User Manual
Table Of Contents
- 1. Inhaltsverzeichnis
- 2. Zu dieser Gebrauchsanleitung
- 3. Rasenmäher mit Messer- Brems-Kupplung, BBC
- 4. Gerätebeschreibung
- 5. Zu Ihrer Sicherheit
- 6. Symbolbeschreibung
- 7. Lieferumfang
- 8. Gerät betriebsbereit machen
- 9. Bedienelemente
- 10. Sicherheitseinrichtungen
- 11. Messer-Brems-Kupplung (BBC)
- 12. Hinweise zum Arbeiten
- 13. Gerät in Betrieb nehmen
- 13.1 Messer-Brems-Kupplung kontrollieren
- 13.2 Verbrennungsmotor starten (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Verbrennungsmotor starten (RM 650 VE)
- 13.4 Verbrennungsmotor abstellen (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Verbrennungsmotor starten (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Mähmesser einkuppeln (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Mähmesser auskuppeln (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Verbrennungsmotor abstellen (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Fahrantrieb
- 13.10 Grasfangkorb entleeren
- 14. Wartung
- 14.1 Allgemein
- 14.2 Gerät reinigen
- 14.3 Messerverschleiß prüfen
- 14.4 Messer aus- und einbauen
- 14.5 Mähmesser schärfen
- 14.6 Verbrennungsmotor
- 14.7 Akku und Ladegerät warten
- 14.8 Räder und Getriebe
- 14.9 Rasenwalze warten
- 14.10 Messer-Brems-Kupplung (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Seilzug Fahrantrieb einstellen (RM 655 YS)
- 14.12 Verschleiß Scheuerleisten prüfen
- 14.13 Aufbewahrung und Stilllegung (Winterpause)
- 15. Transport
- 16. Umweltschutz
- 17. Verschleiß minimieren und Schäden vermeiden
- 18. Übliche Ersatzteile
- 19. EU- Konformitätserklärung
- 20. Technische Daten
- 21. Fehlersuche
- 22. Serviceplan
- 1. Table of contents
- 2. Notes on the instruction manual
- 3. Lawn mower with blade brake clutch, BBC
- 4. Machine overview
- 5. For your safety
- 6. Description of symbols
- 7. Standard equipment
- 8. Preparing the machine for operation
- 9. Controls
- 10. Safety devices
- 11. Blade brake clutch (BBC)
- 12. Notes on working with the machine
- 13. Operating the machine
- 13.1 Checking the blade brake clutch
- 13.2 Starting the engine (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Starting the engine (RM 650 VE)
- 13.4 Stopping the engine (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Starting the engine (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Engaging the mowing blade (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Disengaging the mowing blade (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Stopping the engine (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Self-propulsion
- 13.10 Emptying the grass catcher box
- 14. Maintenance
- 14.1 General
- 14.2 Cleaning the machine
- 14.3 Checking blade wear
- 14.4 Removing and installing the blade
- 14.5 Sharpening the mowing blade
- 14.6 Engine
- 14.7 Battery and charger maintenance
- 14.8 Wheels and gearbox
- 14.9 Lawn roller maintenance
- 14.10 Blade brake clutch (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Adjusting the self- propulsion cable (RM 655 YS)
- 14.12 Checking skirting protector wear
- 14.13 Storage and periods of inoperation (winter break)
- 15. Transport
- 16. Environmental protection
- 17. Minimising wear and preventing damage
- 18. Standard spare parts
- 19. EU - Declaration of conformity
- 20. Technical specifications
- 21. Troubleshooting
- 22. Service schedule
- 1. Sommaire
- 2. À propos de ce manuel d’utilisation
- 3. Tondeuse avec embrayage/frein de lame, BBC
- 4. Description de l’appareil
- 5. Consignes de sécurité
- 6. Signification des pictogrammes
- 7. Contenu de l’emballage
- 8. Préparation de l’appareil
- 9. Éléments de commande
- 10. Dispositifs de sécurité
- 11. Embrayage/Frein de lame (BBC)
- 12. Conseils d’utilisation
- 13. Mise en service de l’appareil
- 13.1 Contrôle de l’embrayage/frein de lame
