Instruction Manual

Table Of Contents
Turn fuel tank cap (1) anti-clockwise until it
can be removed.
Remove the fuel tank cap.
Add fuel using a suitable funnel, stopping at
least 15 mm short of the fuel tank brim.
Place the fuel tank cap on the fuel tank.
Turn the fuel tank cap clockwise and tighten
firmly by hand.
The fuel tank is sealed.
8 Adjusting the Lawn Mower
for the User
8.1 Folding Up and Adjusting the
Handlebar
Stop the engine.
Detach the spark plug socket.
Place the lawn mower on a level surface.
Loosen quick-clamping devices (1) on the left
and right.
Fold up handlebar (2), ensuring that cables (3)
are not trapped.
Tighten quick-clamping devices (1) on the left
and right.
Handlebar (2) is firmly attached to the lawn
mower.
Press control bar for mowing (4) to handle‐
bar (2) and hold.
Slowly pull starter handle (5) in the direction of
starter rope guide (6).
Hook starter handle (5) into starter rope
guide (6).
Release control bar for mowing (4).
Re-attach the spark plug socket.
Loosen nuts (7 + 8).
Adjust the handlebar by moving it upwards or
downwards and hold it in position.
Tighten nuts (7 + 8).
The handlebar is firmly attached to the lawn
mower.
8.2 Folding the Handlebar
The handlebar can be folded for space-saving
transport or storage.
Stop the engine.
Detach the spark plug socket.
Place the lawn mower on a level surface.
Press the control bar for mowing to the han‐
dlebar and hold.
Detach the starter handle from the starter rope
guide and slowly guide back towards the
engine.
Release the control bar for mowing.
Hold the handlebar and loosen the nuts of the
handlebar screw fastenings.
Fold down the handlebar forwards.
8 Adjusting the Lawn Mower for the User English
0478-111-9656-A 27