. Iskanje napak
- 26. Načrt servisiranja
- 27. Primeri namestitve
- 28. Odprtokodna programska oprema
- 1. Obsah
- 2. O tomto návode na obsluhu
- 3. Popis stroja
- 4. Princíp fungovania kosačky-robota
- 5. Bezpečnostné zariadenia
- 6. Pre vašu bezpečnosť
- 7. Popis symbolov
- 8. Rozsah dodávky
- 9. Úvodná inštalácia
- 9.1 Pokyny k nabíjacej stanici
- 9.2 Prípojky nabíjacej stanice
- 9.3 Pripojenie sieťového vedenia k nabíjacej stanici
- 9.4 Inštalačný materiál
- 9.5 Nastavenie výšky kosenia
- 9.6 Pokyny pre úvodnú inštaláciu
- 9.7 Nastavenie jazyka, dátumu a času
- 9.8 Inštalácia nabíjacej stanice
- 9.9 Natiahnutie obmedzovacieho vodiča
- 9.10 Pripojenie obmedzovacieho vodiča
- 9.11 Párovanie kosačky-robota a nabíjacej stanice
- 9.12 Kontrola inštalácie
- 9.13 Programovanie kosačky-robota
- 9.14 Dokončenie úvodnej inštalácie
- 9.15 Prvý proces kosenia po prvej inštalácii
- 10. Aplikácia iMOW®
- 11. Ponuka
- 11.1 Pokyny na ovládanie
- 11.2 Indikátor stavu
- 11.3 Informačná oblasť
- 11.4 Hlavná ponuka
- 11.5 Štart
- 11.6 Cesta domov
- 11.7 Plán kosenia
- 11.8 Viac
- 11.9 Nastavenia
- 11.10 iMOW® – nastavenia stroja
- 11.11 Nastavenie dažďového senzora
- 11.12 Nastavenie indikátora stavu
- 11.13 Inštalácia
- 11.14 Nastavenie východiskových bodov
- 11.15 Priama cesta domov
- 11.16 Bezpečnosť
- 11.17 Servis
- 11.18 Informácie
- 12. Obmedzovací vodič
- 12.1 Naplánovanie položenia obmedzovacieho vodiča
- 12.2 Vytvorenie náčrtu kosenej plochy
- 12.3 Natiahnutie obmedzovacieho vodiča
- 12.4 Pripojenie obmedzovacieho vodiča
- 12.5 Vzdialenosti drôtov – použitie iMOW® Ruler
- 12.6 Ostré rohy
- 12.7 Zúžené miesta
- 12.8 Inštalácia prepájacích dráh
- 12.9 Zakázané plochy
- 12.10 Vedľajšie plochy
- 12.11 Uličky
- 12.12 Vyhľadávacie slučky pre posunutú návratovú dráhu domov
- 12.13 Presné kosenie na hrany
- 12.14 Klesajúci terén pozdĺž obmedzovacieho vodiča
- 12.15 Inštalácia rezervných dĺžok drôtu
- 12.16 Používanie drôtových spojok
- 12.17 Úzke vzdialenosti od okraja
- 13. Nabíjacia stanica
- 14. Pokyny pre kosenie
- 15. Uvedenie stroja do prevádzky
- 16. Údržba
- 17. Bežné náhradné diely
- 18. Príslušenstvo
- 19. Opatrenia na minimalizovanie opotrebovania a na zabránenie vzniku škôd
- 20. Ochrana životného prostredia
- 21. Preprava stroja
- 22. Prehlásenie o zhode výrobcom
- 23. Technické údaje
- 24. Hlásenia
- 25. Hľadanie porúch
- 26. Servisný plán
- 27. Príklady inštalácie
- 28. Softvér s otvoreným zdrojom
- 1. Obsah
- 2. O tomto návodu k použití
- 3. Popis stroje
- 4. Jak robotická sekačka pracuje
- 5. Bezpečnostní zařízení
- 6. Pro vaši bezpečnost
- 7. Popis symbolů
- 8. Rozsah dodávky
- 9. První instalace
- 9.1 Pokyny k dobíjecí stanici
- 9.2 Přípojky dobíjecí stanice
- 9.3 Připojení napájecího kabelu k dobíjecí stanici
- 9.4 Instalační materiál
- 9.5 Nastavení výšky sečení
- 9.6 Pokyny k první instalaci
- 9.7 Nastavení jazyka, data a času
- 9.8 Instalace dobíjecí stanice
- 9.9 Uložení omezovacího drátu
- 9.10 Připojení omezovacího drátu
- 9.11 Propojení robotické sekačky a dobíjecí stanice
- 9.12 Kontrola instalace
- 9.13 Programování robotické sekačky
- 9.14 Dokončení první instalace
- 9.15 První proces sečení po první instalaci
- 10. Aplikace iMOW®
- 11. Menu
- 11.1 Pokyny k obsluze
- 11.2 Indikátor stavu
- 11.3 Informační oblast
- 11.4 Hlavní menu
- 11.5 Start
- 11.6 Návrat domů
- 11.7 Vyžínací plán
- 11.8 Více
- 11.9 Nastavení
- 11.10 iMOW® – Nastavení stroje
- 11.11 Nastavení dešťového čidla
- 11.12 Nastavení indikátoru stavu
- 11.13 Instalace
- 11.14 Nastavení výchozích bodů
- 11.15 Přímý návrat domů
- 11.16 Bezpečnost
- 11.17 Servis
- 11.18 Informace
- 12. Omezovací drát
- 12.1 Plánování trasy omezovacího drátu
- 12.2 Nákres sečené plochy
- 12.3 Uložení omezovacího drátu
- 12.4 Připojení omezovacího drátu
- 12.5 Vzdálenost drátu – použití pravítka iMOW®
- 12.6 Rohy s ostrým úhlem
- 12.7 Úzká místa
- 12.8 Instalace propojovacích cestiček
- 12.9 Uzavřené plochy
- 12.10 Vedlejší plochy
- 12.11 Úzké průchody