- 13.2 Démarrage du moteur à combustion (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Démarrage du moteur à combustion (RM 650 VE)
- 13.4 Arrêt du moteur à combustion (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Démarrage du moteur à combustion (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Embrayage de la lame de coupe (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Débrayage de la lame de coupe (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Arrêt du moteur à combustion (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Entraînement
- 13.10 Vidage du bac de ramassage
- 14. Entretien
- 14.1 Généralités
- 14.2 Nettoyage de l’appareil
- 14.3 Contrôle de l’usure de la lame
- 14.4 Dépose et repose de la lame
- 14.5 Affûtage de la lame de coupe
- 14.6 Moteur à combustion
- 14.7 Entretien de la batterie et du chargeur
- 14.8 Roues et transmission
- 14.9 Entretien du rouleau de jardin
- 14.10 Embrayage/frein de lame (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Réglage du câble de commande d’entraînement (RM 655 YS)
- 14.12 Contrôle de l’usure des renforts latéraux
- 14.13 Rangement et entreposage (hivernage) de l’appareil
- 15. Transport
- 16. Protection de l’environnement
- 17. Comment limiter l’usure et éviter les dommages
- 18. Pièces de rechange courantes
- 19. Déclaration de conformité UE
- 20. Caractéristiques techniques
- 21. Recherche des pannes
- 22. Feuille d’entretien
- 1. Inhoudsopgave
- 2. Over deze gebruiksaanwijzing
- 3. Grasmaaiers met messenremkoppeling, BBC
- 4. Beschrijving van het apparaat
- 5. Voor uw veiligheid
- 6. Toelichting van de symbolen
- 7. Leveringsomvang
- 8. Apparaat klaarmaken voor gebruik
- 9. Bedieningselementen
- 10. Veiligheidsvoorzieningen
- 11. Messenremkoppeling (BBC)
- 12. Aanwijzingen voor werken
- 13. Apparaat in gebruik nemen
- 13.1 Messenremkoppeling controleren
- 13.2 Verbrandingsmotor starten (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Verbrandingsmotor starten (RM 650 VE)
- 13.4 Verbrandingsmotor uitschakelen (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Verbrandingsmotor starten (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Maaimes aankoppelen (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Maaimes loskoppelen (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Verbrandingsmotor uitschakelen (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Wielaandrijving
- 13.10 Grasopvangbox ledigen
- 14. Onderhoud
- 14.1 Algemeen
- 14.2 Apparaat reinigen
- 14.3 Messenslijtage controleren
- 14.4 Mes uit- en inbouwen
- 14.5 Maaimes slijpen
- 14.6 Verbrandingsmotor
- 14.7 Accu en oplaadapparaat onderhouden
- 14.8 Wielen en transmissie
- 14.9 Gazonwals onderhouden
- 14.10 Messenremkoppeling (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Kabel wielaandrijving afstellen (RM 655 YS)
- 14.12 Stootstrips op slijtage controleren
- 14.13 Opslag en stilleggen (winterpauze)
- 15. Transport
- 16. Milieubescherming
- 17. Slijtage minimaliseren en schade voorkomen
- 18. Standaard reserveonderdelen
- 19. EU- conformiteitsverklaring
- 20. Technische gegevens
- 21. Defectopsporing
- 22. Onderhoudsschema
- 1. Indice
- 2. Avvertenze sulle istruzioni per l’uso
- 3. Tosaerba con freno- frizione-lama, BBC
- 4. Descrizione dell’apparecchio
- 5. Per la vostra sicurezza
- 5.1 Informazioni generali
- 5.2 Fare rifornimento - Trattamento della benzina
- 5.3 Accumulatore e dispositivo di carica
- 5.4 Abbigliamento ed equipaggiamento
- 5.5 Trasporto dell'apparecchio
- 5.6 Prima dell'uso
- 5.7 Durante il lavoro
- 5.8 Manutenzione e riparazioni
- 5.9 Rimessaggio durante periodi di non utilizzo prolungati
- 5.10 Smaltimento
- 6. Descrizione dei simboli
- 7. Equipaggiamento fornito
- 8. Preparazione per la messa in servizio dell'apparecchio
- 9. Elementi di comando
- 10. Dispositivi per la sicurezza
- 11. Freno-frizione-lama (BBC)
- 12. Istruzioni di lavoro
- 13. Messa in servizio dell'apparecchio
