User Manual
Table Of Contents
- 1. Inhaltsverzeichnis
- 2. Zu dieser Gebrauchsanleitung
- 3. Rasenmäher mit Messer- Brems-Kupplung, BBC
- 4. Gerätebeschreibung
- 5. Zu Ihrer Sicherheit
- 6. Symbolbeschreibung
- 7. Lieferumfang
- 8. Gerät betriebsbereit machen
- 9. Bedienelemente
- 10. Sicherheitseinrichtungen
- 11. Messer-Brems-Kupplung (BBC)
- 12. Hinweise zum Arbeiten
- 13. Gerät in Betrieb nehmen
- 13.1 Messer-Brems-Kupplung kontrollieren
- 13.2 Verbrennungsmotor starten (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Verbrennungsmotor starten (RM 650 VE)
- 13.4 Verbrennungsmotor abstellen (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Verbrennungsmotor starten (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Mähmesser einkuppeln (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Mähmesser auskuppeln (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Verbrennungsmotor abstellen (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Fahrantrieb
- 13.10 Grasfangkorb entleeren
- 14. Wartung
- 14.1 Allgemein
- 14.2 Gerät reinigen
- 14.3 Messerverschleiß prüfen
- 14.4 Messer aus- und einbauen
- 14.5 Mähmesser schärfen
- 14.6 Verbrennungsmotor
- 14.7 Akku und Ladegerät warten
- 14.8 Räder und Getriebe
- 14.9 Rasenwalze warten
- 14.10 Messer-Brems-Kupplung (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Seilzug Fahrantrieb einstellen (RM 655 YS)
- 14.12 Verschleiß Scheuerleisten prüfen
- 14.13 Aufbewahrung und Stilllegung (Winterpause)
- 15. Transport
- 16. Umweltschutz
- 17. Verschleiß minimieren und Schäden vermeiden
- 18. Übliche Ersatzteile
- 19. EU- Konformitätserklärung
- 20. Technische Daten
- 21. Fehlersuche
- 22. Serviceplan
- 1. Table of contents
- 2. Notes on the instruction manual
- 3. Lawn mower with blade brake clutch, BBC
- 4. Machine overview
- 5. For your safety
- 6. Description of symbols
- 7. Standard equipment
- 8. Preparing the machine for operation
- 9. Controls
- 10. Safety devices
- 11. Blade brake clutch (BBC)
- 12. Notes on working with the machine
- 13. Operating the machine
- 13.1 Checking the blade brake clutch
- 13.2 Starting the engine (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Starting the engine (RM 650 VE)
- 13.4 Stopping the engine (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Starting the engine (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Engaging the mowing blade (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Disengaging the mowing blade (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Stopping the engine (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Self-propulsion
- 13.10 Emptying the grass catcher box
- 14. Maintenance
- 14.1 General
- 14.2 Cleaning the machine
- 14.3 Checking blade wear
- 14.4 Removing and installing the blade
- 14.5 Sharpening the mowing blade
- 14.6 Engine
- 14.7 Battery and charger maintenance
- 14.8 Wheels and gearbox
- 14.9 Lawn roller maintenance
- 14.10 Blade brake clutch (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Adjusting the self- propulsion cable (RM 655 YS)
- 14.12 Checking skirting protector wear
- 14.13 Storage and periods of inoperation (winter break)
- 15. Transport
- 16. Environmental protection
- 17. Minimising wear and preventing damage
- 18. Standard spare parts
- 19. EU - Declaration of conformity
- 20. Technical specifications
- 21. Troubleshooting
- 22. Service schedule
- 1. Sommaire
- 2. À propos de ce manuel d’utilisation
- 3. Tondeuse avec embrayage/frein de lame, BBC
- 4. Description de l’appareil
- 5. Consignes de sécurité
- 6. Signification des pictogrammes
- 7. Contenu de l’emballage
- 8. Préparation de l’appareil
- 9. Éléments de commande
- 10. Dispositifs de sécurité
- 11. Embrayage/Frein de lame (BBC)
- 12. Conseils d’utilisation
- 13. Mise en service de l’appareil
- 13.1 Contrôle de l’embrayage/frein de lame
