User Instructions

155
DEFRNLIT EN
0478 131 9944 C - EN
1 Fold open the left clamping lever (1).
2 Remove the left wire end (2) from the
terminal block.
Close the clamping lever (1) again.
3 Fold open the right clamping lever (3).
4 Remove the right wire end (4) from the
terminal block.
Close the clamping lever (3) again.
● Close the panel (Ö 9.2)
● Guide the left and right wire ends out of
the docking station separately from
each other
● Fit the docking station cover (Ö 9.2)
Pull out the pegs (1), remove the docking
station (2) from the lawn with the power
supply unit connected, clean thoroughly
(with a moist cloth) and put into storage.
● Store the robotic mower together with
the docking station and the power
supply unit in the normal position and in
a dry, closed and dust-free room. Dock
the robotic mower in the docking
station. Make sure that the machine is
kept out of the reach of children.
● Protect the terminals of the perimeter
wire from environmental influences
(e.g. wrap with suitable insulating tape).
● Reinstall the docking station in the
same way as during initial installation –
in particular connect the right and left
perimeter wire ends on the correct
sides. (Ö 9.8)
Mowing blade:
6301 702 0101
– STIHL Kit S for mowing areas up to
500 m
2
– STIHL Kit L for mowing areas from
2,000 m
2
– 4,000 m
2
– Fixing pins STIHL AFN 075
– Perimeter wire STIHL ARB 501:
Length: 500 m
Diameter: 3,4 mm
– Wire connectors STIHL ADV 010
– Small-area module STIHL AKM 100
Additional accessories are available for
the machine.
Further information is available from your
STIHL specialist dealer, on the internet
(www.stihl.com) or in the
STIHL catalogue.
Important information on maintenance
and care of the product group
robotic mower, battery powered (STIHL
RMI)
STIHL assumes no liability for material or
personal damage caused by the non-
observance of information contained in the
operating instructions, in particular with
regard to safety, operation and
maintenance, or which arise through the
use of unauthorised attachment or spare
parts.
17. Standard spare parts
18. Accessories
For safety reasons, only
accessories approved by STIHL
may be used with the machine.
19. Minimising wear and
preventing damage