- 13.1 Controllo del freno-frizione-lama
- 13.2 Avviamento del motore a combustione (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Avviamento del motore a combustione (RM 650 VE)
- 13.4 Spegnimento del motore a combustione (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Avviamento del motore a combustione (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Innesto della lama di taglio (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Disinnesto della lama di taglio (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Spegnimento del motore a combustione (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Trazione
- 13.10 Svuotamento del cesto raccolta erba
- 14. Manutenzione
- 14.1 Informazioni generali
- 14.2 Pulizia dell'apparecchio
- 14.3 Controllo dei limiti di usura della lama
- 14.4 Smontaggio e montaggio della lama
- 14.5 Affilatura della lama
- 14.6 Motore a combustione
- 14.7 Manutenzione dell'accumulatore e del dispositivo di carica
- 14.8 Ruote e cambio
- 14.9 Manutenzione del rullo da prato
- 14.10 Freno-frizione-lama (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Registrazione del cavo di comando trazione (RM 655 YS)
- 14.12 Verifica dell'usura dei parabordi
- 14.13 Rimessaggio e sosta prolungata (pausa invernale)
- 15. Trasporto
- 16. Tutela dell’ambiente
- 17. Minimizzare l’usura ed evitare danni
- 18. Ricambi standard
- 19. Dichiarazione di conformità EU
- 20. Dati tecnici
- 21. Risoluzione guasti
- 22. Programma Assistenza Tecnica
- 1. Índice
- 2. Acerca de este manual de instrucciones
- 3. Cortacéspedes con embrague-freno de cuchilla, BBC
- 4. Descripción del equipo
- 5. Para su seguridad
- 6. Descripción de los símbolos
- 7. Contenido del suministro
- 8. Preparar el equipo para el servicio
- 9. Elementos de mando
- 10. Dispositivos de seguridad
- 11. Embrague-freno de cuchilla (BBC)
- 12. Indicaciones para el trabajo
- 13. Poner el equipo en servicio
- 13.1 Controlar el embrague-freno de cuchilla
- 13.2 Arrancar el motor de combustión (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Arrancar el motor de combustión (RM 650 VE)
- 13.4 Apagar el motor de combustión (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Arrancar el motor de combustión (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Acoplar la cuchilla (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Desacoplar la cuchilla (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Apagar el motor de combustión (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Tracción a las ruedas
- 13.10 Vaciar el recogedor de hierba
- 14. Mantenimiento
- 14.1 Información general
- 14.2 Limpiar el equipo
- 14.3 Comprobar el límite de desgaste de la cuchilla
- 14.4 Desmontar y montar la cuchilla
- 14.5 Afilar la cuchilla
- 14.6 Motor de combustión
- 14.7 Revisar el acumulador y el cargador
- 14.8 Ruedas y caja de cambios
- 14.9 Mantenimiento del rodillo
- 14.10 Embrague-freno de cuchilla (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Ajustar el cable de tracción a las ruedas (RM 655 YS)
- 14.12 Comprobar el desgaste de los guardacantos
- 14.13 Almacenamiento y parada prolongada (pausa invernal)
- 15. Transporte
- 16. Protección del medio ambiente
- 17. Reducir el desgaste y prevenir daños
- 18. Piezas de recambio habituales
- 19. Declaración de conformidad de la UE
- 20. Datos técnicos
- 21. Localización de anomalías
- 22. Plan de mantenimiento
- 1. Índice
- 2. Sobre este manual de utilização
- 3. Cortador de relva com acoplamento embraiagem- lâmina, BBC
- 4. Descrição do aparelho
- 5. Para sua segurança
- 6. Descrição de símbolos
- 7. Fornecimento
- 8. Preparar o aparelho para o funcionamento
- 9. Elementos de comando
- 10. Dispositivos de segurança
- 11. Acoplamento lâmina- embraiagem (BBC)
- 12. Instruções para trabalhar
- 13. Colocar o aparelho em funcionamento
- 13.1 Verificar o acoplamento embraiagem-lâmina