- 13.2 Démarrage du moteur à combustion (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Démarrage du moteur à combustion (RM 650 VE)
- 13.4 Arrêt du moteur à combustion (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Démarrage du moteur à combustion (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Embrayage de la lame de coupe (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Débrayage de la lame de coupe (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Arrêt du moteur à combustion (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Entraînement
- 13.10 Vidage du bac de ramassage
- 14. Entretien
- 14.1 Généralités
- 14.2 Nettoyage de l’appareil
- 14.3 Contrôle de l’usure de la lame
- 14.4 Dépose et repose de la lame
- 14.5 Affûtage de la lame de coupe
- 14.6 Moteur à combustion
- 14.7 Entretien de la batterie et du chargeur
- 14.8 Roues et transmission
- 14.9 Entretien du rouleau de jardin
- 14.10 Embrayage/frein de lame (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Réglage du câble de commande d’entraînement (RM 655 YS)
- 14.12 Contrôle de l’usure des renforts latéraux
- 14.13 Rangement et entreposage (hivernage) de l’appareil
- 15. Transport
- 16. Protection de l’environnement
- 17. Comment limiter l’usure et éviter les dommages
- 18. Pièces de rechange courantes
- 19. Déclaration de conformité UE
- 20. Caractéristiques techniques
- 21. Recherche des pannes
- 22. Feuille d’entretien
- 1. Inhoudsopgave
- 2. Over deze gebruiksaanwijzing
- 3. Grasmaaiers met messenremkoppeling, BBC
- 4. Beschrijving van het apparaat
- 5. Voor uw veiligheid
- 6. Toelichting van de symbolen
- 7. Leveringsomvang
- 8. Apparaat klaarmaken voor gebruik
- 9. Bedieningselementen
- 10. Veiligheidsvoorzieningen
- 11. Messenremkoppeling (BBC)
- 12. Aanwijzingen voor werken
- 13. Apparaat in gebruik nemen
- 13.1 Messenremkoppeling controleren
- 13.2 Verbrandingsmotor starten (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Verbrandingsmotor starten (RM 650 VE)
- 13.4 Verbrandingsmotor uitschakelen (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Verbrandingsmotor starten (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Maaimes aankoppelen (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Maaimes loskoppelen (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Verbrandingsmotor uitschakelen (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Wielaandrijving
- 13.10 Grasopvangbox ledigen
- 14. Onderhoud
- 14.1 Algemeen
- 14.2 Apparaat reinigen
- 14.3 Messenslijtage controleren
- 14.4 Mes uit- en inbouwen
- 14.5 Maaimes slijpen
- 14.6 Verbrandingsmotor
- 14.7 Accu en oplaadapparaat onderhouden
- 14.8 Wielen en transmissie
- 14.9 Gazonwals onderhouden
- 14.10 Messenremkoppeling (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Kabel wielaandrijving afstellen (RM 655 YS)
- 14.12 Stootstrips op slijtage controleren
- 14.13 Opslag en stilleggen (winterpauze)
- 15. Transport
- 16. Milieubescherming
- 17. Slijtage minimaliseren en schade voorkomen
- 18. Standaard reserveonderdelen
- 19. EU- conformiteitsverklaring
- 20. Technische gegevens
- 21. Defectopsporing
- 22. Onderhoudsschema
- 1. Indice
- 2. Avvertenze sulle istruzioni per l’uso
- 3. Tosaerba con freno- frizione-lama, BBC
- 4. Descrizione dell’apparecchio
- 5. Per la vostra sicurezza
- 5.1 Informazioni generali
- 5.2 Fare rifornimento - Trattamento della benzina
- 5.3 Accumulatore e dispositivo di carica
- 5.4 Abbigliamento ed equipaggiamento
- 5.5 Trasporto dell'apparecchio
- 5.6 Prima dell'uso
- 5.7 Durante il lavoro
- 5.8 Manutenzione e riparazioni
- 5.9 Rimessaggio durante periodi di non utilizzo prolungati
- 5.10 Smaltimento
- 6. Descrizione dei simboli
- 7. Equipaggiamento fornito
- 8. Preparazione per la messa in servizio dell'apparecchio
- 9. Elementi di comando
- 10. Dispositivi per la sicurezza
- 11. Freno-frizione-lama (BBC)
- 12. Istruzioni di lavoro
