User Instructions

ENSK
27
TRHUSRHRCSLVLTROELBGETAZKK
0478 111 9841 B - EN
1. Wearing parts
Some parts of the STIHL machine are
subject to normal wear even when used
properly and must be replaced in due time
depending on type and duration of use.
These include:
– Mowing blades
– Grass catcher box
– V-belt (RM 443 T, RM 448 PC,
RM 448 PT, RM 448 T, RM 448 TC,
RM 448 TX, RM 448 VC)
2. Compliance with the information in
this instruction manual
The STIHL machine must be used,
maintained and stored with the care
described in this instruction manual. Any
damage caused by non-compliance with
the safety, operating and maintenance
instructions is the sole responsibility of the
user.
This applies in particular to:
– Product modifications not approved by
STIHL.
– Use of fuel and lubricants not approved
by STIHL (lubricants, petrol and engine
oil, see engine manufacturer's
specifications).
– The use of tools or accessories which
are not approved or suitable for the
machine, or are of inferior quality.
– Improper use of the product.
– Use of the product for sporting or
competitive events.
– Resultant damage due to continued use
of the product with defective
components.
3. Maintenance operations
All operations listed in the section
"Maintenance" must be performed
regularly.
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
STIHL recommends that you have
maintenance operations and repairs
performed exclusively by a STIHL
specialist dealer.
STIHL specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– Corrosive and other resultant damage
caused by incorrect storage.
– Damage to the machine through the
use of inferior-quality spare parts.
– Damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.
Mowing blade RM 443, RM 443 T:
6338 702 0100
Mowing blade RM 448 PC, RM 448 PT,
RM 448 T, RM 448 TC, RM 448 TX,
RM 448 VC:
6358 702 0100
Blade fastening screw:
9008 319 9028
Retaining washer:
0000 702 6600
17.1 STIHL
RM 443.0,RM 443.0 T,RM 448.0 PC,RM
448.0 PT,RM 448.0 T,RM 448.0 TC,RM 4
48.0 TX,RM 448.0 VC Lawn Mower
STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
declares under our sole responsibility that
– design: lawn mower
– manufacturer's brand: STIHL
– type: RM 443.0, RM 443.0 T,
RM 448.0 PC, RM 448.0 PT,
RM 448.0 T, RM 448.0 TC,
RM 448.0 TX, RM 448.0 VC
– serial number:
RM 443.0, RM 443.0 T: 6338
RM 448.0 PC, RM 448.0 PT,
RM 448.0 T, RM 448.0 TC,
RM 448.0 TX, RM 448.0 VC: 6358
16. Standard spare parts
The fastening elements for the
mowing blade (e.g. blade fastening
screw) must be replaced when
replacing the blade, i.e. when
installing the blade. Spare parts are
available from a STIHL specialist
dealer.
17. EU - Declaration of
conformity