- 13.2 Ligar o motor de combustão (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Ligar o motor de combustão (RM 650 VE)
- 13.4 Desligar o motor de combustão (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Ligar o motor de combustão (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Acoplar a lâmina de corte (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Desacoplar a lâmina de corte (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Desligar o motor de combustão (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Mecanismo de translação
- 13.10 Esvaziar a cesta de recolha de relva
- 14. Manutenção
- 14.1 Generalidades
- 14.2 Limpar o aparelho
- 14.3 Verificar o desgaste da lâmina
- 14.4 Desmontar e montar a lâmina
- 14.5 Afiar a lâmina de corte
- 14.6 Motor de combustão
- 14.7 Manutenção da bateria e carregador
- 14.8 Rodas e transmissão
- 14.9 Manutenção do cilindro de relva
- 14.10 Acoplamento embraiagem- lâmina (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Ajustar o cabo tirante do mecanismo de translação (RM 655 YS)
- 14.12 Verificar o desgaste dos rodapés de proteção
- 14.13 Arrumação e imobilização (período de inverno)
- 15. Transporte
- 16. Proteção do meio ambiente
- 17. Minimização do desgaste e prevenção de danos
- 18. Peças de reposição comuns
- 19. Declaração de conformidade UE
- 20. Dados técnicos
- 21. Localização de falhas
- 22. Plano de manutenção
- 1. Innholdsfortegnelse
- 2. Om denne bruksanvisningen
- 3. Gressklippere med knivclutch (BBC)
- 4. Maskinbeskrivelse
- 5. For din egen sikkerhet
- 6. Symbolforklaring
- 7. Produktkomponenter
- 8. Gjøre maskinen klar for bruk
- 9. Betjeningselementer
- 10. Sikkerhetsutstyr
- 11. Knivclutch (BBC)
- 12. Informasjon om arbeid
- 13. Ta maskinen i bruk
- 13.1 Kontrollere knivclutchen
- 13.2 Starte forbrenningsmotoren (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Starte forbrenningsmotoren (RM 650 VE)
- 13.4 Slå av forbrenningsmotoren (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Starte forbrenningsmotoren (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Koble inn klippekniven (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Koble ut klippekniven (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Slå av forbrenningsmotoren (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Fremdrift
- 13.10 Tømme oppsamleren
- 14. Vedlikehold
- 14.1 Generell informasjon
- 14.2 Rengjøring
- 14.3 Kontrollere knivslitasjen
- 14.4 Demontere og montere kniven
- 14.5 Slipe klippekniven
- 14.6 Forbrenningsmotor
- 14.7 Vedlikeholde batteriet og laderen
- 14.8 Hjul og gir
- 14.9 Vedlikeholde plenvalsen
- 14.10 Knivclutch (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Justere vaieren for fremdrift (RM 655 YS)
- 14.12 Kontrollere slitasje på skrapelistene
- 14.13 Oppbevaring og vinterlagring
- 15. Transport
- 16. Miljøvern
- 17. Minimere slitasjen og unngå skader
- 18. Vanlige reservedeler
- 19. EU-samsvarserklæring
- 20. Tekniske data
- 21. Feilsøking
- 22. Serviceplan
- 1. Innehållsförteckning
- 2. Information om denna bruksanvisning
- 3. Gräsklippare med knivbromskoppling, BBC
- 4. Maskinbeskrivning
- 5. För din säkerhet
- 6. Symbolbeskrivning
- 7. Leveransens omfattning
- 8. Göra maskinen klar för användning
- 9. Reglage
- 10. Säkerhetsanordningar
- 11. Knivbromskoppling (BBC)
- 12. Arbetsanvisningar
- 13. Ta maskinen i bruk
- 13.1 Kontrollera knivbromskoppling
- 13.2 Starta förbränningsmotorn (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Starta förbränningsmotorn (RM 650 VE)
- 13.4 Stänga av förbränningsmotorn (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Starta förbränningsmotorn (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Koppla till kniv (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Koppla från kniv (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Stänga av förbränningsmotorn (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Drivning