- 13. Messa in servizio dell'apparecchio
- 13.1 Controllo del freno-frizione-lama
- 13.2 Avviamento del motore a combustione (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Avviamento del motore a combustione (RM 650 VE)
- 13.4 Spegnimento del motore a combustione (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Avviamento del motore a combustione (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Innesto della lama di taglio (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Disinnesto della lama di taglio (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Spegnimento del motore a combustione (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Trazione
- 13.10 Svuotamento del cesto raccolta erba
- 14. Manutenzione
- 14.1 Informazioni generali
- 14.2 Pulizia dell'apparecchio
- 14.3 Controllo dei limiti di usura della lama
- 14.4 Smontaggio e montaggio della lama
- 14.5 Affilatura della lama
- 14.6 Motore a combustione
- 14.7 Manutenzione dell'accumulatore e del dispositivo di carica
- 14.8 Ruote e cambio
- 14.9 Manutenzione del rullo da prato
- 14.10 Freno-frizione-lama (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Registrazione del cavo di comando trazione (RM 655 YS)
- 14.12 Verifica dell'usura dei parabordi
- 14.13 Rimessaggio e sosta prolungata (pausa invernale)
- 15. Trasporto
- 16. Tutela dell’ambiente
- 17. Minimizzare l’usura ed evitare danni
- 18. Ricambi standard
- 19. Dichiarazione di conformità EU
- 20. Dati tecnici
- 21. Risoluzione guasti
- 22. Programma Assistenza Tecnica
- 1. Índice
- 2. Acerca de este manual de instrucciones
- 3. Cortacéspedes con embrague-freno de cuchilla, BBC
- 4. Descripción del equipo
- 5. Para su seguridad
- 6. Descripción de los símbolos
- 7. Contenido del suministro
- 8. Preparar el equipo para el servicio
- 9. Elementos de mando
- 10. Dispositivos de seguridad
- 11. Embrague-freno de cuchilla (BBC)
- 12. Indicaciones para el trabajo
- 13. Poner el equipo en servicio
- 13.1 Controlar el embrague-freno de cuchilla
- 13.2 Arrancar el motor de combustión (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Arrancar el motor de combustión (RM 650 VE)
- 13.4 Apagar el motor de combustión (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Arrancar el motor de combustión (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Acoplar la cuchilla (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Desacoplar la cuchilla (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Apagar el motor de combustión (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Tracción a las ruedas
- 13.10 Vaciar el recogedor de hierba
- 14. Mantenimiento
- 14.1 Información general
- 14.2 Limpiar el equipo
- 14.3 Comprobar el límite de desgaste de la cuchilla
- 14.4 Desmontar y montar la cuchilla
- 14.5 Afilar la cuchilla
- 14.6 Motor de combustión
- 14.7 Revisar el acumulador y el cargador
- 14.8 Ruedas y caja de cambios
- 14.9 Mantenimiento del rodillo
- 14.10 Embrague-freno de cuchilla (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Ajustar el cable de tracción a las ruedas (RM 655 YS)
- 14.12 Comprobar el desgaste de los guardacantos
- 14.13 Almacenamiento y parada prolongada (pausa invernal)
- 15. Transporte
- 16. Protección del medio ambiente
- 17. Reducir el desgaste y prevenir daños
- 18. Piezas de recambio habituales
- 19. Declaración de conformidad de la UE
- 20. Datos técnicos
- 21. Localización de anomalías
- 22. Plan de mantenimiento
- 1. Índice
- 2. Sobre este manual de utilização
- 3. Cortador de relva com acoplamento embraiagem- lâmina, BBC
- 4. Descrição do aparelho
- 5. Para sua segurança
- 6. Descrição de símbolos
- 7. Fornecimento
- 8. Preparar o aparelho para o funcionamento
- 9. Elementos de comando
- 10. Dispositivos de segurança
- 11. Acoplamento lâmina- embraiagem (BBC)
- 12. Instruções para trabalhar
- 13. Colocar o aparelho em funcionamento
