Instruction Manual

RMA 510
English
17
Folding the upper handle
N Unscrew the star knobs (4)
counterclockwise.
N Fold the upper handle (5).
N Tighten down the star knobs (4)
clockwise.
Unfolding the Handle
Make sure cables are not pinched when
you unfold the handle.
Unfolding the lower handle
N Rotate the handle knobs (1) 90°.
N Unfold the lower handle (2).
N Line up the handle knobs (1) in one
of the three positions on the
brackets (3).
N Rotate the handle knobs (1) 90° so
that they engage the holes in the
brackets (3).
Make sure that both handle knobs (1)
are in the same position.
Unfolding the upper handle
N Unfold the upper handle (4).
N Tighten down the star knobs (5)
clockwise.
Different cutting heights can be
selected.
Adjusting Cutting Height
To incerase cutting height:
N Pull cutting height adjustment
lever (1) toward rear of mower.
Reduce cutting height:
N Pull cutting height adjustment
lever (1) toward front of mower.
The selected cutting height is shown.
0000-GXX-2643-A0
5
4
4
90°
0000-GXX-2798-A0
1
2
1
90°
0000-GXX-2639-A0
3
1
0000-GXX-2644-A0
4
5
Adjusting Cutting Height
Setting Cutting
height
1 35 mm (1.4 in)
2 43 mm (1.7 in)
352mm(2in)
4 60 mm (2.4 in)
5 71 mm (2.8 in)
679mm(3in)
7 90 mm (3.5 in)
0000-GXX-2646-A0
1