- 13.10 Tömma gräsuppsamlare
- 14. Underhåll
- 14.1 Allmänt
- 14.2 Göra rent maskinen
- 14.3 Kontrollera knivslitage
- 14.4 Demontera och montera kniven
- 14.5 Vässa kniv
- 14.6 Förbränningsmotor
- 14.7 Underhåll av batteri och batteriladdare
- 14.8 Hjul och växellåda
- 14.9 Underhåll av vals
- 14.10 Knivbromskoppling (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Ställa in drivningens wire (RM 655 YS)
- 14.12 Kontrollera skyddslisternas slitage
- 14.13 Förvaring och uppställning (vinteruppehåll)
- 15. Transport
- 16. Miljöskydd
- 17. Minimera slitage och förhindra skador
- 18. Vanliga reservdelar
- 19. EU- konformitetsdeklaration
- 20. Tekniska data
- 21. Felsökning
- 22. Serviceschema
- 1. Sisällysluettelo
- 2. Tätä käyttöopasta koskevia tietoja
- 3. Ruohonleikkuri teräjarru/- kytkimellä (BBC)
- 4. Laitekuvaus
- 5. Turvallisuutesi vuoksi
- 6. Kuvasymbolien selitykset
- 7. Toimitussisältö
- 8. Laitteen valmistelu käyttöä varten
- 9. Hallintalaitteet
- 10. Turvalaitteet
- 11. Teräjarru/-kytkin (BBC)
- 12. Työskentelyohjeita
- 13. Laitteen käyttöönotto
- 13.1 Teräjarru/-kytkimen tarkastus
- 13.2 Polttomoottorin käynnistäminen (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Polttomoottorin käynnistys (RM 650 VE)
- 13.4 Polttomoottorin pysäyttäminen (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Polttomoottorin käynnistäminen (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Leikkuuterän päällekytkentä (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Leikkuuterän irtikytkentä (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Polttomoottorin pysäyttäminen (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Veto
- 13.10 Ruohonkeruusäiliön tyhjennys
- 14. Huolto
- 14.1 Yleistä
- 14.2 Laitteen puhdistus
- 14.3 Terän kuluneisuuden tarkistus
- 14.4 Terän irrotus ja kiinnitys
- 14.5 Leikkuuterän teroitus
- 14.6 Polttomoottori
- 14.7 Akun ja latauslaitteen huolto
- 14.8 Pyörät ja vaihteisto
- 14.9 Nurmitelan huolto
- 14.10 Teräjarru/-kytkin (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Vedon kytkentävaijerin säätö (RM 655 YS)
- 14.12 Suojalistojen kuluneisuuden tarkistus
- 14.13 Varastointi ja pitkäaikaissäilytys (talvisäilytys)
- 15. Kuljetus
- 16. Ympäristönsuojelu
- 17. Kulumisen minimointi ja vaurioiden ehkäisy
- 18. Varaosat
- 19. EU- vaatimustenmukaisuusvaku utus
- 20. Tekniset tiedot
- 21. Vianetsintä
- 22. Huolto-ohjelma
- 1. Indholdsfortegnelse
- 2. Om denne betjeningsvejledning
- 3. Plæneklipper med kniv- bremse-kobling, BBC
- 4. Beskrivelse af maskinen
- 5. Sikkerhed
- 6. Symbolforklaring
- 7. Medfølgende dele
- 8. Klargøring af maskinen
- 9. Betjeningsdele
- 10. Sikkerhedsanordninger
- 11. Kniv-bremse-kobling (BBC)
- 12. Arbejdsanvisninger
- 13. Tag maskinen i brug
- 13.1 Kontrollér kniv-bremse-kobling
- 13.2 Start forbrændingsmotoren (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Start forbrændingsmotor (RM 650 VE)
- 13.4 Stands forbrændingsmotor (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Start forbrændingsmotoren (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Kobl kniven ind (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Udkobl kniv (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Stands forbrændingsmotor (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Fremdrift
- 13.10 Tøm græsopsamlingskurv
- 14. Vedligeholdelse
- 14.1 Generelt
- 14.2 Rengør maskinen
- 14.3 Kontrollér knivens slid
- 14.4 Demonter og montér kniv
- 14.5 Slib kniven
- 14.6 Forbrændingsmotor
- 14.7 Vedligehold batteri og ladeapparat
- 14.8 Hjul og gearkasse
- 14.9 Vedligehold plænetromle
- 14.10 Kniv-bremse-kobling (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Indstil kabeltræk til fremdrift (RM 655 YS)
- 14.12 Kontrollér beskyttelseslister:
- 14.13 Opbevaring og længere pauser (vinterpause)
- 15. Transport
- 16. Miljøbeskyttelse