- 13.1 Verificar o acoplamento embraiagem-lâmina
- 13.2 Ligar o motor de combustão (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Ligar o motor de combustão (RM 650 VE)
- 13.4 Desligar o motor de combustão (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Ligar o motor de combustão (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Acoplar a lâmina de corte (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Desacoplar a lâmina de corte (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Desligar o motor de combustão (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Mecanismo de translação
- 13.10 Esvaziar a cesta de recolha de relva
- 14. Manutenção
- 14.1 Generalidades
- 14.2 Limpar o aparelho
- 14.3 Verificar o desgaste da lâmina
- 14.4 Desmontar e montar a lâmina
- 14.5 Afiar a lâmina de corte
- 14.6 Motor de combustão
- 14.7 Manutenção da bateria e carregador
- 14.8 Rodas e transmissão
- 14.9 Manutenção do cilindro de relva
- 14.10 Acoplamento embraiagem- lâmina (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Ajustar o cabo tirante do mecanismo de translação (RM 655 YS)
- 14.12 Verificar o desgaste dos rodapés de proteção
- 14.13 Arrumação e imobilização (período de inverno)
- 15. Transporte
- 16. Proteção do meio ambiente
- 17. Minimização do desgaste e prevenção de danos
- 18. Peças de reposição comuns
- 19. Declaração de conformidade UE
- 20. Dados técnicos
- 21. Localização de falhas
- 22. Plano de manutenção
- 1. Innholdsfortegnelse
- 2. Om denne bruksanvisningen
- 3. Gressklippere med knivclutch (BBC)
- 4. Maskinbeskrivelse
- 5. For din egen sikkerhet
- 6. Symbolforklaring
- 7. Produktkomponenter
- 8. Gjøre maskinen klar for bruk
- 9. Betjeningselementer
- 10. Sikkerhetsutstyr
- 11. Knivclutch (BBC)
- 12. Informasjon om arbeid
- 13. Ta maskinen i bruk
- 13.1 Kontrollere knivclutchen
- 13.2 Starte forbrenningsmotoren (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Starte forbrenningsmotoren (RM 650 VE)
- 13.4 Slå av forbrenningsmotoren (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Starte forbrenningsmotoren (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Koble inn klippekniven (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Koble ut klippekniven (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Slå av forbrenningsmotoren (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Fremdrift
- 13.10 Tømme oppsamleren
- 14. Vedlikehold
- 14.1 Generell informasjon
- 14.2 Rengjøring
- 14.3 Kontrollere knivslitasjen
- 14.4 Demontere og montere kniven
- 14.5 Slipe klippekniven
- 14.6 Forbrenningsmotor
- 14.7 Vedlikeholde batteriet og laderen
- 14.8 Hjul og gir
- 14.9 Vedlikeholde plenvalsen
- 14.10 Knivclutch (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Justere vaieren for fremdrift (RM 655 YS)
- 14.12 Kontrollere slitasje på skrapelistene
- 14.13 Oppbevaring og vinterlagring
- 15. Transport
- 16. Miljøvern
- 17. Minimere slitasjen og unngå skader
- 18. Vanlige reservedeler
- 19. EU-samsvarserklæring
- 20. Tekniske data
- 21. Feilsøking
- 22. Serviceplan
- 1. Innehållsförteckning
- 2. Information om denna bruksanvisning
- 3. Gräsklippare med knivbromskoppling, BBC
- 4. Maskinbeskrivning
- 5. För din säkerhet
- 6. Symbolbeskrivning
- 7. Leveransens omfattning
- 8. Göra maskinen klar för användning
- 9. Reglage
- 10. Säkerhetsanordningar
- 11. Knivbromskoppling (BBC)
- 12. Arbetsanvisningar
- 13. Ta maskinen i bruk
- 13.1 Kontrollera knivbromskoppling
- 13.2 Starta förbränningsmotorn (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Starta förbränningsmotorn (RM 650 VE)
- 13.4 Stänga av förbränningsmotorn (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Starta förbränningsmotorn (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Koppla till kniv (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Koppla från kniv (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Stänga av förbränningsmotorn (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Drivning
