Operation Manual

RMA 510
English
22
Inserting the Battery
N Insert the battery (4) in the battery
compartment and push it until it
engages in position.
Closing the Battery Compartment Cover
N Close the cover (1).
The battery compartment cover must
always be closed during operation.
Starting
Do not start the motor in high grass or in
the lowest setting since this makes
starting more difficult.
N Press in the switch lever lockout (5)
with your right hand and hold it
there.
N Pull the switch lever (6) towards the
handle with your left hand and hold
it until you hear an audible click.
N Release the switch lever
lockout (5).
Releasing the Switch Lever
N To switch off the motor, release the
switch lever (1) – the cutting blade
comes to a standstill after coasting
for a few seconds.
Remove the fuse key and the battery
from the machine during breaks and
after finishing work.
Opening the Battery Compartment
Cover
N Lift the cover (2) up and swing it
forward.
4
0000-GXX-2652-A0
1
0000-GXX-2650-A0
0000-GXX-2653-A0
5
6
Switching Off
0000-GXX-2654-A0
1
2
0000-GXX-2826-A0