- 17. Sådan minimerer du slid og undgår skader
- 18. Standardreservedele
- 19. EC- overensstemmelseserklærin g
- 20. Tekniske data
- 21. Fejlsøgning
- 22. Serviceplan
- 1. Spis treści
- 2. Uwagi dotyczące instrukcji obsługi
- 3. Kosiarka trawnikowa ze sprzęgłem i hamulcem noża, BBC
- 4. Opis urządzenia
- 5. Zasady bezpiecznej pracy
- 5.1 Informacje ogólne
- 5.2 Tankowanie paliwa – sposób postępowania
- 5.3 Akumulator i ładowarka
- 5.4 Odzież robocza i sprzęt ochronny
- 5.5 Transport urządzenia
- 5.6 Przed rozpoczęciem pracy
- 5.7 Praca z urządzeniem
- 5.8 Konserwacja i naprawy
- 5.9 Przechowywanie urządzenia podczas dłuższych przerw w eksploatacji
- 5.10 Utylizacja
- 6. Objaśnienie symboli
- 7. Wyposażenie standardowe
- 8. Przygotowanie urządzenia do pracy
- 9. Elementy obsługi
- 10. Urządzenia zabezpieczające
- 11. Sprzęgło i hamulec noża (BBC)
- 12. Wskazówki dotyczące wykonywania pracy
- 13. Uruchamianie urządzenia
- 13.1 Sprawdzanie sprzęgła i hamulca noża
- 13.2 Uruchamianie silnika spalinowego (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Uruchamianie silnika spalinowego (RM 650 VE)
- 13.4 Wyłączanie silnika spalinowego (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Uruchamianie silnika spalinowego (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Włączanie sprzęgła noża kosiarki (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Wyłączanie sprzęgła noża kosiarki (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Wyłączanie silnika spalinowego (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Napęd kół
- 13.10 Opróżnianie kosza na trawę
- 14. Konserwacja
- 14.1 Informacje ogólne
- 14.2 Czyszczenie urządzenia
- 14.3 Sprawdzanie zużycia noża
- 14.4 Wymontowanie i zamontowanie noża
- 14.5 Ostrzenie noża kosiarki
- 14.6 Silnik spalinowy
- 14.7 Konserwacja akumulatora i ładowarki
- 14.8 Koła i przekładnia
- 14.9 Obsługa rolki tylnej
- 14.10 Sprzęgło i hamulec noża (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Regulacja cięgna napędu kół (RM 655 YS)
- 14.12 Sprawdzanie zużycia listew ochronnych
- 14.13 Przechowywanie i przestój (przerwa zimowa)
- 15. Transport
- 16. Ochrona środowiska
- 17. Ograniczanie zużycia i zapobieganie uszkodzeniom
- 18. Typowe części zamienne
- 19. Deklaracja zgodności UE
- 20. Dane techniczne
- 21. Wykrywanie usterek
- 22. Plan czynności serwisowych
- 1. Kazalo
- 2. O navodilih za uporabo
- 3. Kosilnica s sklopko za ustavitev noža, BBC
- 4. Opis naprave
- 5. Za vašo varnost
- 6. Opis simbolov
- 7. Obseg dobave
- 8. Priprava naprave na uporabo
- 9. Upravljalni elementi
- 10. Varnostna oprema
- 11. Sklopka za ustavitev noža (BBC)
- 12. Napotki za delo
- 13. Začetek uporabe naprave
- 13.1 Preverjanje sklopke za ustavitev noža
- 13.2 Zagon motorja z notranjim zgorevanjem (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Zagon motorja z notranjim zgorevanjem (RM 650 VE)
- 13.4 Zaustavitev motorja z notranjim zgorevanjem (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Zagon motorja z notranjim zgorevanjem (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Vklop noža (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Izklop noža (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Zaustavitev motorja z notranjim zgorevanjem (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Pogon
- 13.10 Praznjenje košare za travo
- 14. Vzdrževanje
- 14.1 Splošno
- 14.2 Čiščenje naprave
- 14.3 Preverjanje obrabe noža
- 14.4 Odstranjevanje in vgradnja noža
- 14.5 Brušenje noža za košnjo
- 14.6 Motor z notranjim zgorevanjem
- 14.7 Vzdrževanje baterije in polnilnika
- 14.8 Kolesa in menjalnik
- 14.9 Vzdrževanje valja
- 14.10 Sklopka za ustavitev noža (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Nastavitev bovdena pogona (RM 655 YS)
- 14.12 Preverjanje obrabe odbojnih letev
- 14.13 Shranjevanje in daljša neuporaba (zimski premor)
- 15. Transport
- 16. Varovanje okolja