- 13.10 Tömma gräsuppsamlare
- 14. Underhåll
- 14.1 Allmänt
- 14.2 Göra rent maskinen
- 14.3 Kontrollera knivslitage
- 14.4 Demontera och montera kniven
- 14.5 Vässa kniv
- 14.6 Förbränningsmotor
- 14.7 Underhåll av batteri och batteriladdare
- 14.8 Hjul och växellåda
- 14.9 Underhåll av vals
- 14.10 Knivbromskoppling (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Ställa in drivningens wire (RM 655 YS)
- 14.12 Kontrollera skyddslisternas slitage
- 14.13 Förvaring och uppställning (vinteruppehåll)
- 15. Transport
- 16. Miljöskydd
- 17. Minimera slitage och förhindra skador
- 18. Vanliga reservdelar
- 19. EU- konformitetsdeklaration
- 20. Tekniska data
- 21. Felsökning
- 22. Serviceschema
- 1. Sisällysluettelo
- 2. Tätä käyttöopasta koskevia tietoja
- 3. Ruohonleikkuri teräjarru/- kytkimellä (BBC)
- 4. Laitekuvaus
- 5. Turvallisuutesi vuoksi
- 6. Kuvasymbolien selitykset
- 7. Toimitussisältö
- 8. Laitteen valmistelu käyttöä varten
- 9. Hallintalaitteet
- 10. Turvalaitteet
- 11. Teräjarru/-kytkin (BBC)
- 12. Työskentelyohjeita
- 13. Laitteen käyttöönotto
- 13.1 Teräjarru/-kytkimen tarkastus
- 13.2 Polttomoottorin käynnistäminen (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Polttomoottorin käynnistys (RM 650 VE)
- 13.4 Polttomoottorin pysäyttäminen (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Polttomoottorin käynnistäminen (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Leikkuuterän päällekytkentä (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Leikkuuterän irtikytkentä (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Polttomoottorin pysäyttäminen (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Veto
- 13.10 Ruohonkeruusäiliön tyhjennys
- 14. Huolto
- 14.1 Yleistä
- 14.2 Laitteen puhdistus
- 14.3 Terän kuluneisuuden tarkistus
- 14.4 Terän irrotus ja kiinnitys
- 14.5 Leikkuuterän teroitus
- 14.6 Polttomoottori
- 14.7 Akun ja latauslaitteen huolto
- 14.8 Pyörät ja vaihteisto
- 14.9 Nurmitelan huolto
- 14.10 Teräjarru/-kytkin (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Vedon kytkentävaijerin säätö (RM 655 YS)
- 14.12 Suojalistojen kuluneisuuden tarkistus
- 14.13 Varastointi ja pitkäaikaissäilytys (talvisäilytys)
- 15. Kuljetus
- 16. Ympäristönsuojelu
- 17. Kulumisen minimointi ja vaurioiden ehkäisy
- 18. Varaosat
- 19. EU- vaatimustenmukaisuusvaku utus
- 20. Tekniset tiedot
- 21. Vianetsintä
- 22. Huolto-ohjelma
- 1. Indholdsfortegnelse
- 2. Om denne betjeningsvejledning
- 3. Plæneklipper med kniv- bremse-kobling, BBC
- 4. Beskrivelse af maskinen
- 5. Sikkerhed
- 6. Symbolforklaring
- 7. Medfølgende dele
- 8. Klargøring af maskinen
- 9. Betjeningsdele
- 10. Sikkerhedsanordninger
- 11. Kniv-bremse-kobling (BBC)
- 12. Arbejdsanvisninger
- 13. Tag maskinen i brug
- 13.1 Kontrollér kniv-bremse-kobling
- 13.2 Start forbrændingsmotoren (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Start forbrændingsmotor (RM 650 VE)
- 13.4 Stands forbrændingsmotor (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Start forbrændingsmotoren (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Kobl kniven ind (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Udkobl kniv (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Stands forbrændingsmotor (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Fremdrift
- 13.10 Tøm græsopsamlingskurv
- 14. Vedligeholdelse
- 14.1 Generelt
- 14.2 Rengør maskinen
- 14.3 Kontrollér knivens slid
- 14.4 Demonter og montér kniv
- 14.5 Slib kniven
- 14.6 Forbrændingsmotor
- 14.7 Vedligehold batteri og ladeapparat
- 14.8 Hjul og gearkasse
- 14.9 Vedligehold plænetromle
- 14.10 Kniv-bremse-kobling (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Indstil kabeltræk til fremdrift (RM 655 YS)
- 14.12 Kontrollér beskyttelseslister:
- 14.13 Opbevaring og længere pauser (vinterpause)
