Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 5 Preparing the Lawn Mower for Operation
- 6 Charging the Battery, LEDs
- 7 Assembling the Lawn Mower
- 8 Adjusting Lawn Mower for the User
- 9 Inserting and Removing Activation Key
- 10 Removing and Fitting the Battery
- 11 Switching the Lawn Mower On and Off
- 12 Checking the Lawn Mower and Battery
- 13 Operating the Lawn Mower
- 14 After Finishing Work
- 15 Transporting
- 16 Storing
- 17 Cleaning
- 18 Maintenance
- 19 Repairing
- 20 Troubleshooting
- 21 Specifications
- 22 Spare Parts and Accessories
- 23 Disposal
- 1 Prefácio
- 2 Informações sobre este manual de instruções
- 3 Visão geral
- 4 Indicações de segurança
- 5 Preparar o cortador de grama
- 6 Carregar bateria e LEDs
- 7 Montar o cortador de grama
- 8 Ajustar o cortador de grama para o usuário
- 9 Conectar e desconectar a chave de ativação
- 10 Inserir e tirar a bateria
- 11 Ligar e desligar o cortador de grama
- 12 Verificar o cortador de grama e a bateria
- 13 Trabalhar com o cortador de grama
- 14 Após o trabalho
- 15 Transporte
- 16 Armazenagem
- 17 Limpeza
- 18 Manutenção
- 19 Consertos
- 20 Solucionar distúrbios
- 21 Dados técnicos
- 22 Peças de reposição e acessórios
- 23 Descarte
0458-796-9921-A
15
English
7 Assembling the Lawn Mower
► Open the side discharge flap (1) and hold it in position.
► Swing the chute (2) upwards and lift it away.
► Close the side discharge flap (1).
7.5 Fitting and Removing the Blade
7.5.1 Mounting the Blade
► Switch off the mower, remove the activation key and
battery.
► Stand the mower on end.
► Fit washer (1) on the screw (2).
► Coat screw (2) with Loctite 243 or Loctite 242.
► Fit the blade (3) so that the lugs on the mounting face (4)
engage the recesses in the blade.
► Fit the screw (2) together with the washer (1).
► Use a piece of wood (4) to block the blade (3).
► Tighten down the screw (2) firmly.
7.5.2 Removing the Blade
► Switch off the mower, remove the activation key and
battery.
► Stand the mower on end.
► Use a piece of wood (2) to block the blade (1).
► Take out the screw (3).
► Remove the washer (4).
► Remove the blade (1).
2
1
0000-GXX-4637-A0
3
2
1
0000-GXX-4793-A1
3
4
2
0000-GXX-5562-A0
2
1
3
4
1
0000-GXX-4794-A0