- 17. Zmanjšanje obrabe in preprečevanje okvar
- 18. Običajni nadomestni deli
- 19. EU-izjava o skladnosti
- 20. Tehnični podatki
- 21. Iskanje napak
- 22. Načrt servisiranja
- 1. Obsah
- 2. O tomto návode na obsluhu
- 3. Kosačka na trávu so spojkou a brzdou rezného noža, BBC
- 4. Popis stroja
- 5. Pre vašu bezpečnosť
- 6. Popis symbolov
- 7. Rozsah dodávky
- 8. Príprava stroja na prevádzku
- 9. Ovládacie prvky
- 10. Bezpečnostné zariadenia
- 11. Spojka a brzda rezného noža (BBC)
- 12. Pokyny pre prácu
- 13. Uvedenie stroja do prevádzky
- 13.1 Kontrola spojky a brzdy rezného noža
- 13.2 Štartovanie spaľovacieho motora (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Naštartovanie spaľovacieho motora (RM 650 VE)
- 13.4 Vypnutie spaľovacieho motora (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Štartovanie spaľovacieho motora (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Zapnutie spojky žacieho noža (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Vypnutie spojky žacieho noža (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Vypnutie spaľovacieho motora (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Pohon kolies
- 13.10 Vyprázdnenie zberného koša na trávu
- 14. Údržba
- 14.1 Všeobecne
- 14.2 Čistenie stroja
- 14.3 Kontrola opotrebovania noža
- 14.4 Demontáž a montáž žacieho noža
- 14.5 Brúsenie žacieho noža
- 14.6 Spaľovací motor
- 14.7 Údržba akumulátora a nabíjačky
- 14.8 Kolesá a prevodovka
- 14.9 Údržba záhradného valca
- 14.10 Spojka a brzda rezného noža (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Nastavenie lanka pohonu kolies (RM 655 YS)
- 14.12 Kontrola opotrebovania trecích líšt
- 14.13 Uskladnenie a odstavenie stroja (zimná prestávka)
- 15. Preprava stroja
- 16. Ochrana životného prostredia
- 17. Opatrenia na minimalizovanie opotrebovania a na zabránenie vzniku škôd
- 18. Bežné náhradné diely
- 19. Prehlásenie o zhode výrobcom - EÚ
- 20. Technické údaje
- 21. Hľadanie porúch
- 22. Servisný plán
- 1. İçindekiler
- 2. Kullanım kılavuzu hakkında
- 3. Bıçak-fren-kavramalı çim biçme makinesi, BBC
- 4. Cihazın tarifi
- 5. Güvenliğiniz için
- 6. Sembol açıklamaları
- 7. Teslimat kapsamı
- 8. Cihazın çalışmaya hazır hale getirilmesi
- 9. Kullanma elemanları
- 10. Güvenlik tesisatları
- 11. Bıçak-Fren-Kavraması (BBC)
- 12. Çalışmaya yönelik uyarılar
- 13. Cihazın çalıştırılması
- 13.1 Bıçak-fren-kavrama kontrolü
- 13.2 Benzinli motoru çalıştırma (RM 650 T, RM 650 V, RM 655 V)
- 13.3 Benzinli motoru çalıştırma (RM 650 VE)
- 13.4 Benzinli motoru durdurma (RM 650 T, RM 650 V, RM 650 VE, RM 655 V)
- 13.5 Benzinli motoru çalıştırma (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.6 Biçme bıçağının bağlanması (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.7 Biçme bıçağını ayırma (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.8 Benzinli motoru durdurma (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 13.9 Tekerlek tahriki
- 13.10 Çim toplama sepetinin boşaltılması
- 14. Bakım
- 14.1 Genel
- 14.2 Cihazın temizlenmesi
- 14.3 Bıçak aşınması kontrolü
- 14.4 Bıçağın sökülmesi ve takılması
- 14.5 Biçme bıçağının bilenmesi
- 14.6 Yanmalı motor
- 14.7 Akü ve şarj aleti bakımı
- 14.8 Tekerlekler ve şanzıman
- 14.9 Çim ezme silindiri bakımı
- 14.10 Bıçak-fren-kavraması (RM 650 VS, RM 655 RS, RM 655 VS, RM 655 YS)
- 14.11 Kablo ağı paketli makine ünitesini ayarlayın (RM 655 YS)
- 14.12 Koruyucu çıta aşınma kontrolü
- 14.13 Saklama ve uzun süreli mola (kış molası)
- 15. Nakliye
- 16. Çevre koruma
- 17. Aşınmanın en aza indirgenmesi ve hasar oluşumunun önlenmesi
- 18. Sık kullanılan yedek parçalar
- 19. EU Uygunluk Beyanı
- 20. Teknik veriler
- 21. Hata arama
- 22. Servis planı
139
DEENFRNLESPTNOSVFIDAPLSLSKTR IT
0478 111 9953 A - IT
Attenersi alle prescrizioni locali relative
agli orari di funzionamento consentiti per le
attrezzature da giardino con motore a
combustione.