- 15. Transport
- 16. Miljøbeskyttelse
- 17. Sådan minimerer du slid og undgår skader
- 18. Standardreservedele
- 19. EC- overensstemmelseserklærin g
- 20. Tekniske data
- 21. Fejlsøgning
- 22. Serviceplan
- 1. Spis treści
- 2. Uwagi dotyczące instrukcji obsługi
- 3. Kosiarka trawnikowa ze sprzęgłem i hamulcem noża, BBC
- 4. Opis urządzenia
- 5. Zasady bezpiecznej pracy
- 5.1 Informacje ogólne
- 5.2 Tankowanie paliwa – sposób postępowania
- 5.3 Akumulator i ładowarka
- 5.4 Odzież robocza i sprzęt ochronny
- 5.5 Transport urządzenia
- 5.6 Przed rozpoczęciem pracy
- 5.7 Praca z urządzeniem
- 5.8 Konserwacja i naprawy
- 5.9 Przechowywanie urządzenia podczas dłuższych przerw w eksploatacji
- 5.10 Utylizacja
- 6. Objaśnienie symboli
- 7. Wyposażenie standardowe
- 8. Przygotowanie urządzenia do pracy
- 9. Elementy obsługi
- 10. Urządzenia zabezpieczające
- 11. Sprzęgło i hamulec noża (BBC)
- 12. Wskazówki dotyczące wykonywania pracy
- 13. Uruchamianie urządzenia
- 13.1 Sprawdzanie sprzęgła i hamulca noża
- 13.2 Uruchamianie silnika spalinowego (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Uruchamianie silnika spalinowego (RM 650 VE)
- 13.4 Wyłączanie silnika spalinowego (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Uruchamianie silnika spalinowego (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Włączanie sprzęgła noża kosiarki (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Wyłączanie sprzęgła noża kosiarki (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Wyłączanie silnika spalinowego (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Napęd kół
- 13.10 Opróżnianie kosza na trawę
- 14. Konserwacja
- 14.1 Informacje ogólne
- 14.2 Czyszczenie urządzenia
- 14.3 Sprawdzanie zużycia noża
- 14.4 Wymontowanie i zamontowanie noża
- 14.5 Ostrzenie noża kosiarki
- 14.6 Silnik spalinowy
- 14.7 Konserwacja akumulatora i ładowarki
- 14.8 Koła i przekładnia
- 14.9 Obsługa rolki tylnej
- 14.10 Sprzęgło i hamulec noża (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Regulacja cięgna napędu kół (RM 655 YS)
- 14.12 Sprawdzanie zużycia listew ochronnych
- 14.13 Przechowywanie i przestój (przerwa zimowa)
- 15. Transport
- 16. Ochrona środowiska
- 17. Ograniczanie zużycia i zapobieganie uszkodzeniom
- 18. Typowe części zamienne
- 19. Deklaracja zgodności UE
- 20. Dane techniczne
- 21. Wykrywanie usterek
- 22. Plan czynności serwisowych
- 1. Kazalo
- 2. O navodilih za uporabo
- 3. Kosilnica s sklopko za ustavitev noža, BBC
- 4. Opis naprave
- 5. Za vašo varnost
- 6. Opis simbolov
- 7. Obseg dobave
- 8. Priprava naprave na uporabo
- 9. Upravljalni elementi
- 10. Varnostna oprema
- 11. Sklopka za ustavitev noža (BBC)
- 12. Napotki za delo
- 13. Začetek uporabe naprave
- 13.1 Preverjanje sklopke za ustavitev noža
- 13.2 Zagon motorja z notranjim zgorevanjem (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Zagon motorja z notranjim zgorevanjem (RM 650 VE)
- 13.4 Zaustavitev motorja z notranjim zgorevanjem (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Zagon motorja z notranjim zgorevanjem (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Vklop noža (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Izklop noža (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Zaustavitev motorja z notranjim zgorevanjem (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Pogon
- 13.10 Praznjenje košare za travo
- 14. Vzdrževanje
- 14.1 Splošno
- 14.2 Čiščenje naprave
- 14.3 Preverjanje obrabe noža
- 14.4 Odstranjevanje in vgradnja noža
- 14.5 Brušenje noža za košnjo
- 14.6 Motor z notranjim zgorevanjem
- 14.7 Vzdrževanje baterije in polnilnika
- 14.8 Kolesa in menjalnik
- 14.9 Vzdrževanje valja
- 14.10 Sklopka za ustavitev noža (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Nastavitev bovdena pogona (RM 655 YS)
- 14.12 Preverjanje obrabe odbojnih letev
