User Instructions

0478 131 9944 C - EN
110
Guide the power cable through the cable
guide (1) on the panel.
● Close the panel. (Ö 9.2)
Press the power cable into the cable
guide (1) as illustrated and guide through
the strain relief (2) and the cable duct (3)
to the power supply unit.
● Close the docking station cover. (Ö 9.2)
9.4 Installation material
If the perimeter wire is not routed by the
specialist dealer, additional installation
material not included in the standard
equipment will be required to be able to
operate the robotic mower. (Ö 18.)
The installation kits contain perimeter wire
on a reel (1) as well as fixing pins (2) and
wire connectors (3). The standard
equipment in the installation kits may
include additional parts not required for the
installation.
9.5 Adjusting the cutting height
Lowest cutting height:
Level 1 (20 mm)
Highest cutting height:
Level 8 (60 mm)
– Open the flap. (Ö 15.2)
Turn the rotary knob (1). The marking (2)
indicates the set cutting height.
9.6 Notes on initial installation
An installation assistant is
available for installation of the
robotic mower. This program
guides you through the entire
initial installation process:
● Setting the language, date and time
● Installing the docking station
● Routing the perimeter wire
● Connecting the perimeter wire
Set the cutting height to at least
level 4 in the first weeks (until the
grass has grown over the perimeter
wire) to prevent the perimeter wire
being damaged and to guarantee
reliable operation.
Levels 1, 2 and 3 are special
heights for very level lawns (ground
unevenness < +/- 1 cm).
The rotary knob can be removed
upwards from the adjustment
element. This design serves a
safety function (it ensures that the
machine cannot be lifted and
carried by the rotary knob) and to
prevent the cutting height from
being modified by unauthorised
persons.