- 12.12 Vyhledávací smyčky pro funkci odsazení od okraje při návratu domů
- 12.13 Přesné sečení na hranách
- 12.14 Svažující se terén podél omezovacího drátu
- 12.15 Instalace rezervy drátu
- 12.16 Použití elektrických konektorů
- 12.17 Těsné vzdálenosti od okrajů
- 13. Dobíjecí stanice
- 14. Pokyny pro sečení
- 15. Uvedení stroje do provozu
- 16. Údržba
- 17. Běžné náhradní díly
- 18. Příslušenství
- 19. Opatření pro minimalizování opotřebení a zabránění vzniku škod
- 20. Ochrana životního prostředí
- 21. Přeprava stroje
- 22. Prohlášení o shodnosti výroby
- 23. Technické údaje
- 24. Hlášení
- 25. Hledání závad
- 26. Servisní plán
- 27. Příklady pro instalaci
- 28. Open-source software
0478 131 9265 B - EN
12
Only give or lend the machine to persons
who are familiar with this model and how to
operate it. The instruction manual forms
part of the machine and must always be
provided to persons operating it.
Make sure that the user is physically,
sensorily and mentally capable of
operating the machine and working with it.
If the user is physically, sensorily or
mentally impaired, the machine must only
be used under supervision or following
instruction by a responsible person.
Make sure that the user is of legal age or
being trained under supervision in a
profession in accordance with national
regulations.
Children must be kept away
from the machine and
mowing area during mowing
operation.
Dogs and other pets must be
kept away from the machine
and mowing area during
mowing operation.
For safety reasons, any
modification to the machine, except the
proper installation of accessories or
attachments approved by STIHL, is
forbidden and results in voiding of the
warranty cover. Information regarding
approved accessories and attachments
can be obtained from your STIHL
specialist dealer.
In particular, any tampering with the
machine which increases the power output
or speed of the motors is forbidden.
It is not permissible to make any
modifications to the machine that could
lead to increased noise emissions.
For safety reasons, the machine software
must never be modified or tampered with.
Particular care is required during use in
public green spaces, parks, sports fields,
along roads and in agricultural and forestry
businesses.
It is not permitted to transport objects,
animals or persons, particularly children,
on the machine.
Never allow people, particularly children,
to ride or sit on the robotic mower.
Caution – risk of accident!
The robotic mower is intended for
automatic lawn care. Its use for other
purposes is not permitted and may be
dangerous or result in damage to the
machine.
Due to the physical danger to the user, the
machine must not be used for the following
applications (incomplete list):
– for trimming bushes, hedges and
shrubs,
– for cutting creepers,
– for the care of lawn roofs and balcony
boxes,
– for shredding or chipping tree or hedge
cuttings,
– for clearing paths (vacuuming,
blowing),
– for levelling earth mounds, e.g. mole
hills.
6.2 Clothing and equipment
Wear sturdy footwear with high-
grip soles and never work
barefoot or when wearing e.g.
sandals
– when approaching the robotic mower
during operation.
Wear suitable work clothes
during installation, maintenance
operations and all other work on
the machine and docking
station.
Never wear loose clothes which may
become caught on moving parts – do not
wear jewellery, ties or scarves.
In particular, wear long trousers
– when approaching the robotic mower
during operation.
Always wear thick gloves during
maintenance and cleaning
operations, when laying and
removing wires and when
securing the docking station.
In particular, protect the hands when
working on the mowing blade and when
driving in the fixing pins or the docking
station pegs.
Long hair must always be tied up and
secured (headscarf, cap, etc.) when
working on the machine.
Suitable safety glasses must be
worn when driving in the fixing
pins and the docking station
pegs.
Caution - risk of accident!