- 14.13 Shranjevanje in daljša neuporaba (zimski premor)
- 15. Transport
- 16. Varovanje okolja
- 17. Zmanjšanje obrabe in preprečevanje okvar
- 18. Običajni nadomestni deli
- 19. EU-izjava o skladnosti
- 20. Tehnični podatki
- 21. Iskanje napak
- 22. Načrt servisiranja
- 1. Obsah
- 2. O tomto návode na obsluhu
- 3. Kosačka na trávu so spojkou a brzdou rezného noža, BBC
- 4. Popis stroja
- 5. Pre vašu bezpečnosť
- 6. Popis symbolov
- 7. Rozsah dodávky
- 8. Príprava stroja na prevádzku
- 9. Ovládacie prvky
- 10. Bezpečnostné zariadenia
- 11. Spojka a brzda rezného noža (BBC)
- 12. Pokyny pre prácu
- 13. Uvedenie stroja do prevádzky
- 13.1 Kontrola spojky a brzdy rezného noža
- 13.2 Štartovanie spaľovacieho motora (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Naštartovanie spaľovacieho motora (RM 650 VE)
- 13.4 Vypnutie spaľovacieho motora (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Štartovanie spaľovacieho motora (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Zapnutie spojky žacieho noža (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Vypnutie spojky žacieho noža (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Vypnutie spaľovacieho motora (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Pohon kolies
- 13.10 Vyprázdnenie zberného koša na trávu
- 14. Údržba
- 14.1 Všeobecne
- 14.2 Čistenie stroja
- 14.3 Kontrola opotrebovania noža
- 14.4 Demontáž a montáž žacieho noža
- 14.5 Brúsenie žacieho noža
- 14.6 Spaľovací motor
- 14.7 Údržba akumulátora a nabíjačky
- 14.8 Kolesá a prevodovka
- 14.9 Údržba záhradného valca
- 14.10 Spojka a brzda rezného noža (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Nastavenie lanka pohonu kolies (RM 655 YS)
- 14.12 Kontrola opotrebovania trecích líšt
- 14.13 Uskladnenie a odstavenie stroja (zimná prestávka)
- 15. Preprava stroja
- 16. Ochrana životného prostredia
- 17. Opatrenia na minimalizovanie opotrebovania a na zabránenie vzniku škôd
- 18. Bežné náhradné diely
- 19. Prehlásenie o zhode výrobcom - EÚ
- 20. Technické údaje
- 21. Hľadanie porúch
- 22. Servisný plán
- 1. İçindekiler
- 2. Kullanım kılavuzu hakkında
- 3. Bıçak-fren-kavramalı çim biçme makinesi, BBC
- 4. Cihazın tarifi
- 5. Güvenliğiniz için
- 6. Sembol açıklamaları
- 7. Teslimat kapsamı
- 8. Cihazın çalışmaya hazır hale getirilmesi
- 9. Kullanma elemanları
- 10. Güvenlik tesisatları
- 11. Bıçak-Fren-Kavraması (BBC)
- 12. Çalışmaya yönelik uyarılar
- 13. Cihazın çalıştırılması
- 13.1 Bıçak-fren-kavrama kontrolü
- 13.2 Benzinli motoru çalıştırma (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Benzinli motoru çalıştırma (RM 650 VE)
- 13.4 Benzinli motoru durdurma (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Benzinli motoru çalıştırma (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Biçme bıçağının bağlanması (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Biçme bıçağını ayırma (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Benzinli motoru durdurma (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Tekerlek tahriki
- 13.10 Çim toplama sepetinin boşaltılması
- 14. Bakım
- 14.1 Genel
- 14.2 Cihazın temizlenmesi
- 14.3 Bıçak aşınması kontrolü
- 14.4 Bıçağın sökülmesi ve takılması
- 14.5 Biçme bıçağının bilenmesi
- 14.6 Yanmalı motor
- 14.7 Akü ve şarj aleti bakımı
- 14.8 Tekerlekler ve şanzıman
- 14.9 Çim ezme silindiri bakımı
- 14.10 Bıçak-fren-kavraması (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Kablo ağı paketli makine ünitesini ayarlayın (RM 655 YS)
- 14.12 Koruyucu çıta aşınma kontrolü
- 14.13 Saklama ve uzun süreli mola (kış molası)
- 15. Nakliye
- 16. Çevre koruma
- 17. Aşınmanın en aza indirgenmesi ve hasar oluşumunun önlenmesi
- 18. Sık kullanılan yedek parçalar
- 19. EU Uygunluk Beyanı
- 20. Teknik veriler
- 21. Hata arama
- 22. Servis planı
0478 111 9953 A - EN
48
Do not leave the battery inside a vehicle
and protect unused batteries against direct
sunlight.
