Instruction Manual

Table Of Contents
Hold the lawn mower at transport handle (1)
and upend.
16.2 Cleaning the Lawn Mower
Switch the lawn mower off, pull out the activa‐
tion key and remove the battery.
Clean the lawn mower with a damp cloth.
Remove any foreign bodies from the battery
compartment and clean the battery compart‐
ment with a damp cloth.
Clean the electric contacts in the battery com‐
partment with a paintbrush or a soft brush.
Clean the ventilation slots with a paintbrush.
Upend the lawn mower.
Clean the area around the blade and the blade
with a stick, a soft brush or a damp cloth.
16.3 Cleaning the Battery
Clean the battery with a damp cloth.
17 Maintenance
17.1 Removing and Attaching the
Blade
17.1.1 Removing the Blade
Switch the lawn mower off, pull out the activa‐
tion key and remove the battery.
Upend the lawn mower.
Block blade (1) using a piece of wood (2).
Unscrew screw (3) in the direction of the arrow
and remove together with washer (4).
Remove blade (1).
Discard screw (3) and washer (4).
Use a new screw and washer to attach
blade (1).
17.1.2 Attaching the Blade
Switch the lawn mower off, pull out the activa‐
tion key and remove the battery.
Upend the lawn mower.
Lay new washer (1) on new screw (2) with the
convex side facing outwards.
Apply Loctite 243 thread locker to the thread
of screw (2).
Position blade (3) so that the raised areas on
contact area (4) engage in notches (5).
Screw in screw (2) together with washer (1).
Block blade (1) using a piece of wood (2).
Tighten screw (3) to 65 Nm.
17.2 Sharpening and Balancing the
Blade
Sharpening and balancing the blade correctly
requires a lot of practice.
STIHL recommends having the blade sharpened
and balanced by a STIHL specialist dealer.
WARNING
The cutting edges of the blade are sharp. This
may result in the user cutting themselves.
Wear work gloves made from resistant
material.
Switch the lawn mower off, pull out the activa‐
tion key and remove the battery.
Upend the lawn mower.
English 17 Maintenance
38 0478-131-9950-C