Operation Manual

RMA 410 C
English
21
Fit the battery
N Insert the battery (5) in the battery
compartment and push it home.
Close the battery compartment
N Swing the cover (2) down – the
tab (1) must snap into position.
The battery compartment must always
be closed during operation.
Switching On
Do not start the motor in high grass or in
the lowest setting since this makes
starting more difficult.
N Press in the switch lockout
button (1) with your right hand and
hold it there.
N Pull the switch lever (2) against the
handlebar with your left hand and
hold it there – release the lockout
button.
N To switch off the motor, release the
switch lever (1) – the cutting blade
comes to a standstill after coasting
for a few seconds.
Always remove the battery and fuse key
from the power tool during work breaks
and after finishing work.
Coasting Brake
The coasting brake brings the cutting
blade to a standstill in less than
3 seconds after the switch lever is
released.
0000-GXX-0057-A0 KN
5
2
1
0000-GXX-0058-A0 KN
2
1
0000-GXX-0059-A0 KN
Switching Off
1
0000-GXX-0060-A0 KN