Lithium-ion batteries must be treated with
special care during transport. In particular,
short-circuit protection must be ensured.
Transport the battery either in the original
packaging or in a suitable non-metal
transport container.
5.6 Before operation
Make sure that only persons who are
familiar with the instruction manual are
permitted to use the machine.
Check the fuel system (particularly visible
parts such as e.g. tank, tank cap, hose
connections) before operating the
machine. In the event of any leaks or
damage, do not start the engine – fire
hazard!
Have the machine repaired by a specialist
dealer prior to operation.
Observe the local regulations regarding
permitted operating times for gardening
power tools with combustion engines.
Carefully inspect the complete area on
which the machine is to be used and
remove any stones, sticks, wires, bones
and other foreign objects which could be
thrown up by the machine. Obstacles (e.g.
tree stumps, roots) can be easily
overlooked in long grass.
For this reason, mark all foreign objects
(obstacles) which are hidden in the lawn
and cannot be removed before
commencing work with the machine.
All faulty, worn or damaged parts must be
replaced before using the machine.
Replace any illegible or damaged danger
signs and warnings on the machine. Your
STIHL specialist has a supply of
replacement stickers and all the other
spare parts.
Check secure seating of the spark plug
socket on the spark plug before using the
machine.
The machine must only be used in good
operating condition. Before each use,
check whether:
– The machine is properly assembled.
– The cutting tool and the entire cutting
unit (mowing blade, fastening elements,
mowing deck housing) are in good
condition. In particular check for secure
fastening, damage (notches or cracks)
and wear. (Ö 14.3), (Ö 14.12)
– The mulch insert is in good condition.
– The tank cap is properly attached.
– The tank and fuel-carrying parts as well
as the tank cap are in good condition.
– The safety devices (e.g. motorstop
lever, discharge flap, housing,
handlebar, protective grille) are in good
condition and working properly.
– The blade brake clutch is working
properly. (Ö 13.1)
– The grass catcher box is undamaged
and correctly installed; a damaged
grass catcher box must not be used.
–The battery (RM 650 VE) is not
damaged or deformed.
– The oil closure screw is properly
attached.
Carry out any necessary work or consult a
specialist dealer. STIHL recommends
STIHL specialist dealers.
5.7 During operation
Keep other people out of the
danger area. Never work when
animals or people, particularly
children, are in the danger area.
The switch and safety devices installed in
the machine must not be removed or
bypassed. In particular, never secure the
motorstop lever or blade stop lever to the
handlebar (e.g. by tying it).
Caution – risk of injury!
Never put hands or feet on or
underneath rotating parts.
Never touch the rotating blade.
Always keep away from the discharge
opening.
Always observe the safety distance
provided by the handlebar. The handlebar
must always be installed correctly and
must not be modified. Never operate the
machine with the handlebar folded down.
Never attach any objects to the handlebar
(e.g. work clothing).
Only work during the day or with good
artificial light.
Do not operate the machine in the rain or
during thunder storms, particularly when
there is a risk of lightning strike.
The risk of accidents is higher if the ground
is damp due to increased danger of
slipping.
Particular caution should be exercised
during working in order to prevent slipping.
If possible, avoid using the machine when
the ground is damp.










