Instruction Manual

41
DEFRNLITESPTNOSVFIDAPLSKHUSR EN
0478 111 9944 B - EN
The cooling ribs must always be kept clean
to ensure that the engine is adequately
cooled.
12.6 Wheels and gearbox
The wheel bearings are maintenance-free.
The gearbox is maintenance-free.
12.7 Storage (winter break)
Note the following points when storing the
machine for long periods (winter break):
● Clean all external parts of the machine
with care.
● Thoroughly lubricate/grease all moving
parts.
● Empty the fuel tank and carburettor
(e.g. by running empty).
● Unscrew the spark plug (see engine
instruction manual) and pour approx.
3 cm³ of engine oil into the engine via
the spark plug hole. Turn the engine
several times with the spark plug
removed (pull the recoil starter rope).
● Screw the spark plug back in (see
engine instruction manual).
● Perform an oil change (see engine
instruction manual).
● Store the machine in a dry and locked
place that is generally free of dust.
Make sure that it is out of the reach of
children.
13.1 Transporting
Lifting or carrying the machine
● A Handlebar installed: Hold the
machine at the front carrying handle (1)
and at the handlebar (2).
● B Handlebar folded down: Hold the
machine at the front carrying handle (1)
and at the lower handlebars (3).
Transporting the machine
Only transport the machine on all
four wheels, on a clean, level load floor.
● Secure the machine against slipping
using suitable fastening materials.
Fasten ropes or straps at the front
carrying handle (1) and at the lower
handlebars (3).
Important information on maintenance
and care of the product group
petrol lawn mowers (STIHL RM)
STIHL assumes no liability for material or
personal damage caused by the non-
observance of information contained in the
operating instructions, in particular with
regard to safety, operation and
maintenance, or which arise through the
use of unauthorised attachment or spare
parts.
Please always observe the following
important information for the prevention of
damage or excessive wear to your STIHL
machine:
1. Wearing parts
Some parts of the STIHL machine are
subject to normal wear even when used
properly and must be replaced in due time
depending on type and duration of use.
These include:
– Mowing blades
– V-belt (RM 2 RT)
–Tyres
2. Compliance with the information in
this instruction manual
The STIHL machine must be used,
maintained and stored with the care
described in this instruction manual. Any
damage caused by non-compliance with
the safety, operating and maintenance
instructions is the sole responsibility of the
user.
This applies in particular to:
Fire hazard!
Keep the spark plug socket away
from the spark plug hole due to the
danger of ignition.
13. Transport
Risk of injury!
Observe the section "For your
safety" before transporting. (Ö 4.4)
Carry the machine only with the
help of a second person. Always
wear suitable safety clothing
(safety shoes, thick gloves).
Detach the spark plug socket
before lifting or transporting.
15
14. Minimising wear and
preventing damage