Controllare sempre tutto il terreno su cui
verrà impiegato l’apparecchio e rimuovere
pietre, bastoni, fili metallici, ossa o altri
corpi estranei che potrebbero essere
aspirati ed espulsi dall'apparecchio. L’erba
alta occulta facilmente eventuali ostacoli
(p.es. ceppi, radici).
Contrassegnare pertanto prima di
eseguire il lavoro con l'apparecchio tutti i
corpi estranei (ostacoli) sulla superficie del
prato che non possono essere rimossi.
Prima dell'utilizzo dell'apparecchio
sostituire tutti componenti danneggiati,
usurati e difettosi. Sostituire le etichette di
avvertenza e di pericolo illeggibili o
danneggiate applicate sull'apparecchio. Il
rivenditore specializzato STIHL sarà lieto
di fornire etichette sostitutive e ogni altro
ricambio necessario.
Prima dell'utilizzo dell'apparecchio,
controllare che il cappuccio della candela
di accensione sia montato in modo saldo e
sicuro sulla candela di accensione.
Usare l'apparecchio solo se è in perfetto
stato di funzionamento. Prima di ogni
messa in funzione controllare
– se l'apparecchio è stato assemblato in
base alle istruzioni riportate nel
manuale.
– se l'attrezzo di taglio e l'intera unità di
taglio (lama di taglio, elementi di
fissaggio, scocca apparato di taglio)
sono in perfetto stato. In particolare
controllare il montaggio saldo e sicuro
in sede, la presenza di eventuali danni
(tacche o fessurazioni) e l'eventuale
usura. (Ö 14.3), (Ö 14.12)
– se l'inserto mulching è in perfetto stato.
– se il tappo del serbatoio è avvitato
correttamente.
– se il serbatoio e i condotti del
carburante nonché il coperchio del
serbatoio sono in perfette condizioni.
– se i dispositivi di sicurezza (p. es. staffa
di arresto motore, sportello-deflettore,
scocca, manubrio, griglia di protezione)
sono in perfetto stato e funzionano
correttamente.
– se il freno-frizione-lama funziona
correttamente. (Ö 13.1)
– se il cesto di raccolta erba non è
danneggiato e se è perfettamente
montato. Non è consentito usare un
cesto di raccolta erba danneggiato.
–se l'accumulatore (RM 650 VE) non è
danneggiato e non è deformato.
– se il tappo di chiusura olio è avvitato
correttamente.
Se necessario, eseguire tutti i lavori
richiesti o rivolgersi a un rivenditore
specializzato. STIHL consiglia di rivolgersi
a un rivenditore specializzato STIHL.
5.7 Durante il lavoro
Tenere lontano persone
estranee dalla zona di pericolo.
Non lavorare mai se nella zona
di pericolo si trovano persone,
soprattutto bambini, o animali.
I dispositivi di inserimento e di sicurezza
montati sull'apparecchio non vanno
staccati né ponticellati. In particolare, non
fissare mai la staffa di arresto motore o la
staffa di arresto lama alla stegola (p. es.
legandola).
Attenzione – Pericolo di
lesioni!
Non mettere mai le mani o i
piedi vicino o sopra le parti in
movimento. Non toccare mai la lama in
movimento. Mantenere sempre una certa
distanza dall'apertura di scarico.
Mantenere sempre la distanza di
sicurezza data dal manubrio. Il manubrio
deve essere sempre montato
correttamente e non può essere
modificato. Non mettere mai in funzione
l'attrezzo con il manubrio chiuso.
Non attaccare mai oggetti al manubrio
(p. es. indumenti da lavoro).
Lavorare solo alla luce del giorno o con
una buona illuminazione.
Non utilizzare l’apparecchio in caso di
pioggia, temporali e, in particolare, in caso
di pericolo di fulmini!
Se il suolo è umido aumenta il pericolo di
infortuni a causa della ridotta stabilità.
Muoversi con particolare cautela per
evitare di scivolare. Se possibile, evitare di
utilizzare l'apparecchio su un terreno
umido.
Gas di scarico:
Pericolo di morte per
avvelenamento!
In caso di nausea, mal di testa,
disturbi alla vista (p. es. il campo
visivo si restringe), disturbi all’udito,
vertigini, diminuzione delle capacità
di concentrazione, interrompere
immediatamente il lavoro. Tali
sintomi possono essere inoltre
causati anche da una
concentrazione troppo elevata dei
gas di scarico.










